Deluxe Lift 'N Lock Anchor Control Deluxe anchor lifts are for small to medium size open boats. It incorporates the pull-up lock and release mechanism making setting or recovering the anchor easier. Will support up to a 20-pound anchor when using a 1/2-diameter line.   Features: High-impact, reinforced nylon Uses 1/4-inch to 7/16-inch diameter line (sold separately) Stainless steel shafts Easy pull-up, lock, and release *Line sold separately

Standard Lift 'N Lock Anchor Control Attwood’s easy-to-use Lift 'N Lock system takes the effort out of dealing with heavy and unwieldy anchors; zinc-plated steel makes this an economical yet durable must-have accessory. Features: Zinc-plated steel is economical yet durable supporting anchors up to 20 pounds Uses 1/4-inch to 7/16-inch diameter line (sold separately) Steel sheave controls the anchor from any position Nylon pulleys resist corrosion and the elements *Line sold separately

RAM® Drop-N-Lock™ Scanner Gun Holder The RAM Drop-N-Lock™ Scanner Gun Holder is a specially designed cradle that will hold most types of Gun Scanner handles. On the side of the cradle is a spring loaded leaver that will securely hold the Gun Scanner in the cradle. Simply drop the scanner handle into the holder and it will lock in place immediately. To remove simply lift the tab behind the holder and your scanner gun will lift right out with ease. Internal Holder Dimensions: Inside Width: 1.46" Inside Length: 2.5" Inside Height: 5.11" Specifications: Material: High Strength Composite  Note: The "U" in the part number reflects product packaged in poly bag

Twist n' Lock Pump Assembly The intuitive simple to use Twist Lock handle works by locking the redesigned piston assembly into place helping to prevent back flow of any waste water into the bowl. Base valve gasket is included. Compatible Devices: 29090 Series 29120 Series WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

27"-48" Twist-Lock Steering Control Arm Fits 7/8"-1" Wheels Forespar's quick-release Steering Control Arm extends functional range when behind the wheel. Made specifically for use while motoring or easy sailing, the control arm allows the driver to move away from the helm station and still control the steering. This extended range of movement has two specific benefits. First, it enhances safety by allowing the helmsman to move outboard to the rail, increasing their forward sightline. This is especially helpful when trying to see around large headsails. Second, it allows for a number of new sitting positions for additional comfort. On many boats this means the driver can now safely relax on the stern rail seat. The Forespar Steering Control Arm uses a twist-lock extension with a special quick-release attachment clamp mounted to the wheel. It installs in seconds and can be easily deployed or removed with the simple push of a button.

LightArmor Fold-Down Anchor/Masthead Light - 12" - 12V Attwood is proud to introduce one of the most innovative navigational lighting products available today. Achieving 3NM of 360° visibility while drawing a fraction of the power of traditional incandescent lights, Attwood's 3NM LED Masthead/Anchor light is one of the first of its kind. Constructed of corrosion resistant composites with stainless steel accents, this product was designed for the harsh coastal marine environment. All lights come equipped with a durable folding base cast from Attwood's blend of enhanced 316 stainless steel alloy. For use on boats up to 65.6' (20M)Attwood's proprietary optics design draws only 1.8W at 12VDC - the lowest power draw of any 2-mile all-round light on the market today! Lights are rated for 50,000+ hours of use and feature a 10 year warranty. Features: USCG certified for boats up to 65' (20M) Provides 3-mile, 360° illumination Light Armor Anchor/Masthead navigation light engine Shock, corrosion-and water-proof electronics Durable, anodized aluminum pole Includes Light Armor Fold-Down Base Cam-lock bases include integrated wire-management Easy, single-handed cam-lock operation Stainless steel Over 50,000 hour life 10-year warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Kayak Hoist System Attwood's Kayak Lift Hoist is designed for the storage of kayaks, canoes, bikes, ladders and so much more. The pulley systems are constructed to allow one person can hoist any kayak, while the hook and locking mechanisms are able to safely hold up to 120 lbs. Features on this kayak storage hoist include an easy lifting pulley system and 2-inch wide webbing hand straps. All hardware needed for mounting this kayak hoist is included with your purchase. Place the Black Attwood Kayak Lift Hoist in your garage or storage shed, and you are set to keep your kayak up and off the ground all winter. Features: Safety holds up to 120 lbs Easy lifting pulley system 2" wide webbing straps Color: Black Includes: All mounting hardware

Attwood LED 12V Combination Anchor/Streaming Light Edson offers the 67510 Attwood LED Anchor/Steaming Light (72" Wire Length) that is specifically designed for Edson's Vision Series Light Arms. With 3NM of 360° visibility while drawing a fraction of the power of traditional incandescent lights, Attwood's 3NM LED Masthead/Anchor light is one of the first of its kind. Constructed of corrosion resistant composites with stainless steel accents, this product was designed for the harsh coastal marine environment. For use on boats up to 65.6 ft. (20 meters) The 67510 Attwood LED Anchor/Steaming Light requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately.

SWIVL-EZE 7x7 Zinc Plated  Steel 3/4" Pin Base 7" x 7" Lock'N-Pin 3/4" Pin Base SP-67739-T is zinc plated steel. It features a threaded bronze bushing for secure fit and durability. Easy to install with six screws or bolts through the deck. Add more seating to your pontoon, fishing or cruising boat with Attwood seating products. Attwood develops high value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions. Features: 7" x 7" Lock'N-Pin 3/4" Pin Base is a zinc plated steel top plate. Works with a threaded pedestal pin and features an acetal bushing for secure fit and durability Six bolt or screw attachment (hardware not included) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Anchor Lock w/ Flush Deck Mount (P/N 244) Anchor release system for small boats in still-water fishing situations.  Features: Easy lock and release action allows anchor line adjustment with only one hand.  For use with rope up to 1/2' diameter.  Tough construction and roller bearing for smooth, quiet operation. Includes No. 244 Flush Mount Bracket Mount Dimensions: 4" x 2" x 2" Bolting Dimensions: 1-15/16" 3-3/16" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SkyLock 800 The Barton SkyLock 800 features 316 stainless steel side plates, glass-reinforced nylon cover plates, and an internal self-locking aluminum cam to lift and lock loads securely using lines of 8 12mm. The clever design and construction of the locking cams means the control line will never allow loads to drop even when accidentally released. Designed for use in conjunction with 3:1 or 4:1 purchase systems. Can be used for commercial and leisure marine operations including a davit hoist system to lift dinghies, outboards, provisions, and equipment on board, especially useful when short-handed. Specifications: SWL: 800kg/1,760lbs Break Load: 1600kg /3500lb Maximum line: 12mm Length: 152 mm Height: 38 mm Width: 110 mm Weight: 450 grams

Shakespeare Antenna Lift N Lay Mount Shakespeare's Style 495 provides a convenient Lift - and - Lay feature so you can easily lower your antenna for fishing, boat storage, or towing. It attaches to a deck, and the included leveling plate adjusts for sloping surfaces. The mount can be used on a vertical surface by adding the Style 4000 Angle Bracket (sold separately). Positive snap action - Lift antenna up and then Lay it down Rugged polycarbonate construction Has 3/8" - 24 thread brass insert Standard 1" - 14 thread Handles antennas up to 8' length Leveling plate included for mounting to sloping deck

The ARM2502 comes with a locking pin designed to lock your TV against the wall during transit. This arm provides the perfect solution to most installations. Excellent for wall mounting, simply lift the locking pin and the arm swings out to 410mm from the wall. With double linkages this arm can bend and turn to fit almost any application. The Vesa bracket plate fits 75mm - 100mm - and 125mm mounting arrangements with lockable grub screws. So, you can have the TV fixed to the bracket or unlock the screws and remove it from the bracket and take the TV with you. The ARM2502 is the perfect choice for multiple application installations. Weight Capacity: 10 kg (22.05 lbs) TV Size: 10" to 22" Mounting: 75mm Vesa, 100mm Vesa, 125mm Vesa all included Extension: 90mm to 410mm with locking pin Dimensions: Against wall: 270mm (10.63")H x 195mm (7.68")W x 80mm (3.15")D Extended: 270mm (10.63")H x 80mm (3.15")W x 410mm (16.14")D

Shakespeare Style 5206-N VHF Marine - Reduced Length Version 8' LENGTH 6dB END-FED WITH MATCHING STUB Same as the Style 5206-C, but the 5206-N has a nylon ferrule. An economical and lightweight, self-supporting antenna for good communications where range is not the predominant factor. Quality copper cable elements for good range and efficiency Nylon ferrule with standard 1"-14 thread Includes 15' RG-58 cable and a PL-259 connector Suggested mount: Shakespeare Style 495 Lift-n-Lay Mount or Style 4186 Ratchet Mount Twin to: Shakespeare Styles 5205 and 5207 CB Marine antennas One section Shakespeare Limited Warranty: 2 years Technical Specifications: Frequency: VHF Marine band Bandwidth: 3 MHz SWR: 1.5:1 @156.8 MHz Impedance: (Ohms): 50 Gain: 6 dB Max Input (Watts): 50 DC Ground: NO - the antenna will read "open circuit" when checked with an ohm meter or continuity tester. Termination: RG-58 Height (feet): 8 Polarization: Vertical Radiation pattern: Omni-directional

29mm Single Bullet Block Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications.  Features: Sheave: 29mm (1-1/8") Maximum Line: 8mm (5/16") Maximum Working Load: 136kg (300lb)