Hydraulic Gear Pump 12V 6-9CI Cylinder From the design team that brought you the legendary Octopus hydraulic drives, our new gear pump offers industry leading reliability and performance in a smaller, lighter, quieter package. Features: Industry leading efficiency - lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units. Cost saving - the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units. The smaller footprint of the compact gear pump increases installation flexibility. Lower noise and vibration make the gear pump particularly suitable for sailboat installations. Suitable for balanced or unbalanced cylinders. All models available for both 12v and 24v systems. Specifications: Flow Rate: 600CC/min Voltage: 12 Volt Cylinder Range: 6-9ci CYLINDER Average Current Draw: 3.8A Operating Temperature: -15 to +75'C (5 - 167'F) Waterproofing: IP55 Ignition Protection: ISO 8846 & SAEJ1171 EMC Compliance: EN60945-9-2002

Hydraulic Gear Pump 12V 16-24CI Cylinder From the design team that brought you the legendary Octopus hydraulic drives, our new gear pump offers industry leading reliability and performance in a smaller, lighter, quieter package. Features: Industry leading efficiency - lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units. Cost saving - the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units. The smaller footprint of the compact gear pump increases installation flexibility. Lower noise and vibration make the gear pump particularly suitable for sailboat installations. Suitable for balanced or unbalanced cylinders. All models available for both 12v and 24v systems. Specifications: Flow Rate: 1600CC/min Voltage: 12 Volt Cylinder Range: 16-24ci CYLINDER Average Current Draw: 6.6A Operating Temperature: -15 to +75'C (5 - 167'F) Waterproofing: IP55 Ignition Protection: ISO 8846 & SAEJ1171 EMC Compliance: EN60945-9-2002

Hydraulic Gear Pump 12V 10-15CI Cylinder From the design team that brought you the legendary Octopus hydraulic drives, our new gear pump offers industry leading reliability and performance in a smaller, lighter, quieter package. Features: Industry leading efficiency - lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units. Cost saving - the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units. The smaller footprint of the compact gear pump increases installation flexibility. Lower noise and vibration make the gear pump particularly suitable for sailboat installations. Suitable for balanced or unbalanced cylinders. All models available for both 12v and 24v systems. Specifications: Flow Rate: 1000CC/min Voltage: 12 Volt Cylinder Range: 10-15ci CYLINDER Average Current Draw: 5A Operating Temperature: -15 to +75'C (5 - 167'F) Waterproofing: IP55 Ignition Protection: ISO 8846 & SAEJ1171 EMC Compliance: EN60945-9-2002

Hydraulic Gear Pump - 12V - 20-30CI Cylinder - 2000cc/min Gear Pump Offers Industry Leading Reliability and Performance in a Smaller, Lighter, Quieter Package. Features: High Efficiency – Industry leading efficiency minimizes power consumption Low Noise – New industry design offers significantly quieter operation Light Weight & Compact – Small footprint offers greater installation flexibility Wide Range Of Products – From 600 to 1600cc/min, 12v and 24v options Professional Solutions for Hydraulically Steered Boats: Industry Leading Efficiency – lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units. Cost Savings – the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units. The smaller footprint of the compact gear pump increases installation flexibility. Lower noise and vibration make the gear pump particularly suitable for sailboat installations. Suitable for balanced or unbalanced cylinders. All models available for both 12v and 24v systems.

Hydraulic Gear Pump - 12V - 30-40CI Cylinder Gear Pump Offers Industry-Leading Reliability and Performance in a Smaller, Lighter, Quieter Package. Features: High Efficiency – Industry-leading efficiency minimizes power consumption Low Noise – New industry design offers significantly quieter operation Light Weight & Compact – Small footprint offers greater installation flexibility Wide Range Of Products – From 600 to 1600cc/min, 12v and 24v options Professional Solutions for Hydraulically Steered Boats: Industry-Leading Efficiency – lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units. Cost Savings – the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units. The smaller footprint of the compact gear pump increases installation flexibility. Lower noise and vibration make the gear pump particularly suitable for sailboat installations. Suitable for balanced or unbalanced cylinders. All models are available for both 12v and 24v systems.

Hydraulic Gear Pump - 24V - 20-30CI Cylinder - 2000cc/min Gear Pump Offers Industry Leading Reliability and Performance in a Smaller, Lighter, Quieter Package. Features: High Efficiency – Industry leading efficiency minimizes power consumption Low Noise – New industry design offers significantly quieter operation Light Weight & Compact – Small footprint offers greater installation flexibility Wide Range Of Products – From 600 to 1600cc/min, 12v and 24v options Professional Solutions for Hydraulically Steered Boats: Industry Leading Efficiency – lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units. Cost Savings – the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units. The smaller footprint of the compact gear pump increases installation flexibility. Lower noise and vibration make the gear pump particularly suitable for sailboat installations. Suitable for balanced or unbalanced cylinders. All models available for both 12v and 24v systems.

Hydraulic Gear Pump - 24V - 16-24CI Cylinder Gear Pump Offers Industry-Leading Reliability and Performance in a Smaller, Lighter, Quieter Package. Features: High Efficiency – Industry-leading efficiency minimizes power consumption Low Noise – New industry design offers significantly quieter operation Light Weight & Compact – Small footprint offers greater installation flexibility Wide Range Of Products – From 600 to 1600cc/min, 12v and 24v options Professional Solutions for Hydraulically Steered Boats: Industry-Leading Efficiency – lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units. Cost Savings – the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units. The smaller footprint of the compact gear pump increases installation flexibility. Lower noise and vibration make the gear pump particularly suitable for sailboat installations. Suitable for balanced or unbalanced cylinders. All models are available for both 12v and 24v systems.

Autopilot Pump Type 1 Adjustable Reversing 12V Up To 15 CI Cylinder TWICE THE POWER The unique Octopus piston pump delivers over twice the hydraulic output per watt of input than a standard hydraulic gear pump. HALF THE POWER CONSUMPTION Gear pumps leak oil between the gears, while a piston (such as used in car engines) does not.  This means the piston pump will place the cylinder ram exactly where it is required, positioning the rudder accurately.  This gives far sharper steering, reducingunnecessary course corrections meaning battery consumption on Octopus pumps is up to half that of other pumps. PINPOINT ACCURACY Leading autopilot manufacturers choose Octopus pumps for their non RFB pilot systems which do not have a Rudder Feedback unit. Previously, slop in the system caused by gear leakage meant that a Rudder Feedback unit was necessary to tell the pilot the exact rudder position. As Octopus pumps will always bring the ram back to the required position the Rudder Feedback unit is not required, which also greatly simplifies installation. SAVE ON INSTALLATION COSTS A professional installation should always have a method of isolating the pump from the steering system - Octopus pumps feature inbuilt shut off valves in the pump manifold. ADJUSTABLE FLOW RATE A pump that does not have variable flow (unless dedicated to a range of cylinders such as our fixed 0.8L pump) will be operating too fast or too slow in 90% of cases.  Autopilot manufacturers get around this problem by adjusting the output to the pump to compensate, which either forces the pump to operate for longer periods of time which increases power consumption and wear on the parts, or it will operate at high pressure for short periods of time - also putting unnecessary strain and wear on the system. Octopus Variable Flow Reversing Pumps precisely control the speed of the ram, reducing unnecessary battery consumption, pressure, strain and wear on the hydraulic system. Getting the best steering performance for the boat. The flow rate of the pump can be set to get the best hard over time (cylinder ram speed) for the particular boat.  Features: Reliable - Piston pump technology with only three moving parts Twice the Power - Delivers over twice the hydraulic output per watt of input Half the Power Consumption - Accurate ram positioning means fewer course corrections Adjustable Flow Rate - Configure performance to suit your vessel Easy Servicing - Shut off valves allow removal without draining steering system

Autopilot Pump Type 3 Adjustable Reversing 12V Up to 30CI Cylinder Features: RELIABLE - Piston pump technology with only three moving parts TWIC THE POWER - Delivers over twice the hydraulic output per watt of input HALF THE POWER CONSUMPTION - Accurate ram positioning means fewer course corrections ADJUSTABLE FLOW RATE - Configure performance to suit your vessel EASY SERVICING - Shut off valves allow removal without draining steering system TWICE THE POWER The unique Octopus piston pump delivers over twice the hydraulic output per watt of input than a standard hydraulic gear pump. HALF THE POWER CONSUMPTION Gear pumps leak oil between the gears, while a piston (such as used in car engines) does not.  This means the piston pump will place the cylinder ram exactly where it is required, positioning the rudder accurately.  This gives far sharper steering, reducingunnecessary course corrections meaning battery consumption on Octopus pumps is up to half that of other pumps. PINPOINT ACCURACY Leading autopilot manufacturers choose Octopus pumps for their non RFB pilot systems which do not have a Rudder Feedback unit. Previously, slop in the system caused by gear leakage meant that a Rudder Feedback unit was necessary to tell the pilot the exact rudder position. As Octopus pumps will always bring the ram back to the required position the Rudder Feedback unit is not required, which also greatly simplifies installation. SAVE ON INSTALLATION COSTS A professional installation should always have a method of isolating the pump from the steering system - Octopus pumps feature inbuilt shut off valves in the pump manifold. ADJUSTABLE FLOW RATE A pump that does not have variable flow (unless dedicated to a range of cylinders such as our fixed 0.8L pump) will be operating too fast or too slow in 90% of cases.  Autopilot manufacturers get around this problem by adjusting the output to the pump to compensate, which either forces the pump to operate for longer periods of time which increases power consumption and wear on the parts, or it will operate at high pressure for short periods of time - also putting unnecessary strain and wear on the system. Octopus Variable Flow Reversing Pumps precisely control the speed of the ram, reducing unnecessary battery consumption, pressure, strain and wear on the hydraulic system.

NavPilot 300 with Octopus Pump 12V for Ram Sizes 7-12 Cubic Inch NavPilot 300 is not your ordinary Autopilot The NavPilot 300 is a revolutionary autopilot. With Fantum Feedback, NavPilot outboard installations no longer require use of a physical rudder feedback unit. This results in a streamlined, simplified installation. Combined with Furuno's unique adaptive learning technology, NavPilot 300 provides unmatched outboard Autopilot performance. Fantum Feedback is designed for planing and semi-displacement outboard vessels from 24 to 50 feet, with one to four outboard engines, where it achieves precise course control from slow trolling to speeds of well over 60 knots. The NavPilot 300/PG-S includes a 1.0L pumpset for boats with a single-cylinder steering system, as well as the PG700 Fluxgate Compass Heading Sensor with magnetic field distortion correction, providing highly accurate and stable heading information. Gesture Control - just push, point and shoot! The Gesture Controller is a revolutionary and unique way to steer your boat remotely. By using Bluetooth signals, it is possible to control the Autopilot from anywhere on the boat within 10 meters. Just push, hold the button, point to the desired heading and release to let the Autopilot redirect the boat! Versatile Display Modes on a vivid 4.1" Color LCD Display The SABIKI™ mode lets the autopilot control while you are drifting astern, so you can focus on fishing instead of steering. Maintaining heading astern while compensating for wind and tide, SABIKI™ mode is uniquely tailored for Sabiki fishing, jigging and bottom fishing. Other display modes include Furuno's Highway mode, Auto and Advanced Auto modes, and Fish Hunter mode, where one of four pre-programmed maneuvers can be performed around a specified target at a user selected distance. These include Zig-Zag, Orbit, Figure 8, or a Spiral maneuver. The Fish Hunter feature can also be used for Man Overboard (MOB). Integrate your helm with NavPilot's FishHunter mode FishHunter mode is a unique feature of FURUNO’s NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB). Furuno Fantum Feedback With Fantum Feedback, NAVpilot outboard/sterndrive installations no longer require use of a physical rudder feedback unit. NAVpilot software clears the path to a simplified installation, while also delivering enhanced steering control. In the Box: FAP-3011- Control Unit GC-001 - Gesture Controller FAP3012 - Processor Unit PG700 - Heading Sensor Unit PUMPOCT10-12 - 1,000CC/MIN OCTOPUS PUMP, 12V, 1.0 Cubic Inches per second (For Ram sizes from 7-12 Cubic Inches in volume) AIR-335-792 - NMEA2000 Micro Terminator, Female AIR-335-791 - NMEA2000 Micro Terminator, Male AIR-052-531 - NMEA2000 T-Connector, Female/Female/Male (x3) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Pump-3 MK2 Reversible Hydraulic Pump for SteadySteer Features: 12V DC: Reversible hydraulic gear pump 1.6L (98 cu.in) / min. For cylinder displacement of 160-550 cc (9.8 - 33.5 cu.in) O-Ring Boss (ORB) connections. Includes 3 x ORB-5 to 9/16 UNF fittings SteadySteer compatible. (NAC-3 / AC42 required)

Pump-4 MK2 Reversible Hydraulic Pump for SteadySteer Features: 12V DC: Reversible hydraulic gear pump. 3.0L (183 cui) / min For cylinder displacement of 290 - 960 cc (17.7 - 58.5 cu. in.) O-Ring Boss (ORB) connections. Includes 3 x ORB-5 to 9/16 UNF fittings SteadySteer compatible. (NAC-3 / AC42 required).

Pump-2 MK2 Reversible Hydraulic Pump for SteadySteer Features: For cylinder displacement of 80 cc - 250 cc (4.9 - 15.2 cu. in) O-Ring Boss (ORB) connections. Includes 3 x ORB-5 to 9/16 UNF fittings SteadySteer compatible. (NAC-2 / AC12 required)

NAC-1 Precision Hydraulic Autopilot Pack Features: Easy to install system pack, hydraulic connectors, and hoses all included Dash-mount button for one-touch Auto/Standby activation Steer to Heading, Course or Route Automatic Turn Patters NAC-1 Plug & Socket connectors reduce the installation time High efficiency, super-quiet 0.8L hydraulic gear pump In the Box: Precision-9 Compass - 000-12607-001 NAC-1 Autopilot Computer - 000-11769-001 PUMP-1 MKII – 0.8L reversible hydraulic pump - 000-11770-002 Hydraulic fitting kit 000-15942-001 Standby-Auto button - 000-13703-001 Micro-C Network Components:  N2KEXT-2RD,CABLE,MICRO-C, 0,6M - 000-0119-88 N2KEXT-6RD,CABLE,MICRO-C, 1,8M - 000-0127-53 N2KEXT-15RD,CABLE,MICRO-C, 4,5M - 000-0119-86 TR-120-KIT - 000-0127-52 MICRO-C POWER CABLE ONLY - NO T CONN - 000-12202-001  N2K,MICRO-C,4-WAY BLOCK (22AWG)  - 000-12612-001

Groco Gpb-1-12V Gear Pump, Oil Chg 12V  Groco- Gear Pump Bronze 3.0GPM 50psi Max 12VDC 3/8”NPT Ports