Explore E2 Wide Beam - Ultra White The E2 is our latest addition to the Explore range, giving customers a compact smaller XFM light for tight installation spaces, but with all the build quality and premium features of the larger lights in the range. Choice of Beam With the E2, you can choose either the signature Explore Series wide-angle beam (90° x 20° Elliptical), or a new narrow “laser” beam shape (20° Circular), depending on your desired effect. Advanced Water Ingress Protection The Explore E2 benefits from full IP69k Certification, the highest possible rating. Also, the rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. XFM Removal The Explore E2 has the same XFM capabilities as the larger lights in the range, being able to remove the light body for maintenance or upgrades, without the need to haul the boat. Control your Explore E2 lights Control your Explore E2 lights via the 3rd party switch or push button of your choice. Features: Elliptical 90° / 20° Wide Beam Option Circular 20° Beam Option Up to 3000 Fixture Lumens Compact design and built-in driver. Ultra-low profile outer bezel. IP69k Certification + In-hull Temporary Submersion Protection Specifications: Fixture Lumens* (total light output from a finished fixture): 3000 Beam angle (Wide): 90° / 20 ° Elliptical Beam angle (Narrow): 20° Circular IP Rating: IP69k Minimum-Maximum operating voltage DC: 10-30V DC Current / Amp draw (DC): 3.5A@12V DC / 1.5A@24V DC Driver type: Internal Correlated Color Temp: 6500k (White) Rear Temporary Submersion Protection: Yes Fish Strobe: Yes Anti-fouling properties: Tritonium coated lens LED Manufacturer: CREE Mounting Recommendations: Boat size: Up to 20m (65’) Transom / Hull spacing: 1 - 1.5m (3-5’) Installation depth below waterline: 25-30cm (10-12”) Maximum Hull Thickness: 60mm (2.4”) Physical: Total weight: 0.8kg (1.76lbs) Total Diameter (Including Bezel): 80mm (3.15”) Diameter Of Body: 59mm (2.32”) Profile Of Fixture: 3.5mm (0.14”) Overall Length: 101.5mm (4”) Minimum Space Required Inside The Hull: 172mm (6.78”) Hole Cut-Out: 60mm (2.37”) Material (Mounting Tube / Bezel): AB2 Aluminium Bronze Material (Light Body): AB2 Lens: Glass Optics (Wide Beam Option): Hybrid Collimated Optics (Narrow Beam Option): Collimated CE Approved: Yes

Explore E2 Narrow Beam - Ultra White The E2 is our latest addition to the Explore range, giving customers a compact smaller XFM light for tight installation spaces, but with all the build quality and premium features of the larger lights in the range. Choice of Beam With the E2, you can choose either the signature Explore Series wide-angle beam (90° x 20° Elliptical), or a new narrow “laser” beam shape (20° Circular), depending on your desired effect. Advanced Water Ingress Protection The Explore E2 benefits from full IP69k Certification, the highest possible rating. Also, the rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. XFM Removal The Explore E2 has the same XFM capabilities as the larger lights in the range, being able to remove the light body for maintenance or upgrades, without the need to haul the boat. Control your Explore E2 lights Control your Explore E2 lights via the 3rd party switch or push button of your choice. Features: Elliptical 90° / 20° Wide Beam Option Circular 20° Beam Option Up to 3000 Fixture Lumens Compact design and built-in driver. Ultra-low profile outer bezel. IP69k Certification + In-hull Temporary Submersion Protection Specifications: Fixture Lumens* (total light output from a finished fixture): 3000 Beam angle (Wide): 90° / 20 ° Elliptical Beam angle (Narrow): 20° Circular IP Rating: IP69k Minimum-Maximum operating voltage DC: 10-30V DC Current / Amp draw (DC): 3.5A@12V DC / 1.5A@24V DC Driver type: Internal Correlated Color Temp: 6500k (White) Rear Temporary Submersion Protection: Yes Fish Strobe: Yes Anti-fouling properties: Tritonium coated lens LED Manufacturer: CREE Mounting Recommendations: Boat size: Up to 20m (65’) Transom / Hull spacing: 1 - 1.5m (3-5’) Installation depth below waterline: 25-30cm (10-12”) Maximum Hull Thickness: 60mm (2.4”) Physical: Total weight: 0.8kg (1.76lbs) Total Diameter (Including Bezel): 80mm (3.15”) Diameter Of Body: 59mm (2.32”) Profile Of Fixture: 3.5mm (0.14”) Overall Length: 101.5mm (4”) Minimum Space Required Inside The Hull: 172mm (6.78”) Hole Cut-Out: 60mm (2.37”) Material (Mounting Tube / Bezel): AB2 Aluminium Bronze Material (Light Body): AB2 Lens: Glass Optics (Wide Beam Option): Hybrid Collimated Optics (Narrow Beam Option): Collimated CE Approved: Yes

Explore E2 Wide Beam - Midnight Blue The E2 is our latest addition to the Explore range, giving customers a compact smaller XFM light for tight installation spaces, but with all the build quality and premium features of the larger lights in the range. Choice of Beam With the E2, you can choose either the signature Explore Series wide-angle beam (90° x 20° Elliptical), or a new narrow “laser” beam shape (20° Circular), depending on your desired effect. Advanced Water Ingress Protection The Explore E2 benefits from full IP69k Certification, the highest possible rating. Also, the rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. XFM Removal The Explore E2 has the same XFM capabilities as the larger lights in the range, being able to remove the light body for maintenance or upgrades, without the need to haul the boat. Control your Explore E2 lights Control your Explore E2 lights via the 3rd party switch or push button of your choice. Features: Elliptical 90° / 20° Wide Beam Option Circular 20° Beam Option Up to 3000 Fixture Lumens Compact design and built-in driver. Ultra-low profile outer bezel. IP69k Certification + In-hull Temporary Submersion Protection Specifications: Fixture Lumens* (total light output from a finished fixture): 3000 Beam angle (Wide): 90° / 20 ° Elliptical Beam angle (Narrow): 20° Circular IP Rating: IP69k Minimum-Maximum operating voltage DC: 10-30V DC Current / Amp draw (DC): 3.5A@12V DC / 1.5A@24V DC Driver type: Internal Correlated Color Temp: 6500k (White) Rear Temporary Submersion Protection: Yes Fish Strobe: Yes Anti-fouling properties: Tritonium coated lens LED Manufacturer: CREE Mounting Recommendations: Boat size: Up to 20m (65’) Transom / Hull spacing: 1 - 1.5m (3-5’) Installation depth below waterline: 25-30cm (10-12”) Maximum Hull Thickness: 60mm (2.4”) Physical: Total weight: 0.8kg (1.76lbs) Total Diameter (Including Bezel): 80mm (3.15”) Diameter Of Body: 59mm (2.32”) Profile Of Fixture: 3.5mm (0.14”) Overall Length: 101.5mm (4”) Minimum Space Required Inside The Hull: 172mm (6.78”) Hole Cut-Out: 60mm (2.37”) Material (Mounting Tube / Bezel): AB2 Aluminium Bronze Material (Light Body): AB2 Lens: Glass Optics (Wide Beam Option): Hybrid Collimated Optics (Narrow Beam Option): Collimated CE Approved: Yes

Explore E2 Narrow Beam - Midnight Blue The E2 is our latest addition to the Explore range, giving customers a compact smaller XFM light for tight installation spaces, but with all the build quality and premium features of the larger lights in the range. Choice of Beam With the E2, you can choose either the signature Explore Series wide-angle beam (90° x 20° Elliptical), or a new narrow “laser” beam shape (20° Circular), depending on your desired effect. Advanced Water Ingress Protection The Explore E2 benefits from full IP69k Certification, the highest possible rating. Also, the rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. XFM Removal The Explore E2 has the same XFM capabilities as the larger lights in the range, being able to remove the light body for maintenance or upgrades, without the need to haul the boat. Control your Explore E2 lights Control your Explore E2 lights via the 3rd party switch or push button of your choice. Features: Elliptical 90° / 20° Wide Beam Option Circular 20° Beam Option Up to 3000 Fixture Lumens Compact design and built-in driver. Ultra-low profile outer bezel. IP69k Certification + In-hull Temporary Submersion Protection Specifications: Fixture Lumens* (total light output from a finished fixture): 3000 Beam angle (Wide): 90° / 20 ° Elliptical Beam angle (Narrow): 20° Circular IP Rating: IP69k Minimum-Maximum operating voltage DC: 10-30V DC Current / Amp draw (DC): 3.5A@12V DC / 1.5A@24V DC Driver type: Internal Correlated Color Temp: 6500k (White) Rear Temporary Submersion Protection: Yes Fish Strobe: Yes Anti-fouling properties: Tritonium coated lens LED Manufacturer: CREE Mounting Recommendations: Boat size: Up to 20m (65’) Transom / Hull spacing: 1 - 1.5m (3-5’) Installation depth below waterline: 25-30cm (10-12”) Maximum Hull Thickness: 60mm (2.4”) Physical: Total weight: 0.8kg (1.76lbs) Total Diameter (Including Bezel): 80mm (3.15”) Diameter Of Body: 59mm (2.32”) Profile Of Fixture: 3.5mm (0.14”) Overall Length: 101.5mm (4”) Minimum Space Required Inside The Hull: 172mm (6.78”) Hole Cut-Out: 60mm (2.37”) Material (Mounting Tube / Bezel): AB2 Aluminium Bronze Material (Light Body): AB2 Lens: Glass Optics (Wide Beam Option): Hybrid Collimated Optics (Narrow Beam Option): Collimated CE Approved: Yes

Explore E6 Thru Hull - Blue & White The Explore E6 TH is the perfect choice for transoms that require a thru-hull-style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design. The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition. The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht. IP69k Protection & Temporary Rear Submersion Protection As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k. IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Superior Protection. Total Peace of Mind. Features  90-degree top beam 20-degree side beam Up to 11,000 fixture lumens (ultra white) Rectangular beam Compact design and small external driver Control by switch or DMX control Specifications: Warranty: 3 years

Explore E6 XFM Underwater Light - Ultra White/Midnight Blue OceanLED Explore E6 is the best underwater light available. The incredible light output will stun you and your friends and will make your boat truly stand out. The Explore E6 has the most advanced optics available on the market. These optics are designed exclusively by OceanLED and offer a truly striking 90° surface beam angle with a focused 20° side beam produces a blade of light under the water that penetrates further, illuminating a larger area without any loss. There are other lights in the market that claim to be bright, but if you don’t focus that power, you don’t achieve great results and that’s what sets OceanLED apart from the rest. The Explore E6 is a technologically advanced, super-efficient light. The mix of optics, electronics, form factor and built in driver work together to make the most advanced underwater light series available in the market. The Explore E6 packs an incredible 11,000 fixture lumens into a low profile, Xchangeable Flush Mount body, meaning the light cartridge can be removed from inside the hull should maintenance be required. The compact size and built in driver mean less space is required inside the vessel, allowing installation in tight areas and the designed clamping ring makes installation quicker and easier. The advanced PCB design used in the Explore E6 results in a dual Midnight Blue, and Ultra white LED light without a reduction in single color fixture lumens, ensuring the light output is as bright as possible. The Explore E6 is also available in an RGBW version, controlled by either a toggle switch or DMX. Choose from a limitless color palette to best suit the yachts ambience and maximize the lighting effect in varying water conditions or enhance a party theme/atmosphere or merely change the color for fun. Looking to catch more fish? Switch on the Fish-Strobe mode, and the light emits a random strobe pattern that is proven to attract extra baitfish and help catch more fish. The Explore E6 can be fitted in hull, facing downwards, as the ultimate way to attract sportfish in the powerful strobing mode. Maintenance is virtually zero. Just wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 11,000 Fixture Lumens Best-in-class performance from this ultra-bright light makes it the obvious choice for those who want to be seen 90°/20° Beam Angle A true wide-angled, focused beam produces a blade of light under the water that penetrates further Compact Design Less room required inside the vessel Internal Driver Quicker to install Plug and Play Deutsch connectors make installation simpler 240V AC Option (100V - 240V AC 50/60Hz) Upgrade path from Allure Series Same hole sizes as Allure 150 / 250  Easy to clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours of scraping each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more Specifications: Warranty: 3 years

Explore E3 XFM Ultra Underwater Light - Ultra White Technologically advanced & super efficient. Explore is the ultimate choice of underwater light series. The Explore E3 has the most advanced optics available on the market. These optics are designed exclusively by OceanLED and offer a truly striking 90° surface beam angle with a focused 20° side beam producing a blade of light under the water that penetrates further, illuminating a larger area with minimal loss. The ultra low profile outer face of the housing is designed for vessels wanting to go fast and have no impact on speed or flow of water over the hull, perfect for the sides or running surfaces. Features: Superior light distribution due to advanced, generation optics Available in single, dual or full RGBW color scroll models In built driver for easy installation 90° top beam - A true wide-angled, focused beam lights up a large area of water, flooding it with light 20° side beam - A true wide-angled, focused beam lights up a large area of water, flooding it with light Rectangular beam 5,000 Fixture Lumens - Best-in-class performance from this ultrabright light makes it the obvious choice for those who want to stand out from the crowd Compact Design - The compact size and built in driver mean less space is required inside the vessel, allowing installation in tight areas Reduced Installation Time - All aspects of this design make installation quicker and simpler Simple Toggle Control - Changing to Fish-Strobe or selecting a color on the RGBW model is a simple toggle of the power switch Fish-Strobe Mode - Exceptionally bright, randomized strobing of the light is proven to attract more bait and catch more fish Same Light Output as Sport Series - E3 can be mixed with Sport series lights Sport can be used on transom and E3 along the sides where flush mount is preferred Specifications: Warranty: 3 years

Explore E3 XFM Ultra Underwater Light - Ultra White/Midnight Blue Technologically advanced & super efficient. Explore is the ultimate choice of underwater light series. The Explore E3 has the most advanced optics available on the market. These optics are designed exclusively by OceanLED and offer a truly striking 90° surface beam angle with a focused 20° side beam producing a blade of light under the water that penetrates further, illuminating a larger area with minimal loss. The ultra low profile outer face of the housing is designed for vessels wanting to go fast and have no impact on speed or flow of water over the hull, perfect for the sides or running surfaces. Features: Superior light distribution due to advanced, generation optics Available in single, dual or full RGBW color scroll models In built driver for easy installation 90° top beam - A true wide-angled, focused beam lights up a large area of water, flooding it with light 20° side beam - A true wide-angled, focused beam lights up a large area of water, flooding it with light Rectangular beam 5,000 Fixture Lumens - Best-in-class performance from this ultrabright light makes it the obvious choice for those who want to stand out from the crowd Compact Design - The compact size and built in driver mean less space is required inside the vessel, allowing installation in tight areas Reduced Installation Time - All aspects of this design make installation quicker and simpler Simple Toggle Control - Changing to Fish-Strobe or selecting a color on the RGBW model is a simple toggle of the power switch Fish-Strobe Mode - Exceptionally bright, randomized strobing of the light is proven to attract more bait and catch more fish Same Light Output as Sport Series - E3 can be mixed with Sport series lights Sport can be used on transom and E3 along the sides where flush mount is preferred Specifications: Warranty: 3 years

Explore E6 XFM Underwater Light - Color Scroll OceanLED Explore E6 is the best underwater light available. The incredible light output will stun you and your friends and will make your boat truly stand out. The Explore E6 has the most advanced optics available on the market. These optics are designed exclusively by OceanLED and offer a truly striking 90° surface beam angle with a focused 20° side beam produces a blade of light under the water that penetrates further, illuminating a larger area without any loss. There are other lights in the market that claim to be bright, but if you don’t focus that power, you don’t achieve great results and that’s what sets OceanLED apart from the rest. The Explore E6 is a technologically advanced, super-efficient light. The mix of optics, electronics, form factor and built in driver work together to make the most advanced underwater light series available in the market. The Explore E6 packs an incredible 11,000 fixture lumens into a low profile, Xchangeable Flush Mount body, meaning the light cartridge can be removed from inside the hull should maintenance be required. The compact size and built in driver mean less space is required inside the vessel, allowing installation in tight areas and the designed clamping ring makes installation quicker and easier. The advanced PCB design used in the Explore E6 results in a dual Midnight Blue, and Ultra white LED light without a reduction in single color fixture lumens, ensuring the light output is as bright as possible. The Explore E6 is also available in an RGBW version, controlled by either a toggle switch or DMX. Choose from a limitless color palette to best suit the yachts ambience and maximize the lighting effect in varying water conditions or enhance a party theme/atmosphere or merely change the color for fun. Looking to catch more fish? Switch on the Fish-Strobe mode, and the light emits a random strobe pattern that is proven to attract extra baitfish and help catch more fish. The Explore E6 can be fitted in hull, facing downwards, as the ultimate way to attract sportfish in the powerful strobing mode. Maintenance is virtually zero. Just wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 11,000 Fixture Lumens Best-in-class performance from this ultra-bright light makes it the obvious choice for those who want to be seen 90°/20° Beam Angle A true wide-angled, focused beam produces a blade of light under the water that penetrates further Compact Design Less room required inside the vessel Internal Driver Quicker to install Plug and Play Deutsch connectors make installation simpler 240V AC Option (100V - 240V AC 50/60Hz) Upgrade path from Allure Series Same hole sizes as Allure 150 / 250  Easy to clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours of scraping each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more Specifications: Warranty: 3 years

Explore E7 Thru Hull - 10 Degree Angle - Blue & White The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design. The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition. The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht. The new Explore E7 TH has patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.  IP69k Protection & Temporary Rear Submersion Protection As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k. IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Superior Protection. Total Peace of Mind. Features: 10-degree angle for angled hulls 90-degree top beam 20-degree side beam Up to 11,000 fixture lumens (ultra white) Rectangular beam Compact design and small external driver Control by switch or DMX control

Explore E7 Thru Hull - 20 Degree Angle - Blue & White The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design. The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition. The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht. The new Explore E7 TH has patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.  IP69k Protection & Temporary Rear Submersion Protection As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k. IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Superior Protection. Total Peace of Mind. Features: 20-degree angle for angled hulls 90-degree top beam 20-degree side beam Up to 11,000 fixture lumens (ultra white) Rectangular beam Compact design and small external driver Control by switch or DMX control

Explore E7 Thru Hull - 30 Degree Angle - Blue & White The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design. The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition. The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht. The new Explore E7 TH has a patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.  IP69k Protection & Temporary Rear Submersion Protection As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k. IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Superior Protection. Total Peace of Mind. Features: 30-degree angle for angled hulls 90-degree top beam 20-degree side beam Up to 11,000 fixture lumens (ultra white) Rectangular beam Compact design and small external driver Control by switch or DMX control

Sport S3166s Underwater LED Light - Ultra White OceanLED Sport S3116s has been designed and built for those who want to stand out. Whether cruising in the Mediterranean or fishing in The Keys, the S3116s gives dazzling performance allowing you to enjoy more time on the water. The S3116s has the most advanced optics available on the market. These optics are designed exclusively by OceanLED and offer a truly striking 90° surface beam angle with a focused 20° side beam angle providing greater water penetration, illuminating a larger area without any loss. There are other lights in the market that claim to be bright, but if you dont focus that power, you don't achieve great results and thats what sets OceanLED apart from the rest. The S3116s packs a powerful 9,840 Lumens into a small body, and when you combine that with the advanced optics, the results are truly remarkable. At least 20% brighter than our competitors and with a true 90° beam angle with no fade at the edges, the S3116s is clearly best-in-class. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The compact, simple design is easy to install even for the weekend DIYer. A small 12mm hole is all that's needed to run the cable through the hull. Fix 3 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 9,840 Lumens / 5,000 Fixture Lumens: Best-in-class performance from this ultra-bright light makes it the obvious choice for those who want to stand out from the crowd 90° / 20° Beam Angle: A true wide-angled, focused beam lights up a large area of the water Compact and simple design: Made from corrosion free Alu Bronze, there is a lot packed into this 10cm light. Installation needs only a small, 12mm hole in the hull to feed the cable through and 3 screws in place. No bonding required Easy to clean: Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours of scrubbing each time you use it Fish-Strobe Mode: Exceptionally bright, randomised strobing of the light is proven to attract more fish and catch more bait Specifications: Boat size: Up to 65' (20M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Installation depth (to top of fixture): 8-10" (20-25cm) Light output equivalent to: 150W Metal Halide Lumens: 9840 Fixture Lumens: 5000 Typical LED life expectancy: 40,000+ Hours Minimum-Maximum operating voltage DC: 9-32V DC Current / Amp draw (DC): 12V DC 5A / 24V DC 2.4A Approx. light penetration (avg. water quality): TBC Approx. Light penetration (perfect water quality): TBC Driver type: Internal Total weight: 0.70kg Extension cable length (standard): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: AB2 Aluminium Bronze Specifications: Warranty: 2 years 

Discover Series D3 Underwater Light - Ultra White The Discover Series D3 underwater LED light from OceanLED, is ideal for boats that want to discover the many benefits of underwater lighting. Superior Protection, Total Peace of Mind The Discover D3 is rated at IP69k, the highest achievable rating of protection against water ingress. IP69k goes one step further than the industry standard IP68, giving you additional protection and peace of mind. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern.  Compact Design The D3’s compact dimensions make it ideal for tight-fitting areas or smaller boats. Advanced Signature Optics - Wide Surface Beam The Discover D3 benefits from OceanLED’s signature optics (90° x 20°), producing an unrivaled optimal lighting effect. Advanced Signature Optics - Narrow side Beam The OceanLED signature optics produce a narrow side beam, that has a minimal light loss, focusing the beam where you need it and penetrating further through the water. Control your lights   Control your Discover D3 lights via the 3rd party switch or push button of your choice. Consult the installation manual for more information. Features: 700 Fixture lumens 90° Top Beam  Elliptical Beam Shape  20° Side Beam  IP69k Protection Compact size for tight spaces and smaller boats Rear Submersion Protection Can be used above water

Discover Series D3 Underwater Light - Ultra White with Isolation Kit The Discover Series D3 underwater LED light from OceanLED, is ideal for boats that want to discover the many benefits of underwater lighting. Superior Protection, Total Peace of Mind The Discover D3 is rated at IP69k, the highest achievable rating of protection against water ingress. IP69k goes one step further than the industry standard IP68, giving you additional protection and peace of mind. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern.  Compact Design The D3’s compact dimensions make it ideal for tight-fitting areas or smaller boats. Advanced Signature Optics - Wide Surface Beam The Discover D3 benefits from OceanLED’s signature optics (90° x 20°), producing an unrivaled optimal lighting effect. Advanced Signature Optics - Narrow side Beam The OceanLED signature optics produce a narrow side beam, that has a minimal light loss, focusing the beam where you need it and penetrating further through the water. Control your lights   Control your Discover D3 lights via the 3rd party switch or push button of your choice. Consult the installation manual for more information. Features: 700 Fixture lumens 90° Top Beam  Elliptical Beam Shape  20° Side Beam  IP69k Protection Compact size for tight spaces and smaller boats Rear Submersion Protection Can be used above water