Long Stem ForwardScan™ Transducer w/Sleeve Plug & Fairing Block ForwardScan™ Sonar is the ideal forward looking two dimensional echo-sounder for all power and sail boats that want safety and peace of mind that comes with knowing the depth of the water ahead of the boat. Unlike other Forward-looking sounders, the ForwardScan™ can display bottom imagery up to 8 times the current depth, it integrates with your onboard NS evo2 or Zeus Touch providing full control at any operating station Provides water depth information in front of the boat to allow boaters to confidently navigate shallow or poorly charted waters Look ahead view is capable of up to 8 times the depth however the normal operating range is 4 to 5 times the depth. Ex 10' depth would provide a 80' forward view Operates at 180kHz to reduce interference from tradition 200kHz echo sounders. Transmits and receives up to ten times faster than previous forward looking systems providing a real time update. Easy Auto Ranging: Auto forward range and auto depth range default options update the range scales to best suit the viewing of the depth in front of the boat with no button pushing. The deeper the depth range the further forward range. The shallower the depth range the shorter forward range System Overview Unlike other forward looking sonar solutions this is fully integrated to the network allowing control and viewing of the ForwardScan information on multiple displays simultaneously and even via GoFree on a tablet. Network Options: Connect directly to Sonar Hub or NSS evo2. ForwardScan Sonar view available on the following displays NSS Evo2, NSO Evo2, Zeus2 Unique Selling Point Look way beyond the bow of your boat for confident navigation of shallow water or poorly charter areas Complete integration maximizes viewing and control Easy to view and operate with unique Bottom Coloring and Auto Scaling Proven installation using a standard 2" stainless thru-hull fitting which allows for a transducer plug design install and removal while boat is in water Flexible networking with direct connect to SonarHub or NSS Evo2. The following current products will require free software updates to be compatible with the ForwardScan transducer which will be available on the Simrad and B&G support website near availability of the ForwardScan transducer: NSS Evo2 Zeus 2 SonarHub.

556TID-HDD SS260 Stainless Steel Thru-Hull Transducer w/Temp and Fairing Block - 10 Pin The SS260 is our best performing, stainless-steel, thru-hull stem for 1 kW echosounders. Its construction utilizes separate 50 kHz and 200 kHz elements for unparalleled deep-water performance and unmatched bottom and water-column detail. The SS260’s narrow beam gives crisp image detail especially suited for fishing shelves, intricate bottom structures, and wrecks. Standard Features 1,000 Watts Power 50/200 kHz with Diplexer 20/6 degree Beam Angles Stainless Steel Thru-Hull with Temperature 10-Pin Connector High Speed Fairing Block included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B785M Bronze Thru-Hull Chirp Transducer with High Speed Fairing Block Features: Frequency: Chirp 80 - 130 kHz Power Rating: 600 Watts Connector: 10 Pin Fairing Block: High Speed Fairing Block Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (10-Pin) 600 Watts 50/200 kHz 40/10 degree Beam Angles Bronze Thru-Hull with Speed and Temperature 30 Foot Cable with 10-Pin Connector High-Speed Fairing Block Included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (8-Pin) 600 Watts 50/200 kHz 40/10 degree Beam Angles Bronze Thru-Hull with Speed and Temperature 30 Foot Cable with 8-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

ForwardScan® Transducer Kit with Sleeve & Plug Know what lies ahead, with ForwardScan. This forward-looking sonar provides a clear two-dimensional image of the bottom in front of your vessel, allowing you to navigate shallow or poorly-charted waters with confidence. With real-time updates and a forward-looking view of up to eight times your current depth, ForwardScan lets you relax and enjoy a safer day on the water. The ForwardScan transducer is compatible with Simrad NSS evo2 and NSO evo2 MFD systems, and can be easily installed on almost any craft. Features: Easy to use Forward-looking 2D sonar imaging Bottom Color Tracking for a simplified bottom view Heading Line View combines ForwardScan depth data into heading line on charts Shallow depth alarm Maximum forward view of 8X current depth, nominally 4-5X current depth Operates at 180kHz, reducing interference from traditional 200kHz echosounders Built-in temperature sensor 50.8mm (2") stainless steel through-hull fitting Connects directly to Simrad NSS evo2, or NSO evo2 via SonarHub sounder module

B285M Medium-Frequency CHIRP Transducer with Temperature - Bronze Thru-Hull with High Speed Fairing Block Features: Frequency: Chirp 85 - 135 kHz Power Rating: 1 KW Connector: 10 Pin Fairing Block: High Speed Fairing Block Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R109LH Urethane Chirp Thru-Hull with Temp & High Speed Fairing Block - No Connector Transducer Features: Airmar R109 Housing Style Transducer The Broadband R109 operates at any frequency between 38 kHz to 75kHz and 130 kHz to 210 kHz. Adjusting the frequency allows you to change the R109's beamwidth and depth capabilities. For example if you are bottom fishing in 61 m (200') of water, the narrow high-frequency beam will display extreme bottom detail and fish holding tight to structure. If you are tuna or marlin fishing in deep blue water, the wider, low-frequency beam will not only give deep-water bottom detail, but more importantly show you more of what is around your vessel, including bait which may attract game fish. Because the R109 has a bandwidth that covers a continuous frequency spectrum, next generation Fish Finders utilizing Furuno Free Synthesizer (FFS) technology can be made “tunable”, so fishermen can “dial-in” the best frequency for the target fish species or conditions. Standard Features: Thru-Hull Transducer with High Performance Fairing Block Kit 3kW Low Frequency, 2kW High Frequency Furuno Free Synthesizer (FFS) compatible - select any two frequencies from 38 kHz to 75kHz and 130 kHz to 210 kHz Beam angle dependent upon frequency: Low = 19 degrees to 10 degrees port-starboard (10 degrees to 5 degrees fore-aft) High = 8 degrees to 4 degrees No Connector Designed for 40ft and above boats made of fiberglass, wood or metal WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

ST60 Long Arm Masthead Transducer Raymarine's ST60 Long Arm Masthead Transducer comes with a 30m cable.

B45 Bronze Thru-Hull with Fairing Block - 50/200 kHz - 600W - 9-Pin Connector (xSonic) The B45 is Airmar’s smallest and most economical, dual-frequency, bronze, stem transducer. It features a single, 50/200 kHz ceramic element. The included fairing streamlines the transducer and increases the performance—even at higher speeds. Features The depth and fast-response water-temperature sensing 600 W of power Dual-frequency element: 50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200') 200 kHz with a 12° beamwidth for depth performance to 206 m (700') Excellent performance and sensitivity in a small housing Bronze housing with High-performance Fairing for optimal performance at speed Specifications Acoustic Window: Urethane Cable-Length: 10 m (33') Common Use: Cruising/Racing Sailboats, Leisure/Yachting, Fishing Connector: Simrad 9-Pin, Lowrance 9-Pin, Navico 9-Pin Conventional Beam: 45°/12° Country of Origin: USA Cross Reference: 000-13946-001 Deadrise Range: Up to 28° with fairing Display Connector: 9N Frequency Band: 50/200 kHz Hole Size: 22 mm (7/8") Housing Material: Bronze Hull Material: Fiberglass or wood Max Deadrise: Up to 26° with fairing Max Deadrise Angle: 26° Max Depth: Low frequency- 366 m (1200'), High frequency- 206 m (700') Max Vessel LOA: Up to 9 m (30') Mix and Match Series: 5-Pin 600 Watt Mounting Style: Thru-Hull with Fairing Power Rating: 600 W Sensor Connector: MM Single or Dual Frequency: Conventional Dual Frequency Tilted Element: No Transducer Functions: Depth, Temperature Usable Shaft Length: 92 mm (3.62") Weight: 2.5 kg (5.5 lb.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bronze Thru-hull mount, long stem transducer with fairing block. Provides depth, temperature, and speed data. Operating frequency of 200 and 50 kHz. Beamwidth of 12 degrees at 200 kHz, 45 degrees at 50 kHz. Transducer kit comes with installation instructions - follow them carefully to ensure proper operation. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rubber Coated Transducer, w/ Fairing Block, 1kW (No Plug) 1 kW 50 kHz 28 degree Beam Angle 6.6 lbs. Rubber Coated with Fairing Block 15-Meter Cable, no connector provided May be used for 75 kHz frequency setting feature, available only in FCV1100/1200 and FCV1200BB WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bronze Broadband Thru-Hull with Temp and Hi-Speed Fairing Block, 1kW (No Plug) 526TID-HDN Thru-Hull Transducer with Broadband Technology 1 kW 50/200 kHz, no Diplexer 20/6 degree Beam Angles Bronze Thru-Hull with Temperature 10 Meter Cable No connector provided Ships with High-Speed Fairing Block, # AIR-033-391 B260 MB1100 required for some applications - contact Furuno for more information WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

StructureScan 3D Thru-Hull Transducer Fairing Block Only Navico's high-performance fairing block gives you greater StructureScan performance at speed.

B45-DT-HB 600W Thru-Hull Transducer w/Fairing Block & Humminbird #9 Connector The B45 is our smallest and most economical, dual-frequency, bronze, stem transducer. Its streamlined shape and High Performance fairing block deflects aerated water from the transducer's face for strong return echoes and clear display images.  Features: Bronze housing Depth and Temperature Recommended for planing-hull powerboats and cruising sailboats up to 9 m (30’) Good sensitivity in a compact housing Fast-response water-temperature sensor provides ±0.2°C (±0.1°F) High-Performance Fairing included Usable Shaft Length: 92 mm (3.62”) Standard fairing block  Frequency: 50/200 kHz Maximum Depth Range: 50 kHz—235 m to 353 m (800’ to 1,200’) 200 kHz—118 m to 206 m (400’ to 700’) Cone: 50 kHz—45°, 200 kHz—12° RMS Power: 600 W This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.