|
RAM-ROD™ Rod Holder with Spline Post, Extension Arm and Track Base
This track mounting solution includes the high strength composite RAM-ROD™ fishing rod holder and is compatible with the RAM Tough-Track™. An excellent addition to the left side of your boat, the Track Base is designed to not loosen while trolling. With the Ratchet Attachment and Extension Arm, you’ll have plenty of room to take advantage of the RAM-ROD’s tilting cradle and ability to rotate 360°.
Features:
Material: High Strength Composite
T-Bolt Dimensions: .48" x .95"
Note: Part number reflects product packaged in retail bag for store shelf display.
|
34.50 |
|
|
RAM-ROD® 2007 Fly Rod Jr. Fishing Rod Holder with Track Ball™ Base
The RAM-ROD® 2007 Fly Rod Jr. holder is one of the most popular rod holders for the kayak angler due to its simplicity and adjust-ability. Utilizing the unique ball and socket technology, you can rotate and adjust the rod holder almost infinitely making this rod holder ideal for kayak fishing. This rod holder is designed for use with fly rods and reels. Includes a Track Ball™ for connecting to virtually any track system including the RAM Tough-Track™.
Specs & Features
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
Part number reflects product packaged in a poly bag.
|
24.07 |
|
|
RAM Tough-Tube Fishing Rod Holder w/3" Length Spline Post & Flush Mounting Base
The RAP-394-SSF consists of the TOUGH-TUBE fishing rod holder, 3" long ratchet spline post arm and square flush mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The flush mounting base contains 4 pre-drilled holes and a female socket for spline post arms. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water.
Features:
Quick release and installation
High strength materials ensure product longevity
Compatible with all RAM & 3rd party post spline bases
Compatible with spinning reels and level wind reels
Ratchet system allows for multiple articulation points
Lanyard tie points for extra security
Custom designed for heavy chop environments
Mount virtually anywhere on heavy rigged kayaks without hinderance
Lifetime warranty
Made in U.S.A.
Dimensions:
Inner diameter: 1.9"
Inner tube length: 10" (from bottom to top of lip)
Post Spline Length: 3"
Material:
High Strength Composite
Notes:
Part number reflects product packaged in clear clam shell for store shelf display.
|
23.76 |
|
|
U-Bolt ATV UTV Strap with Double Socket Arm and 1/4-20 Mounting Bolt Base
Part #: RAM-B-149Z-2-202A
RAM Rail ATV/UTV Mount for Cameras
Color:
Black Powder Coat
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball
|
46.54 |
|
|
RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.68" Round Base
The RAM-316-3-240U consists of the RAM POD III No-Drill vehicle base, three rigid aluminum rod legs, double socket arm, 2.5" round bases that contain the universal AMPs hole pattern and 3.68" round base. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The 3.68" round base contains pre-drilled holes that connect to RAM Tough-Dock Powered Docking Stations.
Leg Lengths:
18", 20" and 30"
Installation Instructions:
At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
140.52 |
|
|
Small Tough-Claw™ Base w/Short Double Socket Arm and Universal X-Grip® Cell/iPhone Cradle
The RAM-B-400-A-HOL-UN7BU consists of the Tough-Claw™ rail clamp base, SHORT length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Cradle Dimensions
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Features:
Rustproof
High strength composite and stainless steel construction
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Socket technology allows for multiple adjustment angles and articulation of device
Includes Tether for open cockpit and extreme environments
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
|
66.07 |
|
|
Triple Threat Three Pole Rod Holder - White
The Triple Threat™ Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. This three-pole, side-mount rod holders come equipped with a built-in knife and plier storage with holders that can accommodate up to 16 different fishing lures. Constructed of one-piece injection molded, UV stabilized, polypropylene construction. No assembly is required. This is a fisherman’s dream and is a must-have for any boat, kayak, or dock!
Features:
Accessory Track Mounting System™
Scent bottle storage
Four leashes and two bungee cord attachment points
Built-in knife and plier holder
Can accommodate up to 16 different fishing lures
Accommodates rods up to 1-3/4 inch in diameter
Installs with four #8 fasteners (included in the display-packed product)
Specifications:
Color: White
Length (inch): 13-1/2”
Height (inch): 10-3/4”
Distance Between Screw Holes Horizontally (inch): 7”
Distance Between Screw Holes Vertically (inch): 4-1/2”
|
15.20 |
|
|
Triple Threat Three Pole Rod Holder - Black
The Triple Threat™ Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. This three-pole, side-mount rod holders come equipped with a built-in knife and plier storage with holders that can accommodate up to 16 different fishing lures. Constructed of one-piece injection molded, UV stabilized, polypropylene construction. No assembly is required. This is a fisherman’s dream and is a must-have for any boat, kayak, or dock!
Features:
Accessory Track Mounting System™
Scent bottle storage
Four leashes and two bungee cord attachment points
Built-in knife and plier holder
Can accommodate up to 16 different fishing lures
Accommodates rods up to 1-3/4 inch in diameter
Installs with four #8 fasteners (included in display-packed product)
Specifications:
Color: Black
Length (inch): 13-1/2”
Height (inch): 10-3/4”
Distance Between Screw Holes Horizontally (inch): 7”
Distance Between Screw Holes Vertically (inch): 4-1/2”
|
15.20 |
|
|
Triple Threat Three Pole Rod Holder - Flat Dark Earth
The Triple Threat™ Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. This three-pole, side-mount rod holders come equipped with a built-in knife and plier storage with holders that can accommodate up to 16 different fishing lures. Constructed of one-piece injection molded, UV stabilized, polypropylene construction. No assembly is required. This is a fisherman’s dream and is a must-have for any boat, kayak, or dock!
Features:
Accessory Track Mounting System™
Scent bottle storage
Four leashes and two bungee cord attachment points
Built-in knife and plier holder
Can accommodate up to 16 different fishing lures
Accommodates rods up to 1-3/4 inch in diameter
Installs with four #8 fasteners (included in display-packed product)
Specifications:
Color: Flat dark earth
Length (inch): 13-1/2”
Height (inch): 10-3/4”
Distance Between Screw Holes Horizontally (inch): 7”
Distance Between Screw Holes Vertically (inch): 4-1/2”
|
15.37 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
RAM-TUBE 2000 Holder w/RAM-ROD Revolution Ratchet/Socket System & 5 Spot Mounting Base Adapter
Material: High Strength Composite
Color: Black
|
34.75 |
|
|
RAM-ROD® 2000 Fishing Rod Holder with RAM-ROD® Revolution Ratchet/Socket System and Track Ball™Base
The RAM-114-RB-TRA1U consists of the RAM-ROD® 2000 fishing rod holder, ratchet arm with single open socket and 1.5" Track Ball™ base for any track system including the RAM Tough-Track™. The unique ball and socket with ratcheting feature allows for 360-degree rotation of the rod holder for optimal angle adjustments while on the water.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag
|
32.27 |
|
|
RAM Tube 2008 Fishing Rod Holder - No Ball
Part #: RAP-119NB
Color: Black
Material: High Strength Composite
Ball Size: 1.5" Rubber Ball
|
14.40 |
|
|
RAM 2" x 1.7" Base w/AMPs Hole Pattern
The powder coated marine grade aluminum base consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, making the universal AMPs hole pattern.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
11.59 |
|
|
2.5" Composite Round Base w/AMPS Hole Pattern & 1.5" Ball
The RAP-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
9.56 |
|