|
RealVision 3D Transducer Extension Cable - 3M(10')
RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers. Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end. For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run.
|
117.60 |
|
|
RealVision 3D Transducer Extension Cable - 8M(26')
RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers. Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end. For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run.
|
199.42 |
|
|
RealVision 3D Transducer Extension Cable - 5M(16')
RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers. Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end. For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run.
|
127.82 |
|
|
CP470/CP570 Transducer Extension Cable - 5M
Raymarine's 5M transducer extension cable specifically for CP470 and CP570.
|
81.80 |
|
|
RealVision 3D™ Bronze Thru-Hull Transducer Pair Pack - 20° - 8M Cable & Y-Cable
Designed for inboard or outboard boats, the RV-220 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.
The RV-220 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-220 system also has a built-in fast response water temperature sensor for quick, accurate readings.
Raymarine’s RV-220 Bronze Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 13° to 20°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-220 system works great on trailered boats too.
The RV-220 system features rugged cast-bronze through hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2M pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10M (33'.)
What’s in the Box?
RV-220P Bronze Port Transducer with 2M cable
RV-220S Bronze Starboard Transducer with 2M cable
RealVision 3D Transducer Y-Cable
RealVision 3D 8M (26') Transducer Extension Cable
Anti-rotation bolt kit
Installation instructions
|
2269.99 |
|
|
RealVision 3D™ Bronze Thru-Hull Transducer Pair Pack - 12° - 8M Cable & Y-Cable
Designed for inboard or outboard boats, the RV-212 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.
The RV-212 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-212 system also has a built-in fast response water temperature sensor for quick, accurate readings.
Raymarine’s RV-212 Bronze Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 1° to 12°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-212 system works great on trailered boats too.
The RV-212 system features rugged cast-bronze through hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2M pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10M (33'.)
What’s in the Box?
RV-212P Bronze Port Transducer with 2M cable
RV-212S Bronze Starboard Transducer with 2M cable
RealVision 3D Transducer Y-Cable
RealVision 3D 8M (26') Transducer Extension Cable
Anti-rotation bolt kit
Installation instructions
|
2269.99 |
|
|
RV-312 RealVision™ 3D Transducers - Pair - Nylon Thru-Hull 12° Deadrise
The RV312 Thru-Hull Transducer from Raymarine provide RealVision Sonar to Compatible Axiom RV and Axiom PRO RVX Displays. View Structure and Fish with life-like quality of RV 3D Sonar. Designed for boats with a deadrise of 5°-15°.
|
1924.99 |
|
|
Jack Plate Mount for RV-100 RealVision 3D Transducer
The Raymarine RV-100 Jack Plate Mounting Kit is the perfect accessory for mounting the RealVision 3D RV-100 transducer onto bass boats, flats boats and other shallow-draft, high-speed, outboard motor-powered boats. The bracket is made from marine grade stainless-steel and is pre-drilled to ensure a suitable fit on a wide variety of jack plate models. Bolts, washers, Nylock nuts and detailed instructions are included to complete the installation.
|
89.99 |
|
|
Transducer Extension Cable for CP470/CP570 Wide CHIRP Transducers - 3M
Features:
Speed, Depth and Temperature
3M
Specifically for Raymarine's CP470 and CP570 Wide CHIRP Transducers
|
61.36 |
|
|
Transducer Extension Cable for CP470/CP570 Wide CHIRP Transducers - 10M
Features:
Speed, Depth and Temperature
10M
Specifically for Raymarine's CP470 and CP570 Wide CHIRP Transducers
|
129.98 |
|
|
Transducer Extension Cable - 4m
Adds 4 meters of length to the transducer cable.
Used with the CPT-60 Dragonfly transducer. For maximum performance, Dragonfly is supplied complete with Raymarine's exclusive CPT-60 dual element CHIRP transducer.
|
35.78 |
|
|
4M Transducer Extension Cable f/CHIRP & DownVision™
Use Raymarine's 4 Meter extension cable when the transducer will not reach you CP100.
|
40.90 |
|
|
EC M10 Transducer Extension Cable - 10'
10' extension cable for transducers.
Current Models: ICE HELIX, ICE Flashers, PiranhaMAX, HELIX 5, HELIX 7, HELIX 9, HELIX 10, HELIX 12
Discontinued Series: 500 Series, 600 Series, 700 Series, 800 Series, 900 Series, 1100 Series
Length: 10'
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
45.53 |
|
|
Transducer Extension Cable, 5 meter
Adds 5 meters of length to the stock transducer cable.
Works with the L755, L760, L770, L1250, L1260, and DSM compatible systems.
|
117.60 |
|
|
Transducer Extension Cable
Use this 10' (3M) extension cable to connect your 4-pin transducer to your sonar unit.
Compatible Devices:
echo™ 100
echo™ 150
echo™ 200
echo™ 300c
echo™ 500c
echo™ 550c
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
33.59 |
|