X-Grip® Large Phone Mount with Low-Profile Medium Tough-Claw™ The RAM® X-Grip® Large Phone Mount with Low-Profile RAM® Tough-Claw™ consists of the medium RAM® Tough-Claw™ base and the universal large RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The large RAM® X-Grip® features an ‘X’ design that expands and contracts to secure your phone and includes a device tether recommended for outdoor applications. With the RAM® Tough-Claw™ base connected, easily attach the RAM® X-Grip® to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter. This kit is compatible with handheld devices that fit the dimensions listed below. It is important to verify the dimensions of your handheld device with its case, sleeve, or skin when determining the overall size. Features: Low-profile phone mount clamps to your handlebar with the turn of a single knob includes a medium version of the RAM® Tough-Claw™ base, designed to clamp to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter; rubber pads provide stable gripping and protection of the mounting surface The spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; Includes optional device tether for peace of mind during rugged use; Check the compatibility section below to see if your phone will fit Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: (1) Optional Tether and (1) Glue Tube for Rubber Caps Hole Dimensions: Width Range: 1.75" - 4.5", Depth Range: .875" max Clamp Range (inch): 1" - 1.6" diameter Materials: High-strength composite and stainless steel Weight: 0.78 lb. Compatible Devices: Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, and iPhone 14 Pro Max Blackberry: Evolve X Blackview: BV9900 and BV9900 Pro Cat: S42, S62, and S62 Pro Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, and RV 770 LMT-S Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, and Pixel 7 Pro HTC: Bolt and U Ultra Huawei: Mate 20 X Kyocera: DuraSport 5G LG: Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, and X venture Magellan: TR5 and TR7 Motorola: moto e4 plus, moto g4, moto z2, moto z2 play, and moto z3 Rand: McNally Road Explorer 5 and McNally TND 540 Razer: Phone 2 Samsung: Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, and Galaxy S23 Ultra Sonim: RS60 Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, and Xperia XZ Premium

X-Grip® Large Phone Mount with Handlebar U-Bolt Base The RAM-B-149Z-A-UN10U consists of a zinc coated u-bolt base, short double socket arm and universal spring loaded X-Grip IV cradle for large phones and phablets. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". The mount is designed with a RAM B size 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip IV cradle expands and contracts, allowing for a perfect custom fit of your phone or phablet. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.  Specifications: Includes: (QTY. 1), Optional Tether Included U-Bolt Dimensions: Accommodates rails from 0.5" to 1.25" in diameter Cradle Dimensions: Minimum Width = 1.75" (Minimum Height = 5.5") Maximum Width = 4.5" (Minimum Height = 3.25") Depth = 0.875" Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components and High Strength Composite Ball Size: B Size 1" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 0.75 lbs.

X-Grip® Large Phone Mount with Brake/Clutch Reservoir Base The RAM-B-174-UN10 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, double socket arm and universal X-Grip® large phone/phablet holder. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the X-Grip® mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.  Specifications: Includes: (QTY. 1), Optional Tether Included Cradle Dimensions: Minimum Width = 1.75" (Minimum Height = 5.5") Maximum Width = 4.5" (Minimum Height = 3.25") Depth = 0.875" Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: B Size 1" Rubber Ball Note: Part number reflects product packaged in a retail box for store shelf display. To see if the RAM-B-174-UN7 will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58". RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 1.0 lbs.

X-Grip® Large Phone Mount with Drill-Down Base  The RAP-B-138-UN10U consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and universal spring loaded X-Grip® cradle for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the mount to your optimum viewing position. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

RAM® X-Grip® Large Phone Mount with RAM® Tough-Strap™ Handlebar Base The RAM® Tough-Strap™ is the lowest-profile rugged mounting solution for any bike or motorcycle handlebars. With two different size straps, easily install the RAM® Tough-Strap™ on any mountain bike, road bike, or e-bike with a simple twist of a knob. This RAM® Tough-Strap™ Handlebar Mounting kit utilizes the RAM® Pin-Lock™ system to secure the included Large RAM® X-Grip® for a low-profile fitting on your handlebar. The long strap is used for bar diameters ranging from 1.25"-1.38" while the short strap is used for diameters ranging from 0.875"-1". Utilize the extra rubber strip to cut down to the diameter range of 1"-1.125" for a more custom fit. Take the low-profile RAM® Tough-Strap™ on your next adventure on and off the road.  Features: Low profile handlebar mount for large phones includes the new RAM® Tough-Strap™ and large RAM® X-Grip®, easily attaching to your handlebar with the turn of a single knob; includes two different strap sizes for handlebars ranging from 0.875"-1", 1"-1.25" and 1.25"-1.38" Ideal handlebar phone mount for all bike types, including mountain bikes, road bikes, and e-bikes Spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use; check compatibility section below to see if your phone will fit Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Backed by a lifetime warranty Hardware Included: (1) X-Grip Phone Holder (1) #10-24 x 2" Hex Bolt (1) Long Strap (1) Short Strap (1) Long Rubber Strip (1) Short Rubber Strip (1) Tightening Knob (1) Tether Specifications: Holder Dimensions: Width Range: 1.75"-4.5", Depth Range: .875" Max Clamp Range: 0.875"-1.38" Materials: High Strength Composite Weight: 0.41lbs

RAM® X-Grip® Phone Mount with RAM® Tough-Strap™ Handlebar Base The RAM® Tough-Strap™ is the lowest-profile rugged mounting solution for any bike or motorcycle handlebars. With two different size straps, easily install the RAM® Tough-Strap™ on any mountain bike, road bike, or e-bike with a simple twist of a knob. This RAM® Tough-Strap™ Handlebar Mounting kit utilizes the RAM® Pin-Lock™ system to secure the included standard size RAM® X-Grip® for a low-profile fitting on your handlebar. The long strap is used for bar diameters ranging from 1.25"-1.38" while the short strap is used for diameters ranging from 0.875"-1". Utilize the extra rubber strip to cut down to the diameter range of 1"-1.125" for a more custom fit. Take the low-profile RAM® Tough-Strap™ on your next adventure on and off the road. Features: Low profile handlebar mount for standard size phones includes the new RAM® Tough-Strap™ and RAM® X-Grip®, easily attaching to your handlebar with the turn of a single knob; includes two different strap sizes for handlebars ranging from 0.875"-1", 1"-1.25" and 1.25"-1.38" Ideal handlebar phone mount for all bike types, including mountain bikes, road bikes, and e-bikes Spring-loaded 'X' design for standard size phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use; check compatibility section below to see if your phone will fit Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Backed by a lifetime warranty Hardware Included: (1) X-Grip Phone Holder (1) #10-24 x 1" Machine Screw (1) #10-24 Nylock Nut Pin-Lock Base (1) Straight Rubber Spacer (1) Angled Rubber Spacer (2) Cable Ties (1) Rubber Adhesive Pad (1) Glue For Caps (1) Tether Specifications: Holder Dimensions: Width Range: 1.875" - 3.25", Depth Range: .875" Max Clamp Range: 0.875" - 1.38" Materials: High strength composite Weight: 0.37lbs

RAM® X-Grip® Large Phone Mount with Vibe-Safe™ & Reservoir Base The RAM® X-Grip® Large Phone Mount with RAM® Vibe-Safe™ & Reservoir Base (RAM-B-174-UN10-462) is a combination of the RAM® X-Grip® Phone Mount with Motorcycle Brake/Clutch Reservoir & Handlebar Base and the RAM® Vibe-Safe™—RAM's vibration damping accessory is designed to protect electronic devices from a wide range of vibration frequencies. The RAM® X-Grip® can rotate between portrait and landscape by loosening the center screw. This product comes with one (1) medium B size arm, one (1) RAM® Motorcycle Brake/Clutch Reservoir, and a handlebar Ball Base that attaches to either the handlebar or brake/clutch and accommodates rails from .5" - 1.25" in diameter, and an optional device tether that is recommended for outdoor applications. This kit also includes one (1) zinc-coated metal U-bolt that accommodates rails ranging from 0.5" to 1.25" in diameter. The holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of the handheld device with a case, sleeve, or skin when determining the overall size. Features: RAM® Vibe-Safe™ dampens a wide range of vibration frequencies NPT thread connection allows for rotation between portrait and landscape while remaining secure Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Unique structure and thoughtfully designed with all industries in mind Backed by a lifetime warranty Specifications: Hardware Included: (1) Optional Tether, (1) Glue Tube for Rubber Caps, (2) M6 x 55mm Hex Bolts, (2) #1/4-20 x 2" Hex Bolts, (2) 1/4"-20 x 2.5" Hex Bolts, (2) 1/2" Spacers, (2) 1/4" Split Lock Washers, (1) 1/4"-20 U-Bolt for .5" - 1" Rails, (1) 1/4"-20 U-Bolt for 1" - 1.25" Rails, (2) 1/4"-20 Nylock Nuts, (2) Rubber Caps, and (1) U-Bolt Spacer Holder Dimensions: Width Range: 1.75" - 4.5" and Depth Range: .875" max Clamp Range: .5" - 1.25" diameter Socket to Socket Length: 3" Ball Size: B size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb Materials: Marine-grade aluminum, High strength composite, and Stainless Steel  Packaging Type: Retail Bag Weight: 1.26 lbs Compatible Devices: Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, iPhone 14 Pro Max, iPhone 15, iPhone 15 Plus, and iPhone 15 Pro Max Blackberry: Evolve X Blackview: BV9900 and BV9900 Pro Cat: S42, S62, and S62 Pro Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, and RV 770 LMT-S Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, Pixel 7 Pro, and Pixel 8 Pro HTC: Bolt and U Ultra Huawei: Mate 20 X Kyocera: DuraSport 5G LG: Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, and X venture Magellan: TR5, TR7 Motorola: moto e4 plus, moto g4, moto z2, moto z2 play, and moto z3 Rand: McNally Road Explorer 5 and McNally TND 540 Razer: Phone 2 Samsung: Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, and Galaxy S23 Ultra Social: Mobile Rhino C6 Sonim: RS60 Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, and Xperia XZ Premium

RAM® X-Grip® Large Phone Mount with Vibe-Safe™ & U-Bolt Base - Medium The RAM® X-Grip® Large Phone Mount with RAM® Vibe-Safe™ & U-Bolt Base - Medium (RAM-B-149Z-UN10-462) is a combination of the RAM® X-Grip® Large Phone Mount with Handlebar U-Bolt Base and the RAM® Vibe-Safe™—RAM's vibration damping accessory is designed to protect electronic devices from a wide range of vibration frequencies. This product comes pre-assembled with the device tether that is recommended for outdoor applications. The RAM® X-Grip® can rotate between portrait and landscape by loosening the center screw. This product comes with one (1) medium B-size arm and one (1) RAM® U-Bolt Base that accommodates rails from .5" - 1.25" in diameter, as well as an optional device tether that is recommended for outdoor applications. The holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of the handheld device with a case, sleeve, or skin when determining the overall size. Features: RAM® Vibe-Safe™ dampens a wide range of vibration frequencies Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Unique structure and thoughtfully designed with all industries in mind Backed by a lifetime warranty Specifications: Hardware Included: (1) Optional Tether, (1) Glue Tube for Rubber Caps, (1) 1/4"-20 U-Bolt for .5" - 1" Rails, (1) 1/4"-20 U-Bolt for 1" - 1.25" Rails, (2) 1/4"-20 Nylock Nuts, (2) Rubber Caps, and (1) U-Bolt Spacer Holder Dimensions: Width Range: 1.75" - 4.5" and Depth Range: .875" max Clamp Range: .5" - 1.25" diameter Socket to Socket Length: 3" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb Materials: Marine-grade aluminum, High strength composite, and Stainless Steel  Packaging Type: Retail Bag Weight: 1.07 lbs Compatible Devices: Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, iPhone 14 Pro Max, iPhone 15, iPhone 15 Plus, and iPhone 15 Pro Max Blackberry: Evolve X Blackview: BV9900 and BV9900 Pro Cat: S42, S62, and S62 Pro Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, and RV 770 LMT-S Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, Pixel 7 Pro, and Pixel 8 Pro HTC: Bolt and U Ultra Huawei: Mate 20 X Kyocera: DuraSport 5G LG: Fiesta Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, and X venture Magellan: TR5 and TR7 Motorola: moto e4 plus, moto g4, moto z2, moto z2 play, and moto z3 Rand: McNally Road Explorer 5 and McNally TND 540 Razer: Phone 2 Samsung: Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, and Galaxy S23 Ultra Social: Mobile Rhino C6 Sonim: RS60 Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, and Xperia XZ Premium

RAM® X-Grip® Large Phone Mount with Vibe-Safe™ & U-Bolt Base - Short The RAM® X-Grip® Large Phone Mount with RAM® Vibe-Safe™ & U-Bolt Base - Short (RAM-B-149Z-A-UN10-462) is a combination of the RAM® X-Grip® Phone Mount with Handlebar U-Bolt Base and the RAM® Vibe-Safe™—RAM's vibration damping accessory is designed to protect electronic devices from a wide range of vibration frequencies. This product comes pre-assembled with the device tether that is recommended for outdoor applications. The RAM® X-Grip® can rotate between portrait and landscape by loosening the center screw. This product comes with one (1) short B-size arm and one (1) RAM® U-Bolt Base that accommodates rails from .5" - 1.25" in diameter, as well as an optional device tether that is recommended for outdoor applications. The holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of the handheld device with a case, sleeve, or skin when determining the overall size. Features: RAM® Vibe-Safe™ dampens a wide range of vibration frequencies Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Unique structure and thoughtfully designed with all industries in mind Backed by a lifetime warranty Specifications: Hardware Included: (1) Optional Tether, (1) Glue Tube for Rubber Caps, (1) 1/4"-20 U-Bolt for .5" - 1" Rails, (1) 1/4"-20 U-Bolt for 1" - 1.25" Rails, (2) 1/4"-20 Nylock Nuts, (2) Rubber Caps, and (1) U-Bolt Spacer Holder Dimensions: Width Range: 1.75" - 4.5" and Depth Range: .875" max Clamp Range: .5" - 1.25" diameter Socket to Socket Length: 1.75" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb Materials: Marine-grade aluminum, High strength composite, and Stainless Steel  Packaging Type: Retail Bag Weight: 0.99 lbs Compatible Devices: Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, iPhone 14 Pro Max, iPhone 15, iPhone 15 Plus, and iPhone 15 Pro Max Blackberry: Evolve X Blackview: BV9900 and BV9900 Pro Cat: S42, S62, and S62 Pro Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, and RV 770 LMT-S Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, Pixel 7 Pro, and Pixel 8 Pro HTC: Bolt and U Ultra Huawei: Mate 20 X Kyocera: DuraSport 5G LG: Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, and X venture Magellan: TR5 and TR7 Motorola: moto e4 plus, moto g4, moto z2, moto z2 play, and moto z3 Rand: McNally Road Explorer 5 and McNally TND 540 Razer: Phone 2 Samsung: Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, and Galaxy S23 Ultra Social: Mobile Rhino C6 Sonim: RS60 Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, and Xperia XZ Premium

RAM® X-Grip® Large Phone Mount with Track Ball™ Base & Long Arm This RAM® Track Mount for large-size phones (RAM-HOL-UN10B-C-354-TRA1U) is made up of a B-size 1" ball molded to a high-strength composite base, a rubber friction washer, and a stainless steel T-bolt for sliding into any third-party track system, or the RAM® Tough-Track™ line of tracks. Simply insert or slide the Track Ball™ into your track and twist the ball clockwise to tighten it in place. Twist counterclockwise to loosen or adjust the ball. Included in this kit are a B-size long-length socket arm and a RAM® X-Grip® for large-size phones with or without a case. This track mount is ideal for mounting devices to the Jeep JL and Gladiator dashboard track mounts (RAM-DT-204-TRACK-A12U) and the new Ford Bronco dashboard track mount (RAM-DT-207-TRACK-EXA-29BU). Features: 1" B-size RAM® ball with adjustable T-bolt designed for track mounting systems, including the RAM® Tough-Track™ and other third-party track systems Features a rubber friction washer and a stainless steel T-bolt; simply insert it into your track and twist the ball clockwise to tighten Includes a B-size long-length socket arm and a large-size RAM® X-Grip® phone holder Spring-loaded X-Grip® holds large-size phones and includes an optional device tether for peace of mind during rugged use Backed by a lifetime warranty Specifications: Hardware Included: (1) Optional Tether & (1) Glue Tube for Rubber Caps Holder Dimensions (inch): Width Range: 1.75" - 4.5" / Depth Range: .875" max Socket to Socket Length (inch): 5.31" Ball Size (inch): B Size (1") Weight Capacity: Standard Use: 2 lbs. / Heavy-Duty Use: 1 lb. Materials: Marine-grade aluminum, high-strength composite, stainless steel Packaging Type: Poly Bag Weight: 0.84 lb. Compatible Devices: Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, and iPhone 14 Pro Max Blackberry: Evolve X Blackview: BV9900, BV9900 Pro Cat: S42, S62, S62 Pro Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, RV 770 LMT-S Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, Pixel 7 Pro HTC: Bolt, U Ultra Huawei: Mate 20 X Kyocera: DuraSport 5G LG: Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, X venture Magellan: TR5, TR7 Motorola: Moto e4 plus, moto g4, moto z2, moto z2 play, moto z3 Rand: McNally Road Explorer 5, McNally TND 540 Razer: Phone 2 Samsung:  Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, Galaxy S23 Ultra Sonim: RS60 Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, Xperia XZ Premium

Handlebar Rail Mount w/Zinc Coated U-Bolt Base & Universal X-Grip® Large Phone/Phablet Cradle The RAM-B-149Z-UN10U consists of a zinc coated u-bolt base, double socket arm and universal spring loaded X-Grip® IV cradle for large phones and phablets. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". The mount is designed with a RAM B size 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip® IV cradle expands and contracts, allowing for a perfect custom fit of your phone or phablet. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. U-Bolt Dimensions: 0.50" to 1.25" Cradle Dimensions Minimum Width = 1.75" (Minimum Height = 5.5") Maximum Width = 4.5" (Minimum Height = 3.25") Depth = 0.875" Features: Rustproof High strength composite and stainless steel construction Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments Lifetime warranty Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 0.75 lbs.

RAM® X-Grip® Large Phone Mount with RAM® Snap-Link™ Tough-Claw™ The RAM-HOL-UN10-400U consists of the small Tough-Claw™ base and universal X-Grip® cradle for large phones and phablets. The X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your smart-phone behind foam pads and plastic. The X-Grip® cradle expands and contracts for perfect fit of most smart phones. This mount rotates 360 degrees. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions: Minimum Width = 1.75" (Minimum Height = 5.5") Maximum Width = 4.5" (Minimum Height = 3.25") Depth = 0.875" Clamping Range: Rail/Tube Surfaces: 0.625" to 1.5" Flat Surfaces: 0" to 1.14" Features: Rustproof High strength composite and stainless steel construction Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments Lifetime warranty Material: High Strength Composite & Stainless Steel Note: The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight:  0.51 lbs.

RAM® X-Grip® Large Phone Mount with Vibe-Safe™ & Small Tough-Claw™ The RAM® X-Grip® Large Phone Mount with Vibe-Safe™ & Small Tough-Claw™ (RAM-HOL-UN10-462-400) is a combination of the RAM® X-Grip® Phone Mount with Low-Profile Small Tough-Claw™ and the RAM® Vibe-Safe™—RAM's vibration damping accessory is designed to protect electronic devices from a wide range of vibration frequencies. The RAM® X-Grip® can rotate between portrait and landscape by loosening the center screw. With the RAM® Tough-Claw™ base, easily attach the RAM® X-Grip® with RAM® Vibe-Safe™ on round, square, and odd-shaped rails and bars ranging from.625" to 1.14” in outer diameter. This product comes with an optional device tether that is recommended for outdoor applications. The holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of the handheld device with a case, sleeve, or skin when determining the overall size. Features: RAM® Vibe-Safe™ dampens a wide range of vibration frequencies Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Unique structure and thoughtfully designed with all industries in mind Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (1) Optional Tether, (1) Glue Tube for Rubber Caps Holder Dimensions: Width Range: 1.75" - 4.5", Depth Range: .875" max Clamp Range: 1"-1.6" diameter Materials: High-strength composite and stainless steel Packaging Type: Retail Bag Weight: 0.75 lbs Compatible Devices: Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, iPhone 14 Pro Max, iPhone 15, iPhone 15 Plus, and iPhone 15 Pro Max Blackberry: Evolve X Blackview: BV9900 and BV9900 Pro Cat: S42, S62, and S62 Pro Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, and RV 770 LMT-S Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, Pixel 7 Pro, and Pixel 8 Pro HTC: Bolt and U Ultra Huawei: Mate 20 X Kyocera: DuraSport 5G LG: Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, and X venture Magellan: TR5 and TR7 Motorola: moto e4 plus, moto g4, moto z2, moto z2 play, and moto z3 Rand: McNally Road Explorer 5 and McNally TND 540 Razer: Phone 2 Samsung: Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, and Galaxy S23 Ultra Social: Mobile Rhino C6 Sonim: RS60 Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, Xperia XZ Premium

RAM® X-Grip® Large Phone Mount with Grab Handle M6 Bolt Base The RAM® X-Grip® Large Phone Mount with Grab Handle M6 Bolt Base (RAM-B-186-M6-UN10U) is easily installed on any vehicle's grab handle that features an M6 threaded bolt. This solution includes a medium-length double socket arm, the popular spring-loaded RAM® X-Grip® large phone holder, and a RAM® ball base. With a hollow center, users can feed the 6mm bolt or smaller to screw into the vehicle's grab handle for a stable mounting base with no drilling required. Keep a windshield clean and the phone mount out of the way with this grab handle mount for phones, GPS devices, and more! Confirmed fitments for this product include the Toyota Tundra and all Ford Bronco models, including the base model, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage, and Raptor—however, any vehicle that employs a 6mm bolt or smaller on its structure is compatible with this product. A smaller bolt can be used, though the load capacity decreases with the bolt size. Features: Spring-loaded holder features adjustable side supports that provide a secure fit for a variety of large phones and other devices; easily insert and remove your phone with one hand Compatible with any vehicle grab handle with removable hardware & M6 threaded bolt; hardware included B-size 1" RAM® rubber ball; ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: (1) Optional Tether, (1) Glue Tube for Rubber Caps, (1) M6 x 60mm Socket Head Cap Screw, (1) M6 Split Lock Washer, (1) 1/2" Spacer Holder Dimensions: Width Range: 1.75" - 4.5"; Depth Range: .875" max Socket to Socket Length: 3" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb Materials: Marine-grade aluminum, high-strength composite, stainless steel Packaging Type: Polybag Weight: 0.61 lbs Compatible Devices: Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, iPhone 14 Pro Max, iPhone 15, iPhone 15 Plus, and iPhone 15 Pro Max Blackberry: Evolve X Blackview: BV9900 and BV9900 Pro Cat: S42, S62, and S62 Pro Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, and RV 770 LMT-S Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, Pixel 7 Pro, and Pixel 8 Pro HTC: Bolt and U Ultra Huawei: Mate 20 X Kyocera: DuraSport 5G LG: Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, and X venture Magellan: TR5 and TR7 Motorola: moto e4 plus, moto g4, moto z2, moto z2 play, and moto z3 Rand: McNally Road Explorer 5 and McNally TND 540 Razer: Phone 2 Samsung: Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A15, Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, Galaxy S23 Ultra, Galaxy S24+, Galaxy S24 Ultra, and Galaxy XCover7 Social: Mobile Rhino C6 Sonim: RS60 Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, and Xperia XZ Premium Compatible Vehicles: Ford: Bronco (2021-2023) Toyota: Tundra (2022) *Safety Precaution: Do not install this product near or over an airbag deployment area or in a location that obstructs the driver’s vision or interferes with vehicle operation. National Products, Inc. does not assume responsibility or liability for any such personal injury, death, or property damage.

RAM® X-Grip® Large Phone Mount with RAM® Twist-Lock™ Suction Cup Base Ideal for vehicle windshields, the RAM-B-166-C-UN10U consists of a 3.3" diameter RAM® Twist-Lock™ suction cup base, long length double socket arm, and the popular spring-loaded RAM® X-Grip® large phone holder. The RAM® X-Grip® features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite, this large version of the RAM® X-Grip® fits phones ranging from 1.75" to 4.5" in width and keeps your device completely functional and accessible. RAM® ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle – while also extending the life of your phone by providing shock and vibration damping. For outdoor applications, the RAM® X-Grip® includes a device tether that is recommended for added security and peace of mind.  Features: Spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use Includes RAM® Twist-Lock™ suction cup base ideal for vehicle windshields and long length, B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (1) Optional Tether, (1) Glue Tube for Rubber Caps Holder Dimensions: Width Range: 1.75" - 4.5", Depth Range: .875" max  Suction Size: 3.3" Socket-to-Socket Length: 5.31" Ball/Socket Size: B Size (1") Weight Capacity: 2lbs Materials: Marine-grade aluminum, High strength composite, Stainless steel