EZ Board Boarding Handle - 36" Removable boat boarding assist handle. Converts standard fishing rod holder for use as a boarding assist handle. Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock. Features: Assist in maintaining balance while boarding Slides easily into and out of most flush mounted rod holders No special tools needed Made from high impact corrosion and UV resistant PVC Five (5) Year Replacement Warranty Made in the USA Installation and Removal Instructions: Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance. Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove. Do not force the EZ Board handle to install or remove. NOTE: Please be advised that it is up to the customer to drill the holes so that they can orient the handle how they would like to. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder.

EZ Board Boarding Handle - 48" Removable boat boarding assist handle. Converts standard fishing rod holder for use as a boarding assist handle.Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock. Features: Assist in maintaining balance while boarding Slides easily into and out of most flush mounted rod holders No special tools needed Made from high impact corrosion and UV resistant PVC Five (5) Year Replacement Warranty Made in the USA Installation and Removal Instructions: Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove Do not force the EZ Board handle to install or remove NOTE: Please be advised that it is up to the customer to drill the holes so that they can orient the handle how they would like to. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder.

EZ Cleat Auxiliary Tie Down - 22" Features: EZ Cleat 22" Auxiliary Tie Down Weight: 1.5lb.

8' Maui Youth Inflatable Stand-Up Paddleboard The Maui is an all-around recreation iSUP intended for kids and smaller paddlers. Measuring 8’ x 29” x 5”, the Maui iSUP is a very manageable board to handle for smaller paddlers. It is a super lightweight board, easy to carry, roll up, store away, and bring on every adventure. We believe it’s never too early to learn how to paddle. The Maui iSUP was created for young thrill-seekers that are ready to get out and explore the water early. The board’s wide, yet compact design creates an all-around stable ride for small paddlers of all levels. Sporting a pinstriped non-slip EVA traction pad, the Maui is specifically designed to get youth paddlers comfortable with the sport and to enjoy the adventure of paddling in no time.  EVA non-skid traction pad - The EVA non-Skid traction deck pad material allows for extra comfort while standing. In addition to the non-skid material, it's diamond-grooved texture creates increased grip while paddling.   Double-layer PVC material - The exterior construction is double-layered, 1000 Denier, 3-Ply PVC material. This premium grade material is highly durable, UV resistant & puncture resistant, and tough enough to withstand marine environments.  Drop-stitch core - Drop-Stitch Technology is constructed of thousands of polyester threads that connect the top and bottom PVC layers together. This allows for high-pressure inflation, creating that flat, board-like shape with a solid feel as you paddle.  Fabric-reinforced PVC rail - The rails of our inflatable SUPs are double-layered to ensure seam durability and toughness. This reinforced exterior layer is designed to absorb impact and protect the iSUP so you can confidently take your board anywhere.  Features: Bungee system to store your PFD-life vests, dry bags, coolers, and other gear Non-slip tract pad designed with ultra-cushioned, non-slip traction pad material Double reinforced, UV-resistant D-ring attachment point for leash Universal bow mount to attach Go-Pros, speakers, cameras, cup holders, etc. Double pad-eye for anchoring, docking, and securing Reinforced soft neoprene comfort grip handle Halkey-Roberts (HR) valve for inflating and deflating with push-pin function and screw cap Technical Specifications: Recommended pressure - 15 PSI Backpack dimensions - 30" x 12" x 8" Weight - 13 lbs In the Box: SUP Backpack Adjustable paddle Ankle leash Removable skeg Pump with gauge Repair kit

RAM EZ-ON/OFF™ Bicycle Mount for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stc Mount your Garmin GPSMAP quickly and easily with a RAM EZ-ON/OFF handlebar base. Designed to fit most common handlebar sizes, this compact and durable mount is ideally suited to the open road or trails. Uses common zip ties to attach to a variety of handlebar diameters. Made of high strength composite, it is light weight too. Adjustable to allow for the best viewing angle, this product is perfect for any cyclist and their compact electronic device. Mount includes 12 degree tappered shaft for tapered handlebars. This mount is designed to hold the following devices: Garmin Astro 320 Garmin GPSMAP 62 Garmin GPSMAP 62s Garmin GSPAMP 62sc Garmin GPSMAP 62st Garmin GPSMAP 62STC Material: High Strength Composite

Haight Pump 10U-N Pump W/Neo Lip Sl No R/V Features Pump Body:Ductile Iron Shaft Seal:Neoprene Lip Seal  Port Size:Inlet Port is 1 inch NPT Discharge Port is 1 inch NPT GPM 10   The Haight 10U-N is a Ductile Iron Gear Pump, square flanged Pump End Only less motor, 10 GPM rated, with Ductile Iron Construction, Neoprene Lip Seal, Steel Shaft, Steel Gears, Iron Rotor and Bearings. The standard construction materials of this pump are Ductile Iron Housing, Steel Shaft and Pinion Gears, Iron Rotor and Bearings, Buna N Lip Seals and Elastomers. These gear pumps have a Gear within a gear internal design and is very effective at handling a broad range of applications while operating at standard motor speeds, and reducing wear. Both of these operating characteristics play an important role in minimizing overall capital investment, and operating expenses. Compact rugged, and easy to maintain, these pumps are ideally suited to close-coupled mounting, or direct mounting to the motor. These pumps can operate at standard motor speeds, eliminating the need for pulleys/gear reducers. The involute gear design offers excellent suction characteristics, and minimizes noise and reduces internal bypassing It comes standard with self-lubricating gramix iron bearings, and easy to maintain Buna-N lip seals. The seals are installed in the UniverSeal design for simple and quick replacement, or change to alternate seal style. This is just the bare pump end, but there are optional mounting brackets which are designed for in-line mounting with standard NEMA frame size motors or bedplate mounting. These pumps are self-priming and will develop up to 27 inches of vacuum. Pumps will operate in either direction, and flow direction in the pump can be changed without disrupting the attached piping, or special tools. The is the standard pump model and it does not come with the relief valve but if required it has the flexibility of a bolt-on, integral Relief Valve assembly (sold as an extra adder) - the relief valve assembly can be added at any time, in the field, with no special tools.   Applications Petroleum Products, Machine Manufacturing Applications Machine Tools, Hydraulic Equipment Lubrication Systems Diesel Engines Food Processing Restaurant Equipment Misc. Chemical Applications Glue and Ink Soap and Detergent Products Building and Highway Contractors Paper Products Industries Automotive Applications Shipbuilding Applications Beverage Applications Aircraft Applications Mining Applications    

SHURflo 166-200-36, Air Diaphragm Pump 0.6 GPM SHURflo Air Diaphragm Pump, 0.6 GPM (2.3 l/min), Continuous Duty, Viton Valves and Diaphragm, Polypropylene Body, 20-60psi, 3/8” Hose Barb Fittings   Item Diaphragm Pump Type Air-Driven Injection  Inlet/Outlet (In.)3/8 HB Body Material Polypropylene Diaphragm Material Viton(R) Check Valve Viton(R) Max. Temp. (F)120 Length (In.) 5.80 Width (In.)3.80 Height (In.)7.00 GPM Max .0.6 Max. Pressure (PSI) 60 Self-Priming 25" Hg

SHURflo 94-230-36, Pressure Switch Viton, 25-50 PSI for 2088 Series

BERKELEY L76-36, TANK BODY

Minor Repair Kit for Sherwood N-10360GX This kit contains the following items   SH 10077K 2 IMPELLER KIT SH 10546 1 SEAL/SEAT ASSEMBLY   Kits are put together at time of order

Minor Repair Kit for Sherwood N-10460 This kit contains the following items   SH 10512 2 GASKET SH 10514C 1 LIP SEAL SH 9959K 1 IMPELLER KIT   Kits are put together at time of order

Minor Repair Kit for Sherwood N-10470 This kit contains the following items SH 10512 2 GASKET SH 10514C 1 LIP SEAL SH 9959K 1 IMPELLER KIT    Kits are put together at time of order

Fill-Rite 901-N-1 1/2 901 Meter Nickel Plated 1.5   Fill-Rite Flow Meter 6-40GPM 1 1/2"FNPT Ports

BURKS 23921-N, WET END KIT

BURKS 23922-N, WET END KIT NORYL IMP