Stainless Steel Cleaner - 16oz Cleans and protects in one easy step. Non-streaking formula. Removes grease and stains. Easy spray-on, wipe-off. Leaves surface fingerprint resistant.

Stainless Steel Cleaner - 16oz *Case of 12* Cleans and protects in one easy step. Non-streaking formula. Removes grease and stains. Easy spray-on, wipe-off. Leaves surface fingerprint resistant.

16oz Stainless Steel Cleaner This is a phosphoric acid-based stainless steel cleaner.  Features: It removes rust staining and surface corrosion from polished marine-grade stainless steel  Shelf Life at 23 degrees Celsius is 24 months  Specifications: pH Value: 1.0 Size: 16oz bottle Contents: Contains non-ionic surfactants < 5%  Recommended Applications: A brush is recommended, but cotton, a rag, or a sponge may be used Recommended Use Used for cleaning rust staining and surface corrosion from polished marine-grade stainless steel. Surface Preparation Apply the product to the area to be treated. Allow it to work for up to 30 minutes. Rinse well with fresh water and a sponge. Pre-treatment Clean with detergent. Storage This product must be stored in accordance with national regulations. Keep the containers in a dry, cool, and well-ventilated space away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.

32oz Stainless Steel Cleaner This is a phosphoric acid-based stainless steel cleaner.  Features: It removes rust staining and surface corrosion from polished marine-grade stainless steel  Shelf Life at 23 degrees Celsius is 24 months  Specifications: pH Value: 1.0 Size: 32oz bottle Contents: Contains non-ionic surfactants < 5%  Recommended Applications: A brush is recommended, but cotton, a rag, or a sponge may be used Recommended Use Used for cleaning rust staining and surface corrosion from polished marine-grade stainless steel. Surface Preparation Apply the product to the area to be treated. Allow it to work for up to 30 minutes. Rinse well with fresh water and a sponge. Pre-treatment Clean with detergent. Storage This product must be stored in accordance with national regulations. Keep the containers in a dry, cool, and well-ventilated space away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.

Large Stainless Steel Bolt-less Rod Holder - 0° 2020 IBEX Innovation Award Winner.  This patent-pending rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing.  Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever! Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finish These larger diameter rod holders are available at 0° 15° & 30° angles.  To be used with the Large Stainless Steel Backing Plates 10-1476-40. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Large Stainless Steel Bolt-less Rod Holder - 15° 2020 IBEX Innovation Award Winner.  This patent-pending rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing.  Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever! Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finish These larger diameter rod holders are available at 0° 15° & 30° angles.  To be used with the Large Stainless Steel Backing Plates 10-1476-40. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Large Stainless Steel Bolt-less Rod Holder - 30° 2020 IBEX Innovation Award Winner.  This patent-pending rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing.  Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever! Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finish These larger diameter rod holders are available at 0° 15° & 30° angles.  To be used with the Large Stainless Steel Backing Plates 10-1476-40. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Large Stainless Steel Bolt-less Swivel Rod Holder - 0° 2020 IBEX Innovation Award Winner.  This patent-pending SWIVEL rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole.  This is the last rod holder you will need on your boat...ever! Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.  These larger diameter rod holders are available at 0° 15° & 30° angles.  To be used with the Large Stainless Steel Backing Plates 10-1476-40 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Large Stainless Steel Bolt-less Swivel Rod Holder - 15° 2020 IBEX Innovation Award Winner.  This patent-pending SWIVEL rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole.  This is the last rod holder you will need on your boat...ever! Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.  These larger diameter rod holders are available at 0° 15° & 30° angles.  To be used with the Large Stainless Steel Backing Plates 10-1476-40 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Large Stainless Steel Bolt-less Swivel Rod Holder - 30° 2020 IBEX Innovation Award Winner.  This patent-pending SWIVEL rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole.  This is the last rod holder you will need on your boat...ever! Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.  These larger diameter rod holders are available at 0° 15° & 30° angles.  To be used with the Large Stainless Steel Backing Plates 10-1476-40 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SC80 Satcom Mount - Stainless Steel Manufactured from marine grade Stainless Steel. Your chosen antenna will attach through external fixings and pre-drilled mounting holes, making installation and maintenance easy to perform. Compatible Units: JRC - JUE-501 Fleetbroadband KVH - Fleet BB 500 / V7, V7IP(M9 matching dome), TracPhone V7-HTS, TracVision G8, M9, TV8 Features: Reduces the overall footprint of the Satcom antenna  Mirror polished for a hi-end finish Satcom mounting hardware is hidden internally Watertight installation  Technical Specifications: Material - Stainless Steel Height - 3.14" (80mm) Mounting Type - Vertical In the Box: Mount Mount seal Mounting hardware (excluding screws/bolts)  Instruction manual  *Sold as an Individual

Aluminum Cleaner - 16oz Brightens, polishes and protects aluminum such as pontoons, hulls and hardware. Low micron cleaner and anti-oxidant.

Aluminum Cleaner - 16oz *Case of 12* Brightens, polishes and protects aluminum such as pontoons, hulls and hardware. Low micron cleaner and anti-oxidant.

Life-Calk Solvent & Cleaner - 16oz Cleans surfaces prior to caulking with Life-Calk, Life Seal, silicone or Teak Deck Sealant. Safe for fiberglass. Removes uncured polysulfide sealant and grease from tools and equipment. Acetone free formula.

Life-Calk Solvent & Cleaner - 16oz *Case of 12* Cleans surfaces prior to caulking with Life-Calk, Life Seal, silicone or Teak Deck Sealant. Safe for fiberglass. Removes uncured polysulfide sealant and grease from tools and equipment. Acetone free formula.