8" Upper Pole with Double Swing Arms & 75 x 75mm VESA Plate The RAM-VP-SW1-8-2461 consists of a 8" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole pattern. The Tele-Pole™can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". The 3.625" square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: Part number reflects product packaged in clear clam shell for store shelf display

Tele-Pole™ with 8" & 9" Poles & 75mm VESA Mount This RAM® Tele-Pole™ consists of a 9" lower pole, an 8" upper pole, a double swing arm, and a 75x75mm VESA Plate. The lower Tele-Pole™ will attach to all RAM® vehicle bases that do not contain a welded female Tele-Pole™. The combined height of the Tele-Poles™ can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices, allowing you to twist and tilt the viewing and operating angles of the connected device. Features: Pair this RAM® Tele-Pole™ with a RAM® vehicle base that does not contain a welded female Tele-Pole™ Easily adjust the height of the Tele-Poles™ with the turn of a knob, allowing you to twist and tilt the viewing and operating angles of the connected device Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware - (4) 5/16"-18 x 1" Carriage Bolts, (4) 5/16"-18 Hex Nuts, (4) 5/16" Flat Washers, (4) 5/16" Split Lock Washers, and (4) Rubber Caps Socket-to-Socket Length (inch): 6.88” Hole Pattern (inch): Tele-Pole 2.625" x 2.625" / VESA Plate: 75 x 75mm VESA Ball Size (inch): D Size (2.25") Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs Materials: Powder-coated steel and marine-grade aluminum Weight: 8.55 lb.

Tele-Pole™ with 12" & 18" Poles & 75mm VESA Mount This RAM® Tele-Pole™ consists of an 18" lower pole, a 12" upper pole, a double swing arm, and a 75x75mm VESA Plate. The lower Tele-Pole™ will attach to all RAM® vehicle bases that do not contain a welded female Tele-Pole™. The combined height of the Tele-Poles™ can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices, allowing you to twist and tilt the viewing and operating angles of the connected device. Features: Pair this RAM® Tele-Pole™ with a RAM® vehicle base that does not contain a welded female Tele-Pole™ Easily adjust the height of the Tele-Poles™ with the turn of a knob, allowing you to twist and tilt the viewing and operating angles of your connected device Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware - (4) 5/16"-18 x 1" Carriage Bolts, (4) 5/16"-18 Hex Nuts, (4) 5/16" Flat Washers, (4) 5/16" Split Lock Washers, and (4) Rubber Caps Socket-to-Socket Length (inch): 6.88” Hole Pattern (inch): Tele-Pole 2.625" x 2.625" / VESA Plate: 75 x 75mm VESA Ball Size (inch): D Size (2.25") Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs Materials: Powder-coated steel and marine-grade aluminum Weight: 9.73 lb.

RAM® 12" Upper Pole with Double Swing Arms & Round Plate The RAM-VP-SW1-12 consists of a 12" upper male Tele-Pole™, double swing arm, and 2.5" round base that contains the universal AMPs hole pattern. The Tele-Pole™ can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with a rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".   Features: Hardware Included: Assembly Hardware Hole Pattern: Tele-Pole: 2.625" x 2.625"/Round Plate: 4-Hole AMPS: 1.181" x 1.496" & 3-Hole 120-Degree: 1.812" Diameter  Plate Size: 2.5" Diameter Ball Size: C Size (1.5") Materials: Powder-coated steel/Marine-grade aluminum Weight: 4.4 lbs

8" Upper Flange Pole with D Size 75x75mm VESA Mount This 8" Upper Flange Pole consists of an 8" upper pole, a D-size ball base, a medium-length double socket arm, and a D-size 75x75mm VESA Mount to connect with your device holder. Pair this upper pole with a RAM® vehicle base that is compatible with a specific vehicle for a rugged mobile office setup. Features: Pair this 8" upper pole with any RAM® lower pole and vehicle base that are compatible with your specific vehicle Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware Socket-to-Socket Length (inch): 6.88” Hole Pattern (inch): 75 x 75mm VESA Ball Size (inch): D Size (2.25") Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs Materials: Powder-coated steel and marine-grade aluminum Weight: 6.7 lb.

Universal Backing Plate Mount with 75x75mm VESA Plate The mount consists of a double socket arm with one 2.5" diameter round base and one 75mm x 75mm VESA plate, as well as one backer plate. This mount is extremely adjustable and makes a great choice for anyone interested in mounting a device with a VESA hole pattern to a flat surface that can be drilled into. Specifications: Hardware Included: (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Product Dimensions (inch): Overall Height: 7.35" Socket to Socket Length (inch): 4.66” Hole Pattern: 75 x 75mm VESA Plate Size (inch): 3.625" x 3.625" Ball Size (inch): C size (1.5”) Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs. Materials: Marine-grade aluminum Weight: 1.59 lb.

Tough-Claw™ Base w/Double Socket Arm & Diamond Base Adapter The RAP-B-400-238U consists of the small Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" Specifications/Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime Warranty! Made in U.S.A. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.35 lbs.

RAM Double Swing Arm w/4" Male & No Female Tele-Pole Swing Arm connects to a 75mm x 75mm VESA Plate.

12" Upper Flange Pole with D Size 75x75mm VESA Mount This 12" Upper Flange Pole consists of a 12" upper pole, a D-size ball base, a medium-length double socket arm, and a D-size 75x75mm VESA Mount to connect with your device holder. Pair this upper pole with a RAM® vehicle base that is compatible with the specific vehicle, enabling a rugged mobile office setup. Features: Pair this 12" upper pole with any RAM® lower pole and vehicle base that are compatible with your specific vehicle Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware Socket-to-Socket Length (inch): 6.88” Hole Pattern (inch): 75 x 75mm VESA Ball Size (inch): D Size (2.25") Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs Materials: Powder-coated steel and marine-grade aluminum Weight: 7.49 lb.

RAM (Left hand Orientation) Universal No-Drill™ RAM Pod HD Vehicle Mount w/ Double Socket Arm & 3.625" Square Base (Vesa 75mm x 75mm Hole Pattern) Blending the best of versatility, strength and installation ease; the RAM ToughPod HD™ is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM ToughPod HD is an ideal solution for mounting tablets, small laptops and other similar devices. Requiring minimal space in the vehicle cab, it can be remove quickly without the use of tools. The versatility of the RAM ToughPod HD makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types and other applications which require a robust mounting platform for your tablet. Low Profile, Low Cost and Extremely Robust: - The minimalist design offers a low profile form factor while offering an extremely robust mounting platform - Ideal mounting solution for fleet and service vehicle fleets with a varying range of vehicles. Stands up to the demands of field applications Highly Versatile: - Angle adjustment feature to compensate for varying floorboard angles - Can be used as a horizontal or vertical flat surface drill-down mount - Solid steel post can be cut to size in order to accommodate varying vehicle configurations Easy to Install and Remove: - Works on most vehicles. Fast and simple installation, requires no drilling or modification to your vehicle - Attaches using an existing seat rail bolt or seat track - Remove the upper portion of the mount with the turn of one knob, creating valuable space in the cab when the mount is not in use Pole Length: 12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

RAM® Tilt-N-Turn™ 90-Degree Bracket with Single Swing Arm The RAM-VB-TNT90-1, Tilt-N-Turn™ 90 degree motion attachment swing arm, consists of a steel plate on a single swing arm that has a tilt range of 90 degrees forward and back from the vertical position. The small range of tilt is designed to angle a connected RAM laptop cradle forward giving you a comfortable typing and viewing angle. The Tilt-N-Turn™ plate can spin in 360 degrees around on the swing arm end, and with a twist of the side lock knob, the attachment will tilt forward and back. Knowing that this product has countless applications, numerous hole patterns are built right in making the Tilt-N-Turn™ exceptionally versatile. The AMPS, 90 degree AMPS, 75 x 75MM VESA, 2” x 4”, and RAM’s own three hole at 120 degrees take the guess work out of whether this product will work for you. Whether you have and existing RAM system and want to integrate this product, or simply need the best mounting system available, consider RAM and yet another ergonomic product; this time with the Tilt-and-Turn™ feature.  Hardware Included: (1) 3/8"-16 x 1.5" Carriage Bolt (1) 3/8"-18 Lock Nut (1) 2" Rubber Washer (2) 5/16" Flat Washer Materials:  Powder coated steel Marine grade-aluminum

RAM 8" Long Top Male Tele-Pole The RAM upper Tele-Pole, 8" male pole, contains a swing arm connection point that will attach directly to any double swing arm system with 1.5" Socket. The male post is 8" long and has a diameter of 1.328". Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag.

RAM 11mm Flat Base with Double Socket Arm and Diamond Adaptor (U) The RAM-B-179U, offset motorcycle base, makes attaching to a variety of mounting locations, including handlebars, a breeze. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your mobile electronic device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. With a turn of a single comfortable to grasp knob, adjustments can be made and the sleek hourglass shape of the arm assembly compliments the lines of any motorcycle. The RAM-B-252U, base for the RAM-B-179U, consists of a 1" diameter ball and 2.25" x 0.875 base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick). Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 9mm Angled Base with Double Socket Arm and Diamond Adaptor (U) The RAM-B-180U, offset motorcycle base, makes attaching to a variety of mounting locations, including handlebars, a breeze. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your mobile electronic device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. With a turn of a single comfortable to grasp knob, adjustments can be made and the sleek hourglass shape of the arm assembly compliments the lines of any motorcycle. The RAM-B-272U, base for the RAM-B-180U, consists of a 1" diameter ball and base with 9mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-272U is BMW. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Small Tough-Claw™ Base with Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle The RAM-B-400-UN7 consists of the Tough-Claw™ rail clamp base, STANDARD length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Features: Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25"), Maximum Width = 3.25" (Minimum Height = 2.25"), Depth = 0.875" Rustproof High strength composite and stainless steel construction Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments Lifetime warranty Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in clear clam shell for store shelf display. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 0.95 lbs.