|
X-Series X16 - Midnight Blue LEDs
The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
5,800 Lumens / 4,500 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 65' (20M)
Transom / Hull spacing: 2-4' (0.5-1.2M)
Transom quantity: 2-6
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 150 Metal Halide
Fixture Lumens* (total light output from a finished fixture): 4,500
Lumens: 5,800
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC
Approx. light penetration (avg. water quality): 40' (12M)
Approx. Light penetration (perfect water quality): 100' (30M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue or Colors
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 9.84" (250mm) x 4.29" (109mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.50kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: Chemically Resistant Optical Polymer
Lens material: Pilkington Optiwhite
Body construction: Machined (First Release)
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 16
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
443.99 |
|
|
X-Series X4 - Midnight Blue LEDs
The OceanLED X-Series X4 combines brightness with affordability. Whether cruising or fishing, the X4 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X4 outputs an impressive 1,150 Fixture lumens from its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose Midnight Blue or Ultra White color options. one app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
1,450 Lumens / 1,150 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 30' (9M)
Transom / Hull spacing: 2-3' (0.5-1.0M)
Transom quantity: 2-4
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 150W metal halide
Fixture Lumens* (total light output from a finished fixture): 1,150
Lumens: 1,450
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 0.8A @ 12V DC - 0.4A @ 24V DC
Approx. light penetration (avg. water quality): 20' (6M)
Approx. Light penetration (perfect water quality): 45' (13+M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 5.4" (137mm) x 2.91" (74mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.70kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: AB2
Lens material: Pilkington Optiwhite
Body construction: Chemically resistant optical polymer
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 4
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
183.65 |
|
|
X-Series X8 - Midnight Blue LEDs
The X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
2,900 Lumens / 2,300 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 50' (15M)
Transom / Hull spacing: 2-4' (0.5-1.2M)
Transom quantity: 2-6
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 50W Xenon
Fixture Lumens* (total light output from a finished fixture): 2,300
Lumens: 2,900
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC
Approx. light penetration (avg. water quality): 26' (8M)
Approx. Light penetration (perfect water quality): 72' (21+M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue or Colors
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 8.62" (219mm) x 3.07" (78mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.34kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: Chemically Resistant Optical Polymer
Lens material: Pilkington Optiwhite
Body construction: Machined (First Release)
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 8
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
309.91 |
|
|
X-Series X16 - Colors LEDs
The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colors option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
5,800 Lumens / 4,500 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours of scrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 65' (20M)
Transom / Hull spacing: 2-4' (0.5-1.2M)
Transom quantity: 2-6
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 150 Metal Halide
Fixture Lumens* (total light output from a finished fixture): 4,500
Lumens: 5,800
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC
Approx. light penetration (avg. water quality): 40' (12M)
Approx. Light penetration (perfect water quality): 100' (30M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue or Colors
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 9.84" (250mm) x 4.29" (109mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.50kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: Chemically Resistant Optical Polymer
Lens material: Pilkington Optiwhite
Body construction: Machined (First Release)
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 16
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
470.59 |
|
|
X-Series X16 - White LEDs
The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
5,800 Lumens / 4,500 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 65' (20M)
Transom / Hull spacing: 2-4' (0.5-1.2M)
Transom quantity: 2-6
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 150 Metal Halide
Fixture Lumens* (total light output from a finished fixture): 4,500
Lumens: 5,800
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC
Approx. light penetration (avg. water quality): 40' (12M)
Approx. Light penetration (perfect water quality): 100' (30M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue or Colors
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 9.84" (250mm) x 4.29" (109mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.50kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: Chemically Resistant Optical Polymer
Lens material: Pilkington Optiwhite
Body construction: Machined (First Release)
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 16
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
443.99 |
|
|
X-Series X4 - White LEDs
The OceanLED X-Series X4 combines brightness with affordability. Whether cruising or fishing, the X4 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X4 outputs an impressive 1,150 Fixture lumens from its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose Midnight Blue or Ultra White color options. one app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
1,450 Lumens / 1,150 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 30' (9M)
Transom / Hull spacing: 2-3' (0.5-1.0M)
Transom quantity: 2-4
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 150W metal halide
Fixture Lumens* (total light output from a finished fixture): 1,150
Lumens: 1,450
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 0.8A @ 12V DC - 0.4A @ 24V DC
Approx. light penetration (avg. water quality): 20' (6M)
Approx. Light penetration (perfect water quality): 45' (13+M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 5.4" (137mm) x 2.91" (74mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.70kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: AB2
Lens material: Pilkington Optiwhite
Body construction: Chemically resistant optical polymer
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 4
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
183.65 |
|
|
X-Series X8 - White LEDs
The X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
2,900 Lumens / 2,300 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 50' (15M)
Transom / Hull spacing: 2-4' (0.5-1.2M)
Transom quantity: 2-6
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 50W Xenon
Fixture Lumens* (total light output from a finished fixture): 2,300
Lumens: 2,900
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC
Approx. light penetration (avg. water quality): 26' (8M)
Approx. Light penetration (perfect water quality): 72' (21+M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue or Colors
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 8.62" (219mm) x 3.07" (78mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.34kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: Chemically Resistant Optical Polymer
Lens material: Pilkington Optiwhite
Body construction: Machined (First Release)
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 8
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
324.00 |
|
|
X-Series X8 - Colors LEDs
The X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colors option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
2,900 Lumens / 2,300 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
Boat size: up to 50' (15M)
Transom / Hull spacing: 2-4' (0.5-1.2M)
Transom quantity: 2-6
Hull quantity: 4-8" (10-20cm)
Maximum hull thickness: N/A
Installation depth (to top of fixture): 300mm below water line
In water fitting: No
Technical
Light output equivalent to: 50W Xenon
Fixture Lumens* (total light output from a finished fixture): 2,300
Lumens: 2,900
Beam angle: 60° circular
Typical LED life expectancy: 40,000 hours
Minimum-Maximum operating voltage DC: 9 - 32 V DC
Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC
Approx. light penetration (avg. water quality): 26' (8M)
Approx. Light penetration (perfect water quality): 72' (21+M)
Driver type: Internal
Driver size (L x W x H): N/A
Color options: Ultra White - Midnight Blue or Colors
Correlated Color Temp: 6500 K - 450 nm
IP Rating: IP68
Fish strobe: YES
Anti fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Physical
Size: 8.62" (219mm) x 3.07" (78mm)
Depth: 0.86" (22mm)
Total weight including electrical driver: 0.34kg
Extension cable length (standard-hard wired to light): 9-7/64' (3M)
Hole cut-out for cable entry: 1/2" (12.5mm)
Material: Chemically Resistant Optical Polymer
Lens material: Pilkington Optiwhite
Body construction: Machined (First Release)
Bezel material: Plastic
Bezel thickness: N/A
Bezel options: Stainless Steel Bezel Optional
Bezel color: White
Drag factor: N/A
Optics: Collimator
No of LEDs: 8
Certification: EMC Approved
CE Approved: Yes
Specifications:
Warranty: 2 years
|
371.99 |
|
|
Sport S3124s Underwater LED Light - Ultra White/Midnight Blue
The OceanLED Sport series is the perfect choice for fishing and cruising in small to medium sized boats.
Advanced optics, designed exclusively by OceanLED create an optically efficient 90°surface beam angle with a focused 20° side beam displaying a striking amount of water penetration and a significantly larger illuminated area. With twice the amount of LEDs as its competitors, the dual color S3124s is the leader in its class. Simply toggle the power between white, blue, strobe and fade modes.
Features:
3000 Fixture Lumens
90°/20° Beam Angle
Compact and simple design
Simple to install
Easy to clean
Fish-Strobe Mode
Fade Mode
Specifications:
Warranty: 2 years
|
517.50 |
|
|
Sport 3116d DockLight - Midnight Blue
The OceanLED Sport DockLight is the perfect underwater LED light to create a stunning light display at your dock.
Packing an impressive 5,000 fixture lumens into a small body, combined with advanced optics, creates a truly remarkable ‘Best-In-Class’ performance.
Compact, simple design with a small footprint. Easy to install and maintain with a choice of standard fixed dock or optional floating dock brackets.
Features:
Brightest dock light in its class provides safety and security at your dock
Create a stunning backdrop to your dock parties
Increase interest and value in your property with stunning pictures for any marketing material
11,600 Lumens / 5,000 Fixture Lumens - Best-in-class performance from this ultrabright light makes it the obvious choice for those who want to stand out
90°/20° Beam Angle - A true wide-angled, focused beam lights up a large area of the water around the dock
Compact & Simple Design - Made from corrosion resistant Alu Bronze, there is a lot packed into this 100mm / 4” light Simple plastic brackets keep footprint to a minimum
Simple to Install - A choice of fixed or floating brackets, depending on tidal factors or dock type
Easy to Clean - Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth, saving hours of scrubbing each time you use it. Optional Easi-Kleen floating bracket mechanism makes it simple to swing the light out of the water to clean
Active Thermal Control - ATC prevents overheating. In the event of overheating the ATC system will reduce the LED power level in order to protect the LEDs, or in extreme cases, turn off the fixture completely
Specifications:
Lumens: 11600
Fixture Lumens: 5000
Typical LED life expectancy: 40,000+ Hours
Minimum-Maximum operating voltage DC: 20-32V DC
Current / Amp draw (DC): 24V DC 2.4A
Driver type: Internal, Reverse Polarity Protected
Dock spacing: 5-10’ (1.5-3m)
Installation depth (To top of fixture): 12” (30cm)
Total weight: 1.2kg
Extension cable length (standard): 32.8” (10M)
Hole cut-out for cable entry: 0.5” (12.5mm)
Material: AB2 Aluminium Bronze
Specifications:
Warranty: 2 years
|
506.23 |
|
|
X16 Stainless Steel Bezel
Optional Stainless Steel Bezel for X-Series X16 Underwater LED Light.
Specifications:
Warranty: 2 years
|
85.37 |
|
|
Explore E2 Narrow Beam - Midnight Blue
The E2 is our latest addition to the Explore range, giving customers a compact smaller XFM light for tight installation spaces, but with all the build quality and premium features of the larger lights in the range.
Choice of Beam
With the E2, you can choose either the signature Explore Series wide-angle beam
(90° x 20° Elliptical), or a new narrow “laser” beam shape (20° Circular), depending on your desired effect.
Advanced Water Ingress Protection
The Explore E2 benefits from full IP69k Certification, the highest possible rating. Also, the rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern.
XFM Removal
The Explore E2 has the same XFM capabilities as the larger lights in the range, being able to remove the light body for maintenance or upgrades, without the need to haul the boat.
Control your Explore E2 lights
Control your Explore E2 lights via the 3rd party switch or push button of your choice.
Features:
Elliptical 90° / 20° Wide Beam Option
Circular 20° Beam Option
Up to 3000 Fixture Lumens
Compact design and built-in driver.
Ultra-low profile outer bezel.
IP69k Certification + In-hull Temporary Submersion Protection
Specifications:
Fixture Lumens* (total light output from a finished fixture): 3000
Beam angle (Wide): 90° / 20 ° Elliptical
Beam angle (Narrow): 20° Circular
IP Rating: IP69k
Minimum-Maximum operating voltage DC: 10-30V DC
Current / Amp draw (DC): 3.5A@12V DC / 1.5A@24V DC
Driver type: Internal
Correlated Color Temp: 6500k (White)
Rear Temporary Submersion Protection: Yes
Fish Strobe: Yes
Anti-fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Mounting Recommendations:
Boat size: Up to 20m (65’)
Transom / Hull spacing: 1 - 1.5m (3-5’)
Installation depth below waterline: 25-30cm (10-12”)
Maximum Hull Thickness: 60mm (2.4”)
Physical:
Total weight: 0.8kg (1.76lbs)
Total Diameter (Including Bezel): 80mm (3.15”)
Diameter Of Body: 59mm (2.32”)
Profile Of Fixture: 3.5mm (0.14”)
Overall Length: 101.5mm (4”)
Minimum Space Required Inside The Hull: 172mm (6.78”)
Hole Cut-Out: 60mm (2.37”)
Material (Mounting Tube / Bezel): AB2 Aluminium Bronze
Material (Light Body): AB2
Lens: Glass
Optics (Wide Beam Option): Hybrid Collimated
Optics (Narrow Beam Option): Collimated
CE Approved: Yes
|
918.00 |
|
|
Explore E2 Wide Beam - Midnight Blue
The E2 is our latest addition to the Explore range, giving customers a compact smaller XFM light for tight installation spaces, but with all the build quality and premium features of the larger lights in the range.
Choice of Beam
With the E2, you can choose either the signature Explore Series wide-angle beam
(90° x 20° Elliptical), or a new narrow “laser” beam shape (20° Circular), depending on your desired effect.
Advanced Water Ingress Protection
The Explore E2 benefits from full IP69k Certification, the highest possible rating. Also, the rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern.
XFM Removal
The Explore E2 has the same XFM capabilities as the larger lights in the range, being able to remove the light body for maintenance or upgrades, without the need to haul the boat.
Control your Explore E2 lights
Control your Explore E2 lights via the 3rd party switch or push button of your choice.
Features:
Elliptical 90° / 20° Wide Beam Option
Circular 20° Beam Option
Up to 3000 Fixture Lumens
Compact design and built-in driver.
Ultra-low profile outer bezel.
IP69k Certification + In-hull Temporary Submersion Protection
Specifications:
Fixture Lumens* (total light output from a finished fixture): 3000
Beam angle (Wide): 90° / 20 ° Elliptical
Beam angle (Narrow): 20° Circular
IP Rating: IP69k
Minimum-Maximum operating voltage DC: 10-30V DC
Current / Amp draw (DC): 3.5A@12V DC / 1.5A@24V DC
Driver type: Internal
Correlated Color Temp: 6500k (White)
Rear Temporary Submersion Protection: Yes
Fish Strobe: Yes
Anti-fouling properties: Tritonium coated lens
LED Manufacturer: CREE
Mounting Recommendations:
Boat size: Up to 20m (65’)
Transom / Hull spacing: 1 - 1.5m (3-5’)
Installation depth below waterline: 25-30cm (10-12”)
Maximum Hull Thickness: 60mm (2.4”)
Physical:
Total weight: 0.8kg (1.76lbs)
Total Diameter (Including Bezel): 80mm (3.15”)
Diameter Of Body: 59mm (2.32”)
Profile Of Fixture: 3.5mm (0.14”)
Overall Length: 101.5mm (4”)
Minimum Space Required Inside The Hull: 172mm (6.78”)
Hole Cut-Out: 60mm (2.37”)
Material (Mounting Tube / Bezel): AB2 Aluminium Bronze
Material (Light Body): AB2
Lens: Glass
Optics (Wide Beam Option): Hybrid Collimated
Optics (Narrow Beam Option): Collimated
CE Approved: Yes
|
918.00 |
|
|
OceanDMX RC X-Series Colors 915MHz
The OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc.
Features:
User-friendly interface, easy and simple operation
Control up to 4 zones
Control of third-party DMX devices
3 programmable scenes
Can be controlled by a maximum of 8 different remotes
Pre-set 10 changing modes, with pause function (Colors only)
Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors.
Box Contents:
Remote control
Waterproof pouch
DMX Receiver
Control Cable
Terminator (Not included for X-Series)
DMX Junction Box (X-Series Only)
Installation Manual
|
573.91 |
|
|
X-Series DMX Junction Box
For use in-conjunction with OceanLED Colours APP and DMX controller. Allows for up to 4 DMX connections to OceanLED Xtreme Series DMX Colours Lights per Junction Box. Can be linked to further DMX junction boxes to connect a series of LED Lights.
Features:
12/24v DC
IP66
4x Fused Power/DMX outputs (4A max power output)
Built-in DMX terminator
DMX input/output to allow multiple expansion
To be used in conjunction with OceanLED Xtreme Series DMX Colours
Robust Polycarbonate Design
See-through lid to view connections
Semi-transparent LID
Specifications:
Warranty: 2 years
|
240.00 |
|