DST810 Plastic Smart Sensor 235kHz - NMEA 2000 - Bluetooth Depth, Speed-Through-Water, Water Temperature, Boat Attitude For a product to be considered a “breakthrough,” it has to vastly change conventional behavior and enhance abilities. The  DST810 Smart Multisensor, featuring the new Gen2 paddlewheel together with Airmar's CAST™ App, is the convergence of advanced hull data, matched with a simple and reliable way to calibrate accurate speed via a wireless device. This changes how boaters receive and deliver information to get greater performance from their hull. It is a simple, consistent way to calibrate speed-through-water regardless of what display system is on board. The DST810 and Airmar CAST App deliver capabilities that until now, were only available through expensive PC-based software. Besides water temperature, depth, and upgraded 5 Hz (5X per second) speed-through-water output, the DST810 features an integrated attitude sensor for heel and trim data. This information, combined with Airmar’s powerful and simple CAST App, makes heel-compensated speed calibration across multiple heel angles and speed ranges both fast and intuitive and is independent of the onboard instruments. All speed calibrations and NMEA configurations are stored in the DST810 sensor—not in the displays. Features 5 Hz speed output (5X per second) for visibly smoother speed-through-water reporting and faster data for better decision making Integrated attitude sensor for heel and trim benefits sailing and powerboats. Simple attitude calibration to correct for off-center mounting Hull Deadrise: Up to 22° Depth Frequency: 235 kHz Minimum Depth Range: 0.5 m (1.6') Maximum Depth Range: Up to 100 m (330')—NMEA 2000® Speed Range: Up to 45 knots Wireless Protocol: Bluetooth Low Energy (BLE) Wireless Range: Up to 30 feet depending on mount location Standard Cable Length: 6 m (20') DeviceNet—NMEA 2000® Temperature Sensor Accuracy: ±0.5°C (±1.8°F) Temperature Sensor Range: -10°C to 40°C (14°F to 104°F) Supply Voltage: 9 VDC to 16 VDC—per NMEA 2000 Wireless connectivity to Airmar's CAST App has user-friendly benefits: Calibrate the DST810 is a simple, intuitive way regardless of the instrument brand or model that is on board Conduct basic and advanced heel-compensated speed calibrations for improved speed-through-water outputs across the speed range Advanced Speed Calibration allows for manual speed entries for multiple heel angles and up to 10 speeds, formerly only possible through expensive PC software Enable and disable PGN’s and set offset and output rates The Perfect Sensor for Every Use SAILING 5 Hz speed output for visibly smoother speed data. Incredibly easy calibration via Airmar's CAST App. Wirelessly connect, calibrate speed, and configure data. DST810 stores configurations and delivers data to the NMEA 2000® network. Depth, heel-corrected speed-through-water, heel and trim, and water temperature from one installed multisensor. POWERBOATS 5 Hz speed, depth, pitch and roll, and water temperature from one installed instrument. Simple depth offsets and corrected speed-through-water via Airmar's CAST™ App. Popular depth sensor for shallow-water performance. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

GPS 24xd GPS Antenna with Heading Sensor for NMEA 2000 Network - Black The GPS 24xd position receiver and antenna give users precise location with multi-band GNSS and heading accuracy even at slow speeds. Features: Navigate to more locations with expanded GNSS support Get high-sensitivity tracking with a fast GPS update rate Accurately pinpoint, regardless of speed It’s water-resistant (IPX7) to withstand the elements Install it easily with multiple mounting options The antenna is compatible with NMEA 2000® devices In the Box: GPS 24xd NMEA 2000® Pole mount Surface mount NMEA 2000 backbone/drop cable (6 meters) NMEA 2000 T-connector Documentation Specifications: Color: Black Dimensions (D x H): 3 19/32" x 1 15/16" (91.6 mm x 49.5 mm) Weight: 7.1 oz (201 g), white; 6.2 oz (176 g), black Cable Length: 19 ft 8" (6 m) Temperature Range: -22° to 176° F (-30° to 80° C), white; -22° to 149° F (-30° to 65° C), black Case Material: Fully gasketed, high-impact plastic alloy; waterproof to IPX7 Compass-Safe Distance: 5.9" (150 mm) Power Source Input: 9-32 Vdc Input Current: 150 mA at 12 Vdc NMEA 2000 Load Equivalency Number (LEN): 3 (150 mA) Position Accuracy, Typical Marine Use: < 1-meter CEP, < 3 meters, 95%

DT800 NMEA 2000 Thru-Hull Tilted Element Smart Sensor - 20° Function: Depth / Temperature, Material: Plastic, Fixed Tilt Angle: 20° Frequency: 235 kHz, Cone: 12°, Power: 100 Watts RMS Connector: 5-Pin NMEA 2000 Features: Low-profile, retractable, thru-hull transducer offers depth and temperature functions in a single, compact housing Tilted Element Transducer – unique design tilts ceramic element inside transducer housing, giving all the advantages of a fairing block without a hull protrusion Available in fixed 0°, 12° or 20° tilt – perfect for power and sail boat applications Low-profile housing compensates for hull deadrise, does not affect hull performance and provides accurate readings at high speeds Designed with Airmar's exclusive Broadband Ceramic Technology, 235 kHz element improves resolution without sacrificing sensitivity Smart™ Sensor with embedded microelectronics – transducer element and signal processor are only millimeters apart 235 kHz frequency prevents mutual interference with other echo sounders on vessel Retractable housing with self-closing valve minimizes water flow into the vessel when transducer is removed for servicing Specifications: Mount: Thru-hull Fixed Element Tilt Angle: 20° (for 16° - 24° hull deadrise) Housing Material: Plastic Connector: 5-pin NMEA 2000® Cable Length: 20 ft. Frequency: 235 kHz Cone: 12° Power: 100 Watts RMS Depth Sensor Range: 1.6 - 594 ft. Acoustic Window Material: Urethane Compatible Hull Materials: Fiberglass or metal Hole Diameter for Installation: 2" Dimensions: 4.92" H x 2.94" OD This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

LinkUp J1939 to NMEA 2000 Gateway This single-sensor gateway is designed to upgrade your vessel sensors to NMEA 2000®. Can be easily configured through either the embedded wireless interface or NMEA 2000® by means of our Configuration Tool.  The ISO 8846:1990 compliance completes the devices by allowing their installation into compartments. Features: Waterproof sensor connection No external power supply required Wireless configuration through companion mobile App Explosion-proof housing body for engine room installation Standard DeviceNet M12 plug to interface NMEA 2000 Input signal - SAE J1939 Nominal Voltage - 12V *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NMEA 2000® Wind Sensor - 9 to 16V The wind vane turns in the direction of the wind and steers the wind direction gauge. The wind cups record the relative wind speed which in turn is displayed on the wind speed gauge. Features: AcquaLink type wind sensor Output: NMEA-2000 Measuring: Wind speed & direction Measuring system: Mechanical System: Hall-sensor & cross coils WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DT812PV-235-N2 - 235kHz - Plastic Thru Hull Smart Sensor - 12° Tilt - NMEA 2000 - 6M Cable Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183 m (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6'). Available in fixed 0°, 12°, or 20° tilt, the DT800 is perfect for power and sailboat applications. It is sold with a choice of rugged housings— plastic, bronze, or stainless steel—to accommodate any vessel type or hull material. These low-profile housings do not affect hull performance and will provide accurate readings at high speeds. Airmar's Smart™ Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible device or display. Because the ceramic is tilted inside the housing, the transducer beam is oriented straight down, resulting in strong bottom echo returns and accurate depth readings. The retractable housing with a self-closing valve reduces water flow into the vessel when the transducer is removed for cleaning. Smart™ Sensor Features Broadband ceramic available with 0°, 12° and 20° tilt options Enhanced depth performance Maximum Depth Range: 180M (594’) Minimum range 0.5M (1.6’) Urethane face provides better sensitivity Excellent high-speed performance Fixed 12° tilt for 8° to 15° deadrise NMEA 2000 output 100 W RMS power Frequency: 235 kHz Cone: 12° All models have depth and temperature 235 kHz eliminates interference with fishfinders Retractable insert provides ease of serviceability Usable Shaft Length: 57mm (2.25”) 6M(19.8”) NMEA 2000® devicenet cable and connector 51mm (2”) housing Blanking plug included Accommodates maximum hull thicknesses 54 mm (2 1/8”) Accommodates minimum hull thicknesses 6.3 mm (0.25”) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DST810 Smart™ Multisensor 23kHz Bronze NMEA 2000® Transducer - N2K Depth, Speed-Through-Water, Water Temperature, Boat Attitude! The DST810 Smart Multisensor, featuring the new Gen2 paddlewheel and AIRMAR's CAST™ app, delivers a powerful combination of best-in-class speed performance and a simple, reliable way to calibrate accurate speed using your wireless device. The Gen2 paddlewheel delivers industry-leading start-up speed-through-water data below 0.3 knots and is linear at 0.6 knots, maintaining accurate performance up to 45 knots. The DST810 and CAST app provides a simple, consistent way to calibrate speed through the water. The free CAST app delivers calibration options that, until now, were only available through expensive PC-based software. In addition to water temperature, depth, and upgraded 5.7 Hz (5X per second) speed-through-water output with improved speed resolution, the DST810 features an integrated attitude sensor for heel and trim data. This information, combined with Airmar’s powerful and simple CAST app, makes heel-compensated speed calibration across multiple heel angles and speed ranges fast and intuitive, and is independent of the onboard instruments. Features: Smoother Speed – 5.7 Hz speed output (5X per second) for visibly smoother speed-through-water reporting and faster data for better decision-making when every second counts. Integrated Attitude Sensor – for heel and trim and used in advanced speed calibration. Wireless connectivity to AIRMAR's CAST app has new user-friendly benefits: Calibrate the DST810 in a simple, intuitive way from your mobile device. Conduct basic and advanced heel-compensated speed calibrations for improved speed-through-water outputs across the speed range. Advanced speed calibration allows for manual speed entries for multiple heel angles and up to 10 speeds, formerly only possible through expensive PC software. Ultra-responsive speed begins as low as 0.3 knots and becomes linear at 0.6 knots. Speed-through-water readings stay accurate and smooth through 45 knots. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DST-810 Plastic Triducer Smart™ Multisensor NMEA2000 N2K - 6M Cable Depth, Speed-Through-Water, Water Temperature, Boat Attitude The DST810 Smart Multisensor, together with Airmar's CAST™ App, is the convergence of advanced hull data, matched with a simple and reliable way to calibrate accurate speed via a wireless device. This changes how boaters receive and deliver information to get greater performance from their hull. It is a simple, consistent way to calibrate speed-through-water regardless of what display system is on board. The DST810 and Airmar CAST App deliver capabilities that until now, were only available through expensive PC based software. Besides water temperature, depth and newly upgraded 5 Hz (5X per second) speed-through-water output, the DST810 features an integrated attitude sensor for heel and trim data. This information, combined with Airmar’s powerful and simple CAST App, makes heel-compensated speed calibration across multiple heel angles and speed ranges both fast and intuitive, and is independent of the onboard instruments. All speed calibrations and NMEA configurations are stored in the DST810 sensor—not in the displays.  Features: 5 Hz speed output (5X per second) for visibly smoother speed-through-water reporting and faster data for better decision making Integrated attitude sensor for heel and trim benefits sailing and power boats Simple attitude calibration to correct for off-center mounting Wireless connectivity to Airmar's CAST App has new user-friendly benefits: Calibrate the DST810 in a simple, intuitive way regardless of the instrument brand or model that is on board Conduct basic and advanced heel-compensated speed calibrations for improved speed-through-water outputs across the speed range Advanced Speed Calibration allows for manual speed entries for multiple heel angles and up to 10 speeds, formerly only possible through expensive PC software Enable and disable PGN’s and set offset and output rates

Airmar DST 810 Smart Transducer - 0° Degree  This plastic thru-hull NMEA 2000® smart transducer combines precise depth, speed and temperature signals with attitude sensing for heel/trim and pitch/roll data. It can read depths to 330’ and offers fast 5 Hz water speed signal output for smoother visualization on compatible chartplotters or other displays. Wireless BLUETOOTH® connectivity makes it easy to manage calibration of sensor data through the Airmar Cast app interface. And the 235 kHz sensor operating frequency helps prevent mutual interference with other echosounder devices on the vessel. The transducer’s wide, fan-shaped beamwidth of 10x44 degrees enables it to find bottom even when installed on steep deadrise hulls or heeling sailboats. Specifications: Frequency: 235kHz Power: 100w Beamwidth: 10 x 44 degrees Maximum Depth: 300 ft. Depth/Speed/Temperature: Depth, Temperature and Speed Number of Pins: NMEA 2000 Supported Deadrise/Transom Angles: 0 to 22 degrees

NMEA 2000 Transducer Smart Sensor DTS810 This combination transducer gives you accurate information about depth, speed and water temperature. The transducer is supplied with a thru-hull / ground sleeve for installation in the bottom of the vessel. The transducer can be easily pulled out for cleaning and maintenance. The data from the Triducer can be displayed on any radar, chart plotter, or device that accepts NMEA 0183 or NMEA 2000® data. The Airmar type DST810 breakthrough sensor fits into the Airmar type P617V breakthrough sleeve (included with the DST810). Because the widely used airmar thru-hull transducer type DST800 is also supplied with the thru-hull type P617V, an exchange / upgrade of existing transducers of the type DST800 with the type DST810 is possible without much effort. Popular depth sensor for shallow water performance.

DST-810 Bronze Triducer Multisensor NMEA 2000 N2K - 6M Cable The DST810 Smart Multisensor, together with Airmar's CAST™ App, is the convergence of advanced hull data, matched with a simple and reliable way to calibrate accurate speed via a wireless device. This changes how boaters receive and deliver information to get greater performance from their hull. It is a simple, consistent way to calibrate speed-through-water regardless of what display system is on board. The DST810 and Airmar CAST App deliver capabilities that until now, were only available through expensive PC-based software. Besides water temperature, depth and newly upgraded 5 Hz (5X per second) speed-through-water output, the DST810 features an integrated attitude sensor for heel and trim data. This information, combined with Airmar’s powerful and simple CAST App, makes heel-compensated speed calibration across multiple heel angles and speed ranges both fast and intuitive and is independent of the onboard instruments. All speed calibrations and NMEA configurations are stored in the DST810 sensor—not in the displays.

DST800L-235-N2 235kHz Bronze Thru-Hull - Long Stem - NMEA 2000 The DST800 is a Smart Triducer multi-sensor that offers depth, speed, and temperature functions in one compact thru-hull fitting. Digital signal processing inside the housing provides depth, speed, and temperature data to a chart plotter, radar screen, or digital display, eliminating the need for a dedicated depth sounder. One hole in the boat's hull makes this Triducer multi-sensor attractive to both boat builders and boat owners. And the retractable multi-sensor is available with NMEA 0183, NMEA 2000®, or custom CAN protocols. The wide port-starboard, fan shaped beam is able to find bottom even when installed on high-deadrise hulls or on sailboats when heeled. Features: Thru-Hull, Long-Stem Depth, Speed, and Temperature NMEA 2000® output , 100 W RMS power 235kHz output will not interfere with fishfinders Maximum depth range 100 m (330’) Minimum depth range 0.5 m (1.6’) Retractable Insert 6 m (19.8’) NMEA 2000® cable and connector Usable Shaft Length: 102 mm (4”) Can be installed with High-Performance Fairing (sold separately) Can be installed with Low-Profile adapter ring This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

P79S Smart™ Sensor with SeaTalkNG Adapter with A80373 & A06045 The P79S brings depth intelligence to your boat. Featuring Airmar’s Smart™ Sensor technology, the P79S delivers processed depth data right to the onboard network for multiple displays to use. The P79S includes a plastic mounting base that is aligned to the centerline and secured inside the hull. Then it is filled with non-toxic antifreeze. The transducer is inserted into the base and adjusted for the proper deadrise offset, ensuring the beam will be shooting straight down for maximum echo returns. The antifreeze provides the best medium to transmit through solid fiberglass and into the surrounding water. The major benefit of an in-hull transducer is no protruding features on the exterior of the hull, making it the perfect choice for trailered or lifted boats. Designed for smaller boats up to 8 m (25') with a solid fiberglass hull. Airmar's Smart Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth data is a single cable into a compatible network or display. Available as an analog sensor or a digital Smart Sensor that can output in the NMEA 0183 or NMEA 2000® format. Features: Depth only 60 W 235 kHz frequency prevents mutual interference with other echo sounders on the vessel 7° beamwidth Depth range: NMEA 0183 model has a maximum depth of 100 m (330') NMEA 2000 model has a maximum depth of 150 m (500') Installed with a hand-adjustable base. No cutting is needed. NMEA 2000 certified cable assembly No holes to drill In-hull installation can be done while the boat is in the water Urethane transducer with adjustable, plastic, mounting base Available in NMEA 0183 or NMEA 2000 standard NMEA 2000 certified or NMEA 0183 cable Installed with a hand-adjustable base No cutting is needed

Airmar DT820BV-235-N2 235 kHz Low Profile Tilted Element™ Smart™ Sensor 20° Tilt Bronze NMEA 2000 Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183M (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6'). Airmar's Smart™ Sensors have embedded microelectronics - the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible device or display. Because the ceramic is tilted inside the housing, the transducer beam is oriented straight down, resulting in strong bottom echo returns and accurate depth readings. The retractable housing with a self-closing valve reduces water flow into the vessel when the transducer is removed for cleaning. Smart™ Sensor Features Enhanced depth performance Maximum Depth Range: 180M (594') Minimum range 0.5M (1.6') Urethane face provides better sensitivity Excellent high-speed performance Fixed 20° tilt for 16° to 24° deadrise Fixed 12° tilt for 8° to 15° deadrise Fixed 0° tilt for 0° to 8° deadrise NMEA 2000 output 100 W RMS power Frequency: 235 kHz Cone: 12° All models have depth and temperature 235 kHz eliminates interference with fishfinders Retractable insert provides ease of serviceability Usable Shaft Length: 57mm (2.25") .6M(19.8') NMEA 2000® devicenet cable and connector 51mm (2") housing Blanking plug included Accommodates maximum hull thicknesses 54mm (2-1/8") Accommodates minimum hull thicknesses 6.3mm (0.25") This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Airmar DT812BV-235-N2 235 kHz Low Profile Tilted Element™ Smart™ Sensor 12° Tilt Bronze NMEA 2000 Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183M (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6'). Airmar's Smart™ Sensors have embedded microelectronics - the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible device or display. Because the ceramic is tilted inside the housing, the transducer beam is oriented straight down, resulting in strong bottom echo returns and accurate depth readings. The retractable housing with a self-closing valve reduces water flow into the vessel when the transducer is removed for cleaning. Smart™ Sensor Features Enhanced depth performance Maximum Depth Range: 180M (594') Minimum range 0.5M (1.6') Urethane face provides better sensitivity Excellent high-speed performance Fixed 20° tilt for 16° to 24° deadrise Fixed 12° tilt for 8° to 15° deadrise Fixed 0° tilt for 0° to 8° deadrise NMEA 2000 output 100 W RMS power Frequency: 235 kHz Cone: 12° All models have depth and temperature 235 kHz eliminates interference with fishfinders Retractable insert provides ease of serviceability Usable Shaft Length: 57mm (2.25") .6M(19.8') NMEA 2000® devicenet cable and connector 51mm (2") housing Blanking plug included Accommodates maximum hull thicknesses 54mm (2-1/8") Accommodates minimum hull thicknesses 6.3mm (0.25") This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.