X-Series X8 - White LEDs The X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area. Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 2,900 Lumens / 2,300 Fixture Lumens: Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd. 60° Beam Angle A wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to Clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Mounting Recommendations Boat size: up to 50' (15M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 50W Xenon Fixture Lumens* (total light output from a finished fixture): 2,300 Lumens: 2,900 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC Approx. light penetration (avg. water quality): 26' (8M) Approx. Light penetration (perfect water quality): 72' (21+M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 8.62" (219mm) x 3.07" (78mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.34kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 8 Certification: EMC Approved CE Approved: Yes Specifications: Warranty: 2 years

X-Series X8 - Midnight Blue LEDs The X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area. Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 2,900 Lumens / 2,300 Fixture Lumens: Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd. 60° Beam Angle A wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to Clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Mounting Recommendations Boat size: up to 50' (15M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 50W Xenon Fixture Lumens* (total light output from a finished fixture): 2,300 Lumens: 2,900 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC Approx. light penetration (avg. water quality): 26' (8M) Approx. Light penetration (perfect water quality): 72' (21+M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 8.62" (219mm) x 3.07" (78mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.34kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 8 Certification: EMC Approved CE Approved: Yes Specifications: Warranty: 2 years

X-Series X8 - Colors LEDs The X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area. Choose either a single color version from either Midnight Blue or Ultra White or pick our Colors option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 2,900 Lumens / 2,300 Fixture Lumens: Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd. 60° Beam Angle A wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to Clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Mounting Recommendations Boat size: up to 50' (15M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 50W Xenon Fixture Lumens* (total light output from a finished fixture): 2,300 Lumens: 2,900 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC Approx. light penetration (avg. water quality): 26' (8M) Approx. Light penetration (perfect water quality): 72' (21+M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 8.62" (219mm) x 3.07" (78mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.34kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 8 Certification: EMC Approved CE Approved: Yes Specifications: Warranty: 2 years

X-Series X4 - White LEDs The OceanLED X-Series X4 combines brightness with affordability. Whether cruising or fishing, the X4 gives stunning performance allowing you to enjoy more time on the water with family and friends. The X4 outputs an impressive 1,150 Fixture lumens from its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose Midnight Blue or Ultra White color options. one app, your choice is virtually limitless. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 1,450 Lumens / 1,150 Fixture Lumens: Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd. 60° Beam Angle A wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to Clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Mounting Recommendations Boat size: up to 30' (9M) Transom / Hull spacing: 2-3' (0.5-1.0M) Transom quantity: 2-4 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 150W metal halide Fixture Lumens* (total light output from a finished fixture): 1,150 Lumens: 1,450 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 0.8A @ 12V DC - 0.4A @ 24V DC Approx. light penetration (avg. water quality): 20' (6M) Approx. Light penetration (perfect water quality): 45' (13+M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 5.4" (137mm) x 2.91" (74mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.70kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: AB2 Lens material: Pilkington Optiwhite Body construction: Chemically resistant optical polymer Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 4 Certification: EMC Approved CE Approved: Yes Specifications: Warranty: 2 years

X-Series X16 - White LEDs The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends. The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 5,800 Lumens / 4,500 Fixture Lumens: Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd. 60° Beam Angle A wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to Clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Mounting Recommendations Boat size: up to 65' (20M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 150 Metal Halide Fixture Lumens* (total light output from a finished fixture): 4,500 Lumens: 5,800 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC Approx. light penetration (avg. water quality): 40' (12M) Approx. Light penetration (perfect water quality): 100' (30M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 9.84" (250mm) x 4.29" (109mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.50kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 16 Certification: EMC Approved CE Approved: Yes Specifications: Warranty: 2 years 

X-Series X4 - Midnight Blue LEDs The OceanLED X-Series X4 combines brightness with affordability. Whether cruising or fishing, the X4 gives stunning performance allowing you to enjoy more time on the water with family and friends. The X4 outputs an impressive 1,150 Fixture lumens from its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose Midnight Blue or Ultra White color options. one app, your choice is virtually limitless. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 1,450 Lumens / 1,150 Fixture Lumens: Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd. 60° Beam Angle A wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to Clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Mounting Recommendations Boat size: up to 30' (9M) Transom / Hull spacing: 2-3' (0.5-1.0M) Transom quantity: 2-4 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 150W metal halide Fixture Lumens* (total light output from a finished fixture): 1,150 Lumens: 1,450 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 0.8A @ 12V DC - 0.4A @ 24V DC Approx. light penetration (avg. water quality): 20' (6M) Approx. Light penetration (perfect water quality): 45' (13+M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 5.4" (137mm) x 2.91" (74mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.70kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: AB2 Lens material: Pilkington Optiwhite Body construction: Chemically resistant optical polymer Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 4 Certification: EMC Approved CE Approved: Yes Specifications: Warranty: 2 years

X8 Stainless Steel Bezel Optional Stainless Steel Bezel for X-Series X8 Underwater LED Light. Specifications: Warranty: 2 years 

X-Series X16 - Colors LEDs The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends. The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose either a single color version from either Midnight Blue or Ultra White or pick our Colors option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 5,800 Lumens / 4,500 Fixture Lumens: Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd. 60° Beam Angle A wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to Clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours of scrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Mounting Recommendations Boat size: up to 65' (20M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 150 Metal Halide Fixture Lumens* (total light output from a finished fixture): 4,500 Lumens: 5,800 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC Approx. light penetration (avg. water quality): 40' (12M) Approx. Light penetration (perfect water quality): 100' (30M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 9.84" (250mm) x 4.29" (109mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.50kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 16 Certification: EMC Approved CE Approved: Yes Specifications: Warranty: 2 years

X-Series X16 - Midnight Blue LEDs The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends. The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 5,800 Lumens / 4,500 Fixture Lumens: Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd. 60° Beam Angle A wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to Clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Mounting Recommendations Boat size: up to 65' (20M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 150 Metal Halide Fixture Lumens* (total light output from a finished fixture): 4,500 Lumens: 5,800 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC Approx. light penetration (avg. water quality): 40' (12M) Approx. Light penetration (perfect water quality): 100' (30M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 9.84" (250mm) x 4.29" (109mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.50kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 16 Certification: EMC Approved CE Approved: Yes Specifications: Warranty: 2 years

X-Series DMX Junction Box For use in-conjunction with OceanLED Colours APP and DMX controller. Allows for up to 4 DMX connections to OceanLED Xtreme Series DMX Colours Lights per Junction Box. Can be linked to further DMX junction boxes to connect a series of LED Lights. Features: 12/24v DC IP66 4x Fused Power/DMX outputs (4A max power output) Built-in DMX terminator DMX input/output to allow multiple expansion To be used in conjunction with OceanLED Xtreme Series DMX Colours Robust Polycarbonate Design See-through lid to view connections Semi-transparent LID Specifications: Warranty: 2 years

OceanConnect Junction Box The OceanConnect is a waterproof (IP66) DMX-controlled, low-voltage DC (9–32V) junction box. The OceanConnect provides one power unit and four individually switched fused power outputs (6 amps per output) to connect DC-powered lights or other DC-switched units. The unit also supports powering and individual addressing of up to four DMX-controlled OceanLED X-Series lights.  Contents: 1x OceanConnect unit, including 4x 7.5A blade fuses 4x mounting screws 1x twin entry cable grommet 4x blanking plugs Specifications: Voltage: 12/24V DC (max 32V DC) Input/Output Cable Glands: 1x M20-Power In, 4x M16 - DMX In/Out, and Lights Out Power Input Terminals Wire Gauge: 8-20 AWG DMX In/Out, and Lights Out Terminals Wire Gauge: 12-28 AWG Light Outputs: DMX & Power- 4 x individual fused 6 Amp each max DMX Input: 1x DMX Input (to connect the DMX controller) DMX Output: 1x DMX Output (to link junction boxes in the chain) DMX Terminator: Onboard DMX terminator with an on/off switch Physical Specifications Dimensions (Including Cable Glands): 228mm x 174mm x 60mm (9" x 6.8" x 2.3") Enclosure: IP66-robust polycarbonate Weight: 270g

X16 Stainless Steel Bezel Optional Stainless Steel Bezel for X-Series X16 Underwater LED Light. Specifications: Warranty: 2 years

X4 Stainless Steel Bezel Optional Stainless Steel Bezel for X-Series X4 Underwater LED Light. Specifications: Warranty: 2 years 

Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow. Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available. All-new sleek, modern design. First all modular system - extremely versatile. Easy to select and install for any radar, dome, light or camera combination. Easy to add accessories. Upgradable for future additions and modifications. Powder coated aluminum construction   Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer. The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."   See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )   Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.   SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686

A3 Amphibian A6 Amphibian A12 Amphibian The OceanLED Amphibian Series is the world's first lighting collection designed to be used both in and out of the water. Extremely powerful, but with ultra low power draw and no start-up current required. Exceptionally easy to install and versatile enough to be mounted onto any transom, under the gunnels, engine brackets, t-tops, on masts as uplighters, and even on trailers for night launching.  And best of all, OceanLED's Amphibian Series is on sale NOW...while supplies last!