|
Type T - Straight shaft tilt version for mounting behind the dash with a steering wheel tilt facility
This drive unit replaces a manual Tilt drive and is mounted directly behind the dash, but still allows the angle of the steering wheel to be changed. It uses the front end from Teleflex SH91800 (not supplied).
The Tilt drive allows the steering wheel angle to be adjusted in relationship to the dash. The drive requires the Tilt Mechanism.
|
1052.16 |
|
|
Type S - Standard Straight Shaft f/Mounting Behind the Dash
The Straight shaft drive unit replaces the manual drive used on cable steered boats and is mounted directly behind the dash. The drive is directly compatible with the Morse 290 steering helm but comes with its own bezel kit and can be retrofitted in most installations using the cable and steering wheel from the manual steering helm on the boat.
This drive can be mounted in 2 ways, either at 90° to the dashboard or at 20° to the dashboard. Spacer Kits are also available to reduce the space required behind the dashboard.
Retro Fits to Most Cable Steered Vessel
Easily Adaptable to S1 Autopilots
The Only Viable Option When Adding an Autopilot to a Cable Steered Vessel
Affordable, Reliable, Seamless-behind the Dash Installation
2 Year Limited Warranty
|
946.84 |
|
|
Micropump GC-M25.PVS.F Pump Head F Mount
Micropump 81378 GC-M25.PVS.F Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81378 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS.
Pump Series: GC Series
Ports/Fittings: 3/8-18 (F) NPT Side Port
Min Speed (RPM): 500
Max Speed (RPM): 4000
Max Pressure (psi): 1500
Min Temperature (°C): -29
Max Temperature (°C): 176.666666666667
Max Diff. Pressure (psi): 75
Displacement (ml/rev): 1.82
Design: Standard Design
Gear Set: 0.750/2/20 (1.82 ml/rev)
Gear Material: PPS (carbon fiber/ptfe)
Static Seals: Viton®
Base Materials: 316SS
Drive Mount: MP Housing (220 Style)
Bypass: No
Driven: Ferrite
Driving Magnet: Not Included
High System Pressure: No
Bushings: PPS
Shafts: 316SS
Gear Trim: None
Model: GC-M25.PVS.F
|
2392.47 |
|
|
Micropump GC-M35.PVS.F Pump Head F Mount
Micropump 81379 GC-M35.PVS.F Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81379 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS.
|
2271.35 |
|
|
Type T for Helms with Tilt Function for Cable Steered Boats with Dash Mounted Wheel
Features:
Replaces existing helm
Electronic clutch disengages for manual steering
Rotary drive system
Fits behind dash
Safety override technology
Current 1.25A Typical, 5A Peak
Wireless control module plus handheld pendant - steering in the palm of your hand
Steer, fish and cruise from anywhere on the boat
Easy DIY installation - no need for professional installer
2 Year limited warranty - purchase with confidence
Specifications:
Wireless Controller & Receiver
Meets FCC standards
Additional Handheld and receiver can be paired in field
Pendant and receiver auto-off in 30 minutes if no usage
Over 1 Million control codes provide enhanced security
Handheld Pendant
Water proof
Supplied with 2xAAA batteries
Includes lanyard
Wireless Receiver & Motor Controller
Waterproof
Motor drive capability up to 25A
Overload protection
Reverse polarity protection
12V DC nominal (9V min - 16V max operating range)
Offers pass-through capability for Autopilot motor and clutch control circuits
|
998.05 |
|
|
Spacer Kit for Type T System - 0.51"
Features:
13mm (0.51")
Spacer Kit
Use with 90° bezel
Specifically for Type T System
|
84.26 |
|
|
Micropump DN518F 115/230V Motor F Mount
|
5044.08 |
|
|
SP-120 Color System with Rudder Feedback & Type "T" Mechanical Dash Drive
Features:
The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control
Does not require a separate junction box, everything simply connects to the rear of the control head
This Autopilot is ideal for small vessels under 38'
The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels
SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously
Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display
Extremely easy to select your desired headings, operate, and setup, with new user friendly software
High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response
Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to
enhance performance
NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes
NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay
Autopilot Steering Modes:
Manual (Power Steer)
Auto (Pilot maintains selected Magnetic course)
GPS (Steers to Waypoint or Routes when Interfaced with GPS)
Wind (Steers to wind when interfaced to wind sensor for Sailboat installations)
Protected by 2 Year SI-TEX Warranty
Specifications:
Waterproof: IPX6
Control Head Dimensions: 110 mm L x 110 mm W
Voltage supply VOLTAGE: 12/24 Volts DC
LCD Color LCD Display
Constant Compass Heading Indicator and Rudder Angle Indicator
Current consumption: 0.5 amps at 12VDC in standby mode
Maximum Drive Output Current 15 Amps
Operating temperature: -10ºC to +55ºC
Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output
Course Detection <1 Degree
Package Includes:
SI-TEX SP-120C Color LCD Autopilot Control Head
NMEA Interface Cables
9 Axis Electronic Rate Gyro Compass
Control Head Sun cover
Product manual
Mounting Screws
|
3058.20 |
|
|
SP-120 System with Rudder Feedback & Type "T" Mechanical Dash Drive
The SP-120 autopilot control system comprises the following units:
SP-120 display and control head
SI-TEX 9 Axis rate compass
Rudder Feedback Unit (SP-120R only)
In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.
A rudder actuator system comprises one of the following:
Hydraulic system with helm pump and ram
Mechanical steering system
The autopilot should be connected to one of the following:
Reversing motor/pump set connected into the existing hydraulic steering system
Reversing mechanical drive unit connected to the existing steering mechanism
Electronic Hydraulic Solenoid Valves
|
2897.20 |
|
|
Fourtech 6' Black Mach Rotary Steering System with Helm, Bezel & Cable
Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation.
Kit Includes:
T91 Helm
X34 - 90° bezel
M90 Steering Cable - 6'
|
200.24 |
|
|
Fourtech 7' Black Mach Rotary Steering System with Helm, Bezel & Cable
Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation.
Kit Includes:
T91 Helm
X34 - 90° bezel
M90 Steering Cable - 7'
|
200.24 |
|
|
Fourtech 8' Black Mach Rotary Steering System with Helm, Bezel & Cable
Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation.
Kit Includes:
T91 Helm
X34 - 90° bezel
M90 Steering Cable - 8'
|
200.24 |
|
|
Fourtech 9' Black Mach Rotary Steering System with Helm, Bezel & Cable
Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation.
Kit Includes:
T91 Helm
X34 - 90° bezel
M90 Steering Cable - 9'
|
200.24 |
|
|
Fourtech 10' Black Mach Rotary Steering System with Helm, Bezel & Cable
Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation.
Kit Includes:
T91 Helm
X34 - 90° bezel
M90 Steering Cable - 10'
|
200.24 |
|
|
Fourtech 11' Black Mach Rotary Steering System with Helm, Bezel & Cable
Fourtech offers performance, flexibility, and durability increased by top-quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop-in" replacement for the competing systems; requiring no new holes for installation.
Kit Includes:
T91 Helm
X34 - 90° bezel
M90 Steering Cable - 11'
|
200.24 |
|