B164 12 degree 1kW Tilted Element Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with 1kW tilted element transducers. 12 degree tilted version for 8 to 15 degree hull deadrise Compatible with Lowrance HDS Series and Simrad NSE Series Multifunction Display units. Features: Depth/Temp 50/200 kHz 1 kW RMS High-performance 7 pin Blue Connector Bronze 12 degree

B164 1kW 20° Thru-Hull Transducer with Blue Connector Step up to a 1kW - Without a Fairing!Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. Low-profile protrusion below the hull - no affect on your boats running performance The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW (1,000 Watts) RMS Power Frequency: 50/200 kHz Cone: 50 kHz - 22° x 20° / 200 kHz - 6° x 6° Maximum Depth Range: 50 kHz - 353M to 529M (1,200' to 1,800') / 200 kHz - 152M to 235M (500' to 800') Engineered for center-console and trailered boats Interfaces to any 600W or 1 kW echosounder Bronze (B164) Housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Usable Shaft Length: 71mm (2.80") Fixed 20° tilted version for 16° to 24° hull deadrise 10M Cable included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164-12 12° 1kW Tilted Element Transducer with 6-Pin Connector Features: Depth/Temp 50/200 kHz 1 kW RMS High-performance Bronze Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

DT800 12-Degree Tilt Smart Transducer The DT800 is a smart depth and temperature transducer for Raymarine instrument and chartplotter systems. Convenient SeaTalkng output allows you to plug this transducer directly into your network and receive accurate depth and water temperature data on your connected devices. Calibration of the transducer's sensors is performed from a network-connected Axiom chartplotter or i70s instrument.   Features: 12° tilted element for deadrise compensation SeaTalk network compatible 235 kHz frequency prevents interference with other onboard depth sounders or fishfinders 100-Watt output provides accurate depths of 0.5M (1.6 ft.) and 180M (600 ft.) 2-inch, high-strength plastic housing suitable for fiberglass or metal hulls Retractable housing with a water valve for easy maintenance 6M (20-foot) interconnect cable with SeaTalk NG connector

Bronze 12 degrees tilt-element thru-hull w/temp for 8 degrees to 15 degrees hull deadrise (Beam angle:45 degrees @50kHz,12 degrees @200kHz)

B164-20 20° 1kW Tilted Element Transducer with 6-Pin Connector Features: Depth/Temp 50/200 kHz 1 kW RMS High-performance Bronze Step up to a 1kW without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

B164 1kW 0° Thru-Hull Transducer with Blue Connector The B164 is a 1kW bronze low-profile transducer with a fast-response temperature sensor. The transducer is ideal for fast, trailered, tournament, sport-fishing boats that cannot install an external fairing. This version has a zero degree tilt for hull deadrise angles of 0-7 degrees. The BL (Blue Connector) version of the B164 transducer is for Lowrance fishfinders and sounders that use the standard Lowrance 7-pin blue connector. This includes the Lowrance HDS series and many other current and discontinued Lowrance units. The B164 BL version is also for the Simrad NSE series. Features: Power output 1000W 3.875" hole size (98mm) Beam 22 x 20° at 50kHz, 6 x 6° at 200kHz Maximum depth 1200-1800 ft @ 50kHz Maximum depth 500-800 ft @ 200kHz This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B60 Tilted Element™ 12° 12° titled version is designed for 8° - 15° deadrise angles The bronze B60-12° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. Features: Depth/Temp 50/200 kHz 600w RMS Mid-performance Bronze WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B60 Tilted Element™ 12° 12° titled version is designed for 8° - 15° deadrise angles For use with Raymarine DSM250/DSM300/DSM300G/DSM30/CP300 The bronze B60-12° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. Features: Depth/Temp 50/200 kHz 600w RMS Mid-performance Bronze

B175L Bronze Low Profile Thru Hull 20° Tilted Element Transducer 1kW Features Material: Bronze For use with CP450C or CP470 Chirp Sonar Module Power (RMS): 1Kw Max Depth(ft): 2,500 Frequency (khZ): 40-60 Beam Width(L/H): 32°-21° Records: Depth / Temperature Approved Hull Material: Fiberglass / Wood Cable Length (Ft/M): 33ft / 10M Supported Deadrise / Transom Angles: 16-24° Deadrise Note: Using a Single B175 or B75 requires the A80328 Single Operation Cable

B60-20 20° Tilted Element Transducer with 6-Pin The bronze B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. Features: Depth/Temp 50/200 kHz 600w RMS Mid-performance Bronze WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

PTI-WBL Ice Transducer with Blue Connector The PTI-WBL is an 83/200 kHz blue connector ice transducer with a 7-foot cable.  Features: 83 kHz With 52° Beam Width 200 kHz With 22° Beam Width Up to 1000-Foot (300-Meter) Range at 83 kHz 1 Internal Broadband Ceramic Ice mount Compatible with all Blue sonar connector displays

SS75 High Chirp 12 Degree Bronze Thru-Hull xSonic Transducer Airmar’s low-profile, Chirp-ready transducer models are the perfect addition to smaller boats, such as center consoles. The high-frequency band has a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs, and other structures. High frequency also shows amazing target separation on baitfish and schooling gamefish. The SS75H transducer, operating at 130 to 210 kHz, delivers up to 80 kHz of total bandwidth in just one installation for outstanding bottom detail and fish-target resolution. This Tilted Element™ transducer has the element fixed at a 12-degree angle within the housing. Because the transducer is installed almost flush with the hull, the tilt corrects for the hull deadrise. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer. Features: Depth and fast-response water-temperature sensing 600 W of power with a maximum depth of 214 m (700') High frequency (130 to 210 kHz) 15- 9 degree beamwidth High frequency delivers great shallow-water performance, bottom detail, and clear fish-target returns Low-profile, thru-hull housing provides good display resolution at speed when installed properly Recommended for stepped, planning, or displacement hull Stainless steel housing for use in all hull materials Patented Xducer ID® technology Specifications: Brand: Airmar Technology Acoustic Window: Urethane Cable-Length: 10 m (33') Common Use: Fishing, Commercial Fishing Connector: Simrad 9-Pin, Lowrance 9-Pin, Navico 9-Pin Country of Origin: USA Cross Reference: 000-13912-001 Deadrise Range: 8-15 degrees Display Connector: 9N Frequency Band: High Functions: Depth, Temperature High Frequency: 130-210 kHz High Frequency Beamwidth: 15-9 degrees Hole Size: Fiberglass or wood hull—70 mm or 2-13/16", Metal hull—79 mm or 3-1/8" Hull Material: Compatible w/ all hull materials Material: Stainless Steel Max Deadrise: Up to 24 degrees Max Deadrise Angle: 24 degrees Max Depth: 214 m (700') Max Vessel LOA: Up to 8 m (26') Mix and Match Series: 12-Pin Chirp Mounting Style: Tilted Element Thru-Hull Power Rating: 600 W Retractable housing: No Sensor Connector: MMC Single or Dual Frequency: CHIRP-Ready Single-Band Tilt Angle: 12 degrees Tilted Element: Yes Weight: 1.4 kg (3 lbs.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Tilted Element™ 12 degree titled version is designed for 8 degree - 15 degree deadrise angles For use with Raymarine DSM250 or DSM300 sounder modules Features: Depth/Temp 50/200 kHz 1 kW RMS High-performance Bronze Step up to a 1kWWithout a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.

B164 Tilted Element™ 20 degree titled version is designed for 16 degree - 24 degree deadrise angles. for use with Raymarine DSM250, DSM300 sounder modules Features: Depth/Temp 50/200 kHz 1 kW RMS High-performance Bronze Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.