30" Hose & Fitting Kit Including Orb & NPT Helm Fittings Hydraulic Hose & Fittings Kit Includes: (2) - 30" Flexible High Pressure Hyd. Hose's (1) - 30" Flexible Low Pressure Hyd. Hose O.R.B Helm fitting kit NPT helm fitting kit 

Autopilot Pump Fitting Kit for ORB Systems with SteadySteer Switch Fitted hose kit designed for simplified SteadySteer installations into ORB steering systems, reducing the incidence of faulty field terminated hydraulic hoses and incorrect installation layouts. SteadySteer Benefits: Control the autopilot using the helm – enhanced usability Steer manually through turns - a convenient manual override Hassle-free Autopilot reengagement - reengages automatically on straight legs Seamless and intuitive boat control Increased convenience without sacrificing safety with SteadySteer – a functionality for autopilot systems that enables immediate, manual control of a vessel through turns without disengaging the autopilot. Coming out of turns, SteadySteer automatically reengages the autopilot once a new heading is established – no key-presses required. Navigate safely with SteadySteer, a functionality for autopilot systems that allows boaters to take immediate, manual control of the vessel through turns without having to disengage the autopilot. Coming out of turns, SteadySteer automatically reengages the autopilot once a new heading is established. Control the Autopilot with the Helm SteadySteer automatically disengages the autopilot when you turn the vessel manually and then reengages the autopilot when you have established a new heading.  No key-presses, no alarms – just turn the helm. Fewer Distractions – Just Drive No need to look at a display or push buttons to change course, merely point the bow at your destination. Kit Contains: 2 x Hoses 5/16" dia. (Black) 1500 PSI max, 810mm (31.9”),  9/16”-18 UNF to 9/16”-18 UNF 2 x Hoses 5/16" dia. (Black) 1500 PSI max, 360mm (14.2”) 9/16”-18 UNF to 9/16”-18 UNF 2 x T Connector ORB-5 to 9/16”-18UNF > 9/16”-18 UNF 1 x Right angle connector ORB-05 to 9/16”-18 UNF 2 x Adaptor ¼” NPT to 9/16”-18 UNF 1 x SteadySteer Flow Sensor 1 x Bottle of Hydraulic Fluid 1 x Filter Funnel

Verado Autopilot Fitting Kit for MK2 Pumps Verado steering system autopilot fitting kit for MKII Pumps 1, 2, 3, 4 & 5. Fitted with Verado O-Ring Face Seal fittings use don Verado steering systems.  Fitted hose kit designed for simplified Verado Autopilot installations, reducing the incidence of faulty field terminated hydraulic hoses and incorrect installation layouts. Kit Contains: 3 x Hose ¼” 3000 PSI max, 915 mm (36"), 9/16” UNF to 9/16” ORFS 2 x Hoses ¼” 3000 PSI max, 380mm (15”),  9/16” ORFS to 9/16” ORFS 1 x Return Hose 3/8” 2250 PSI max, 390mm (15.4”),11/16” ORFS to 11/16” ORFS 2 x T Connectors: Stainless: 9/16” ORFS 1 x T Connector: Brass: 11/16” ORFS > 11/16” ORFS > 9/16” ORFS

Flojet 02840-000-Garden Hose Fitting Water Sys 115V 4.5/40 Sw  Flojet- Diaphragm Pump Water Booster System 115V, 4.5GPM, 40psi Switch, 1.1 Gallon Accumulator Tank, with Garden Hose Fittings

Flush Pro Valve Kit - 5/8" Finally! Freshwater flushing of your inboard is as simple as connecting a garden hose. Features: Polymer Stainless Steel Spring Flush your boat engine safely and easily Transparent body allows for visual inspection of water flow Durable check valve system activated by water pressure from a garden hose Check valve automatically shuts off hull intake when water pressure is applied Adapter supplied with Flush Pro make winterizing your boat easy Can be used with on board generators Available for Standard 5/8" Hose Sizes Kit Includes: Water Inlet Fitting (Part #0499)

Flush Pro Valve Kit - 1" Finally! Fresh flushing of your inboard is as simple as connecting a garden hose. Features: Polymer Stainless Steel Spring Flush your boat engine safely and easily Transparent body allows for visual inspection of water flow Durable check valve system activated by water pressure from a garden hose Check valve automatically shuts off hull intake when water pressure is applied Adapter supplied with Flush Pro make winterizing your boat easy Can be used with on board generators Available for Standard 1" Hose Sizes Kit Includes: Water Inlet Fitting (Part #0499)

Flush Pro Valve Kit - 1-1/4" Finally! Freshwater flushing of your inboard is as simple as connecting a garden hose. Features: Polymer Stainless Steel Spring Flush your boat engine safely and easily Transparent body allows for visual inspection of water flow Durable check valve system activated by water pressure from a garden hose Check valve automatically shuts off hull intake when water pressure is applied Adapter supplied with Flush Pro make winterizing your boat easy Can be used with on board generators Available for Standard 1-1/4" Hose Sizes Kit Includes: Water Inlet Fitting (Part #0499)

Boat Leveler to Bennett Actuator Conversion Kit - Hydraulic to Hydraulic Bennett Marine's V351CK conversion kit replaces Boat Leveler cylinders with Bennett though-hull fittings. Kit includes: 2 hydraulic cylinders and all hardware to convert your system 2 stainless steel conversion brackets 8 1/4-20 x 1/2 machine screws 4 1/4-20 x 3/4 wood screws 2 3" pipe nipples 2 female barb fittings 2 actuators WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RhinoFlex 10’ Clean Out Hose with Rinser Cap - 5/8" Internal Diameter The Camco RhinoFlex 10-Foot RV Clean Out Hose with Rinser Cap allows users to rinse the sewer hose after dumping it for more sanitary storage. The Hose Rinser Cap attaches to any 3-inch bayonet fitting and creates a watertight seal. It features a 4-way water pressure blaster for better cleaning, a water shut-off valve, and four ergonomic wings for easy installation and removal. The Rhino grey water hose is bright orange, so it doesn’t get mixed up with drinking water hoses. The kit includes a rinser cap and a 10-foot hose. Features: Meant for rinsing an RV sewer hose after dumping for more sanitary storage The powerful hose rinser cap is designed with a 4-way water pressure blaster for better cleaning, a water shut-off valve, and four ergonomic wings for easy grip The water hose is 10 feet long with a 5/8-inch internal diameter 6-3/16- x 6-3/16 inches of usable support area

Major Rebuild Kit for Sherwood G-30-2 This kit contains the following items   MS DATA SHEET 1 DATA SHEET SH 10515C 1 SCREW & WASHER SH 12211 2 BALL BEARING SH 12231 1 O'RING SH 12615 1 HUB SH 12710 3 LOCKWASHER SH 12791 1 PIN SH 12855 1 GASKET SH 12857 3 SCREW SH 12859 1 SEAL/SEAT ASSEMBLY SH 15883 1 CAM BRASS SH 25150 1 WEAR PLATE SH 4258 3 SNAP RING (SMALL) SH 4259 2 SNAP RING (LARGE) SH 4264 1 WASHER SH 4432 1 KEY SH 5133 1 SPACER SH 9959K 1 IMPELLER KIT     Kits are put together at time of order

Major Rebuild Kit for Sherwood G-30-2B This kit contains the following items   MS DATA SHEET 1 DATA SHEET SH 10515C 1 SCREW & WASHER SH 12231 1 O'RING SH 12710 3 LOCKWASHER SH 12791 1 PIN SH 12857 3 SCREW SH 12859 1 SEAL/SEAT ASSEMBLY SH 15883 1 CAM BRASS SH 23448 2 BEARING SH 25150 1 WEAR PLATE SH 4258 2 SNAP RING (SMALL) SH 4259 2 SNAP RING (LARGE) SH 4264 1 WASHER SH 4432 1 KEY SH 5133 1 SPACER SH 9959K 1 IMPELLER KIT     Kits are put together at time of order

Little Giant Biomedia Media Kit 566112 Little Giant BM-30-PW Bioball Media Kit Annual maintenance is critical for keeping your Little Giant PF Pressurized pond filter working efficiently. Replace your biomedia for the Little Giant PF-800, PF-1200 and PF-2400 and ensure that the filter is working at the highest efficiency and keeping your pond looking clean and clear.   Bioballs - Biomedia - BM-30-PW Fits the Little Giant PF-800, PF-1200, PF-2400 Filters as well as many other filters that use the bioball type media. Each bioball measures approx 1-1/2" diameter Includes about 30 balls

Minor Repair Kit for Sherwood G-30-2 This kit contains the following items   SH 12859 1 SEAL/SEAT ASSEMBLY SH 9959K 1 IMPELLER KIT     Kits are put together at time of order

Hypro 9910-Kit-1916, O'Ring Kit   9910-KIT1916 Includes:   Qty 4 9910-620030 O-Ring   Qty 1 9910-620210 O-Ring   Qty 2 9910-180101 O-Ring   Qty 1 9910-550040 O-Ring   Qty 2 9910-550350 O-Ring   Qty 4 9910-390060 O-Ring   Qty 1 9910-650542 O-Ring   Qty 1 9910-390290 O-Ring   Qty 1 9910-740290 O-Ring  

Hypro 9910-Kit-1919, D50 O-Ring Kit 9910-KIT1919 Includes:   Qty 1 9910-650920 O-Ring Qty 2 9910-180101 O-Ring Qty 5 9910-550040 O-Ring Qty 4 9910-320030 O-Ring Qty 1 9910-650542 O-Ring Qty 1 9910-390290 O-Ring Qty 1 9910-740290 O-Ring Qty 1 9910-550350 O-Ring Image may not represent exact kit contents