|
RAM® Tele-Pole™ with 12" & 18" Poles, Double Swing Arms & Round Plate
The RAM-VP-SW1-1218 consists of a 18" lower female Tele-Pole™, 12" upper male Tele-Pole™, double swing arm and 2.5" round base that contains the universal AMPs hole pattern. The lower female Tele-Pole™ will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole™. The height of the Tele-Poles™, combinded, can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The double swing arm allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".
Features:
Dual articulating swing arms allows for ideal device placement
Compatible with a variety of RAM® laptop, tablet, and other device holders
Made of powder-coated steel and marine-grade aluminum
Backed by a lifetime warranty
Hardware Included:
Assembly Hardware
(4) 5/16"-18 x 1" Carriage Bolts
(4) 5/16"-18 Hex Nuts
(4) 5/16" Flat Washers
(4) 5/16" Split Lock Washers
(4) Rubber Caps
|
126.49 |
|
|
RAM® 12" Upper Pole with Double Swing Arms & Round Plate
The RAM-VP-SW1-12 consists of a 12" upper male Tele-Pole™, double swing arm, and 2.5" round base that contains the universal AMPs hole pattern. The Tele-Pole™ can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with a rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".
Features:
Hardware Included: Assembly Hardware
Hole Pattern: Tele-Pole: 2.625" x 2.625"/Round Plate: 4-Hole AMPS: 1.181" x 1.496" & 3-Hole 120-Degree: 1.812" Diameter
Plate Size: 2.5" Diameter
Ball Size: C Size (1.5")
Materials: Powder-coated steel/Marine-grade aluminum
Weight: 4.4 lbs
|
95.80 |
|
|
Tele-Pole™ with 12" & 18" Poles & 75mm VESA Mount
This RAM® Tele-Pole™ consists of an 18" lower pole, a 12" upper pole, a double swing arm, and a 75x75mm VESA Plate. The lower Tele-Pole™ will attach to all RAM® vehicle bases that do not contain a welded female Tele-Pole™. The combined height of the Tele-Poles™ can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices, allowing you to twist and tilt the viewing and operating angles of the connected device.
Features:
Pair this RAM® Tele-Pole™ with a RAM® vehicle base that does not contain a welded female Tele-Pole™
Easily adjust the height of the Tele-Poles™ with the turn of a knob, allowing you to twist and tilt the viewing and operating angles of your connected device
Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware - (4) 5/16"-18 x 1" Carriage Bolts, (4) 5/16"-18 Hex Nuts, (4) 5/16" Flat Washers, (4) 5/16" Split Lock Washers, and (4) Rubber Caps
Socket-to-Socket Length (inch): 6.88”
Hole Pattern (inch): Tele-Pole 2.625" x 2.625" / VESA Plate: 75 x 75mm VESA
Ball Size (inch): D Size (2.25")
Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs
Materials: Powder-coated steel and marine-grade aluminum
Weight: 9.73 lb.
|
164.96 |
|
|
8" Upper Pole with Double Swing Arms & 75 x 75mm VESA Plate
The RAM-VP-SW1-8-2461 consists of a 8" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole pattern. The Tele-Pole™can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". The 3.625" square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.
Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: Part number reflects product packaged in clear clam shell for store shelf display
|
100.09 |
|
|
RAM Double Swing Arm with 8" Male Tele-Pole™, 9" Female Tele-Pole™ & 2.5" Round Base (AMPs Hole Pattern)
Description
The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray.
The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball "C" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
109.96 |
|
|
Tele-Pole™ with 8" & 9" Poles & 75mm VESA Mount
This RAM® Tele-Pole™ consists of a 9" lower pole, an 8" upper pole, a double swing arm, and a 75x75mm VESA Plate. The lower Tele-Pole™ will attach to all RAM® vehicle bases that do not contain a welded female Tele-Pole™. The combined height of the Tele-Poles™ can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices, allowing you to twist and tilt the viewing and operating angles of the connected device.
Features:
Pair this RAM® Tele-Pole™ with a RAM® vehicle base that does not contain a welded female Tele-Pole™
Easily adjust the height of the Tele-Poles™ with the turn of a knob, allowing you to twist and tilt the viewing and operating angles of the connected device
Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware - (4) 5/16"-18 x 1" Carriage Bolts, (4) 5/16"-18 Hex Nuts, (4) 5/16" Flat Washers, (4) 5/16" Split Lock Washers, and (4) Rubber Caps
Socket-to-Socket Length (inch): 6.88”
Hole Pattern (inch): Tele-Pole 2.625" x 2.625" / VESA Plate: 75 x 75mm VESA
Ball Size (inch): D Size (2.25")
Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs
Materials: Powder-coated steel and marine-grade aluminum
Weight: 8.55 lb.
|
148.07 |
|
|
RAM 12" Long Double Swing Arm with Open Swivel Single Socket
The RAM-VB-110-4U consists of two 6" long single swing arms, Tele-Pole connection hole and swivel single socket that will accommodate 1.5" ball bases. The two swing arms connect with a bolt and knob system. With a simple turn of the knob you can pivot the swing arms at this center point and the tighten the knob to lock the arms in place. The swivel single socket arm allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. Easily incorporated into numerous RAM systems, this rotating swing arm is available with the standard 1.5 inch ball size or the heavy duty 2.25 inch ball size.
Swing Arm Length:
12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
59.90 |
|
|
RAM Double Swing Arm with 4" Male and No Female Tele-Pole
The RAM-VP-SW1-4, combination swing arm/tele-pole system, will connect to any RAM vehicle base with a welded female tele-pole, as well as RAM Framed Tough-Box Consoles. Included is a 4" tele-pole that can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray. The double swing arm mount includes a base & ball with pre-drilled holes, including the universal AMPS hole pattern; this accommodating most keyboards. The length of the double swing arm is 12".
Material:
Powder Coated Marine Grade Aluminum
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
88.50 |
|
|
RAM Double Swing Arm w/4" Male & No Female Tele-Pole
Swing Arm connects to a 75mm x 75mm VESA Plate.
|
97.74 |
|
|
RAM Double Swing Arm with 8" Male and No Female Tele-Pole
Material: Powder Coated Steel
Color: Black Powder Coat
|
95.93 |
|
|
RAM Double Swing Arm w/4" Male and No Female Tele-Pole
Swing Arm Connects to a Laptop Tray.
|
150.71 |
|
|
RAM Double Swing Arm w/8" Male & No Female Tele-Pole
Swing Arm connects to No Ball Base.
Material: Powder Coated Steel
Color: Black Powder Coat
|
79.80 |
|
|
RAM Double Swing Arm w/8" Male and No Female Tele-Pole
Swing Arm connects to 3.68" Diameter ball base.
|
101.44 |
|
|
RAM 12" Double Swing Arm with 2.5" Diameter Round Base
The RAM-VB-110-1U consists of a double swing arm with swivel socket arm and 2.5" diameter round base with the universal AMPS hole pattern. This mount allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM vehicle mount. Taking the highly successful RAM vehicle mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place.
Double Swing Arm Length: 12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
71.17 |
|
|
RAM Glare Shield Clamp Mount w/Short Double Socket Arm & Round Base Adapter w/AMPs Hole Pattern
The RAM-B-177-202U consists of a glare shield clamp base, short double socket arm and round base that contains the universal AMPs hole pattern. This mount is designed to mount to the lip edge of a flat surface up to 5/8" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diamter arm socket and connection plates to create the perfect mount for your application. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Mount will attach to flat surfaces with the following dimensions:
Min: 4.4mm / 0.17"
Max: 28.0mm / 1.12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
41.11 |
|