|
X-Series X16 - Colors LEDs
The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colors option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
5,800 Lumens / 4,500 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours of scrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 65' (20M)
Transom / Hull spacing: 2-4' (0.5-1.2M)
Transom quantity: 2-6
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 150 Metal Halide
Fixture Lumens* (total light output from a finished fixture): 4,500
Lumens: 5,800
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC
Approx. light penetration (avg. water quality): 40' (12M)
Approx. Light penetration (perfect water quality): 100' (30M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue or Colors
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 9.84" (250mm) x 4.29" (109mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.50kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: Chemically Resistant Optical Polymer
Lens material: Pilkington Optiwhite
Body construction: Machined (First Release)
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 16
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
470.59 |
|
|
X-Series X16 - Midnight Blue LEDs
The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
5,800 Lumens / 4,500 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 65' (20M)
Transom / Hull spacing: 2-4' (0.5-1.2M)
Transom quantity: 2-6
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 150 Metal Halide
Fixture Lumens* (total light output from a finished fixture): 4,500
Lumens: 5,800
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC
Approx. light penetration (avg. water quality): 40' (12M)
Approx. Light penetration (perfect water quality): 100' (30M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue or Colors
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 9.84" (250mm) x 4.29" (109mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.50kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: Chemically Resistant Optical Polymer
Lens material: Pilkington Optiwhite
Body construction: Machined (First Release)
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 16
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
443.99 |
|
|
X-Series X16 - White LEDs
The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
5,800 Lumens / 4,500 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 65' (20M)
Transom / Hull spacing: 2-4' (0.5-1.2M)
Transom quantity: 2-6
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 150 Metal Halide
Fixture Lumens* (total light output from a finished fixture): 4,500
Lumens: 5,800
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC
Approx. light penetration (avg. water quality): 40' (12M)
Approx. Light penetration (perfect water quality): 100' (30M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue or Colors
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 9.84" (250mm) x 4.29" (109mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.50kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: Chemically Resistant Optical Polymer
Lens material: Pilkington Optiwhite
Body construction: Machined (First Release)
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 16
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
443.99 |
|
|
X-Series X8 - Colors LEDs
The X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colors option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
2,900 Lumens / 2,300 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 50' (15M)
Transom / Hull spacing: 2-4' (0.5-1.2M)
Transom quantity: 2-6
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 50W Xenon
Fixture Lumens* (total light output from a finished fixture): 2,300
Lumens: 2,900
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC
Approx. light penetration (avg. water quality): 26' (8M)
Approx. Light penetration (perfect water quality): 72' (21+M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue or Colors
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 8.62" (219mm) x 3.07" (78mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.34kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: Chemically Resistant Optical Polymer
Lens material: Pilkington Optiwhite
Body construction: Machined (First Release)
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 8
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
371.99 |
|
|
X-Series X8 - White LEDs
The X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
2,900 Lumens / 2,300 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 50' (15M)
Transom / Hull spacing: 2-4' (0.5-1.2M)
Transom quantity: 2-6
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 50W Xenon
Fixture Lumens* (total light output from a finished fixture): 2,300
Lumens: 2,900
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC
Approx. light penetration (avg. water quality): 26' (8M)
Approx. Light penetration (perfect water quality): 72' (21+M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue or Colors
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 8.62" (219mm) x 3.07" (78mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.34kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: Chemically Resistant Optical Polymer
Lens material: Pilkington Optiwhite
Body construction: Machined (First Release)
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 8
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
324.00 |
|
|
X16 Stainless Steel Bezel
Optional Stainless Steel Bezel for X-Series X16 Underwater LED Light.
Specifications:
Warranty: 2 years
|
85.37 |
|
|
X-Series X4 - White LEDs
The OceanLED X-Series X4 combines brightness with affordability. Whether cruising or fishing, the X4 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X4 outputs an impressive 1,150 Fixture lumens from its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose Midnight Blue or Ultra White color options. one app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
1,450 Lumens / 1,150 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 30' (9M)
Transom / Hull spacing: 2-3' (0.5-1.0M)
Transom quantity: 2-4
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 150W metal halide
Fixture Lumens* (total light output from a finished fixture): 1,150
Lumens: 1,450
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 0.8A @ 12V DC - 0.4A @ 24V DC
Approx. light penetration (avg. water quality): 20' (6M)
Approx. Light penetration (perfect water quality): 45' (13+M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 5.4" (137mm) x 2.91" (74mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.70kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: AB2
Lens material: Pilkington Optiwhite
Body construction: Chemically resistant optical polymer
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 4
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
183.65 |
|
|
X-Series X8 - Midnight Blue LEDs
The X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
2,900 Lumens / 2,300 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 50' (15M)
Transom / Hull spacing: 2-4' (0.5-1.2M)
Transom quantity: 2-6
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 50W Xenon
Fixture Lumens* (total light output from a finished fixture): 2,300
Lumens: 2,900
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC
Approx. light penetration (avg. water quality): 26' (8M)
Approx. Light penetration (perfect water quality): 72' (21+M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue or Colors
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 8.62" (219mm) x 3.07" (78mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.34kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: Chemically Resistant Optical Polymer
Lens material: Pilkington Optiwhite
Body construction: Machined (First Release)
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 8
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
309.91 |
|
|
X-Series X4 - Midnight Blue LEDs
The OceanLED X-Series X4 combines brightness with affordability. Whether cruising or fishing, the X4 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X4 outputs an impressive 1,150 Fixture lumens from its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose Midnight Blue or Ultra White color options. one app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
1,450 Lumens / 1,150 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 30' (9M)
Transom / Hull spacing: 2-3' (0.5-1.0M)
Transom quantity: 2-4
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 150W metal halide
Fixture Lumens* (total light output from a finished fixture): 1,150
Lumens: 1,450
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 0.8A @ 12V DC - 0.4A @ 24V DC
Approx. light penetration (avg. water quality): 20' (6M)
Approx. Light penetration (perfect water quality): 45' (13+M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 5.4" (137mm) x 2.91" (74mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.70kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: AB2
Lens material: Pilkington Optiwhite
Body construction: Chemically resistant optical polymer
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 4
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
183.65 |
|
|
OceanDMX RC X-Series Colors 915MHz
The OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc.
Features:
User-friendly interface, easy and simple operation
Control up to 4 zones
Control of third-party DMX devices
3 programmable scenes
Can be controlled by a maximum of 8 different remotes
Pre-set 10 changing modes, with pause function (Colors only)
Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors.
Box Contents:
Remote control
Waterproof pouch
DMX Receiver
Control Cable
Terminator (Not included for X-Series)
DMX Junction Box (X-Series Only)
Installation Manual
|
573.91 |
|
|
X-Series DMX Junction Box
For use in-conjunction with OceanLED Colours APP and DMX controller. Allows for up to 4 DMX connections to OceanLED Xtreme Series DMX Colours Lights per Junction Box. Can be linked to further DMX junction boxes to connect a series of LED Lights.
Features:
12/24v DC
IP66
4x Fused Power/DMX outputs (4A max power output)
Built-in DMX terminator
DMX input/output to allow multiple expansion
To be used in conjunction with OceanLED Xtreme Series DMX Colours
Robust Polycarbonate Design
See-through lid to view connections
Semi-transparent LID
Specifications:
Warranty: 2 years
|
240.00 |
|
|
OceanConnect Junction Box
The OceanConnect is a waterproof (IP66) DMX-controlled, low-voltage DC (9–32V) junction box.
The OceanConnect provides one power unit and four individually switched fused power outputs (6 amps per output) to connect DC-powered lights or other DC-switched units. The unit also supports powering and individual addressing of up to four DMX-controlled OceanLED X-Series lights.
Contents:
1x OceanConnect unit, including 4x 7.5A blade fuses
4x mounting screws
1x twin entry cable grommet
4x blanking plugs
Specifications:
Voltage: 12/24V DC (max 32V DC)
Input/Output Cable Glands: 1x M20-Power In, 4x M16 - DMX In/Out, and Lights Out
Power Input Terminals Wire Gauge: 8-20 AWG
DMX In/Out, and Lights Out Terminals Wire Gauge: 12-28 AWG
Light Outputs: DMX & Power- 4 x individual fused 6 Amp each max
DMX Input: 1x DMX Input (to connect the DMX controller)
DMX Output: 1x DMX Output (to link junction boxes in the chain)
DMX Terminator: Onboard DMX terminator with an on/off switch
Physical Specifications
Dimensions (Including Cable Glands): 228mm x 174mm x 60mm (9" x 6.8" x 2.3")
Enclosure: IP66-robust polycarbonate
Weight: 270g
|
340.30 |
|
|
X4 Stainless Steel Bezel
Optional Stainless Steel Bezel for X-Series X4 Underwater LED Light.
Specifications:
Warranty: 2 years
|
60.26 |
|
|
X8 Stainless Steel Bezel
Optional Stainless Steel Bezel for X-Series X8 Underwater LED Light.
Specifications:
Warranty: 2 years
|
71.87 |
|
|
Headhunter XRS-124 X-CAL 12/24V Pump
X-Caliber – 12-24V DC Water Pressure Pump
Quiet, reliable, blasting water pressure. Combining advanced DC motor and control technology with a proven self-priming centrifugal pump, the X-caliber surges past the competition with a flood of features.
A built in microprocessor interfaced with a rugged ceramic temperature and pressure sensor provides variable speed operation, prevents dry running damage and ensures complete electrical protection.
Part#Description
XRS-124X-Caliber 12-24 VDC Saltwater Pressure System
Control Panel:
Program power and pressure settings via the integrated control panel. Four colored LED’s display current settings and alarm conditions.
Advanced Features:
Adjustable cut in pressure
Adjustable power setting
Operates on 12 or 24VDC
Over voltage protection
Under voltage protection
Over current protection
Anti-flooding protection
Dry run protection
Variable Speed
Rotating bracket
Product Details/Specifications:
Liquid Temp
32°F (0°c)-104°F (40°c)
Ambient Temp
32°F (0°c)-122°F (50°c)
Max Pressure 67 PSI (4.5 bar)
Max Flow 10 GPM (38 lpm)
Suction/Discharge 3/4” FPT (Optional metric adapter)
Weight 16lbs (7.2 kg)
Dimensions 15”(382mm)L 8”(203mm)W 7”(178mm)H
|
2422.73 |
|