|
Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with C Size 1.5" Ball
The RAM® Torque™ handlebar and rail mounting base has a 1.5” rubber ball and accommodates bars 3/4” to 1” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments.
Mounting Base Dimensions:
Accommodates rails 0.75" to 1" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball "C" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
22.90 |
|
|
Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball
The RAM® Torque™ handlebar and rail mounting base has a 1" rubber
ball and accommodates bars 3/4" to 1" in diameter. Sizing inserts are
included to provide a snug fit and protection of the rail. The mount
utilizes nylon-insert locknuts to prevent loosening in high vibration
environments.
Mounting Base Dimensions:
Accommodates rails 3/4" to 1" in diameter
Specs & Features
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag
Weight: 0.32lbs
|
20.78 |
|
|
Torque™ 1-1/2" - 2" Diameter Rail Base with 1.5" Pin-Lock™ Ball
The RAM® Torque™ rail mounting base securely attaches to bars 1.5" to 2" in diameter. The double-sided Pin-Lock™ rail base and ball allows for the connection of up to two devices and is ideal for securing small electronics, spotlights, cameras, or cup holders to ATVs, UTVs, off-road vehicles and heavy equipment rail bars. Sizing inserts are included to provide a snug fit and protection of the rail, and the mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments.
Available separately, the RAM B Size Ball Add-On allows you to attach an additional B Size Ball to the Torque™ Rail Base for mounting multiple devices.
Material:
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
1.5" Rubber Ball "C" Size
Note:
Part number reflects product packaged in a poly bag.
|
38.51 |
|
|
RAM Rail Clamp Base with 1.5" Ball
The RAM-271U-12 is a round pipe base that connects to a pipe with a diameter from 1.25" to 1.875".
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
37.67 |
|
|
Torque™ 1-1/2" - 2" Diameter Rail Base with 1" Ball
The RAM Torque™ Rail Base accommodates rails and bars ranging from 1.5” to 2” in diameter – the perfect mounting solution for your ATV or UTV. The include B size hex ball adapter can connect to either side of the Torque base, and is suitable for rugged environments for supporting action cameras, spotlights or other devices. Two sizing inserts – one for attachment to 1.5” rails and the other for attachment to 1.75” rails – are included to create a tight hold while nylon-insert locknuts prevent loosening in high-vibration environments.
Available separately, the RAM B Size Ball Add-On allows you to attach an additional B Size Ball to the Torque™ Rail Base for mounting multiple devices.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in a poly bag.
|
35.40 |
|
|
Torque™ 1-1/2" - 2" Diameter Rail Base with 1" Pin-Lock™ Ball
The RAM® Torque™ rail mounting base securely attaches to bars 1.5” to 2” in diameter. The double-sided Pin-Lock™ rail base and ball allows for the connection of up to two devices and is ideal for securing small electronics, spotlights, cameras, or cup holders to ATVs, UTVs, off-road vehicles and heavy equipment rail bars. Sizing inserts are included to provide a snug fit and protection of the rail, and the mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments.
Available separately, the RAM B Size Ball Add-On allows you to attach an additional B Size Ball to the Torque™ Rail Base for mounting multiple devices.
Material:
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in a poly bag.
|
34.66 |
|
|
Composite 3.25" Diameter Suction Cup Base w/1" Ball
The RAP-B-224-1U, composite twist lock mount consists of a 3.25" rubber base that is connected to the (RAP-B-238U), diamond base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.
Features:
Material: High Strength Composite
Ball Size: 1" Rubber Ball "B" Size
|
15.85 |
|
|
Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball
The RAM® Torque™ handlebar and rail mounting base has a 1" rubber ball and accommodates bars 3/8" to 5/8" in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments.
Allows for mounting to scooter mirror rails as well as vehicle headrests and other round rails within the stated dimensions.
Mounting Base Dimensions:
Accommodates rails 3/8" to 5/8" in diameter
Specs & Features
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag
Weight: 0.21lbs
|
20.33 |
|
|
RAM Pin-Lock™ Security Kit and 2.25" Diameter Ball SHORT Mount with 11" X 3" Rectangle Plate
The RAM-S-D-111U-C consists of a 3.68" diameter round base, SHORT LENGTH double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock™ security nut and key knob. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
RAM® Pin-Lock™ security solutions are designed to withstand the harshest environments where RAM® Mounts are commonly used. With an emphasis on aesthetics and function, RAM® security nuts/knobs are low profile and only add a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price.
Features
Overall Height:
8.125"
Weight Capacity:
Up to 15 lbs
Material:
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
2.25" Rubber "D" Ball Size
Note:
The 11" x 3" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
120.92 |
|
|
RAM® Double Ball Mount with 1/4"-20 Male Thread - Short Arm
The RAM-B-101AU consists of a double socket arm, one 2.5" diameter round base with the universal AMPS hole pattern and universal camera/camcorder base. The universal camera/camcorder base consists of a 1" diameter rubber ball connected to a 2.5" diameter round base with 1/4-20 camera thread. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.
Hole Pattern:
4-Hole AMPS: 1.181" x 1.496"
3-Hole 120-Degree: 1.812" Diameter
Features:
Ball/Socket Size: B Size - 1"
Materials: Marine-grade aluminum
Plate Size: 2.5" Diameter
Socket to Socket Length: 3"
Product Dimensions: Overall Height: 5"
|
49.10 |
|
|
RAM Double Swing Arm w/8" Male & No Female Tele-Pole
Swing Arm connects to No Ball Base.
Material: Powder Coated Steel
Color: Black Powder Coat
|
79.80 |
|
|
RAM-A-CAN™ II Universal Cup Holder Base
The RAP-299-3U serves as a mounting point for RAM 1" double socket ball mounts. Included are support fins that flex, making the cup holder base conform to most vehicle cup holders. Also included is hardware to attach a RAM diamond base to the cup holder base.
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
25.30 |
|
|
RAM 2-7/16" X 1-5/16" Base w/Ball
Part #: RAM-238U
The powder coated marine grade aluminum base contains a 1.5" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
11.88 |
|
|
Universal No-Drill RAM Pod HD Vehicle Mount w/Double Socket Arm & 2.5" Round Base (AMPS Hole Pattern)
Pole Length:
12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
161.29 |
|
|
RAM® Torque™ 1 1/8" - 1 1/2" Diameter Handlebar/Rail Base with B Size 1" Ball, Short Arm and Diamond Plate
The RAM® Torque™ handlebar and rail mounting base has a 1” rubber ball and accommodates bars 1 1/8” to 1 1/2” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Included is a short double socket arm and a diamond plate for mounting to RAM mounting cradles.
Mounting Base Dimensions:
Accommodates rails 1 1/8” to 1 1/2” in diameter
|
37.26 |
|