Track Base f/Spline Posts The RAM Track Base for Spline Posts is a rugged track mount solution that’s also ideally suited for use when you’re out on the water. If you’re using the Track Base to mount a rod holder while trolling, it’s a great choice as the Track Base won’t loosen. Compatible with the RAM Tough-Track™, it features two knobs and a hole that allows for the attachment of any RAM Spline Post.  Features: T-Bolt Dimensions: .48" x .95" Material: High Strength Composite   Note: Part number reflects product packaged in retail bag for store shelf display.

RAM-ROD™ Flush Base f/ Spline Posts Description: The RAM-114FMU contains 4 pre-drilled holes and a socket compatible with RAM-ROD™ and RAM-TUBE™ holders with a spline post. Color: Black Material: High Strength Plastic

RAM-ROD™ Rod Holder with Spline Post, Extension Arm and Track Base This track mounting solution includes the high strength composite RAM-ROD™ fishing rod holder and is compatible with the RAM Tough-Track™. An excellent addition to the left side of your boat, the Track Base is designed to not loosen while trolling. With the Ratchet Attachment and Extension Arm, you’ll have plenty of room to take advantage of the RAM-ROD’s tilting cradle and ability to rotate 360°.  Features: Material: High Strength Composite    T-Bolt Dimensions: .48" x .95" Note: Part number reflects product packaged in retail bag for store shelf display.

RAM ROD® Round Flush Base for Spline Posts Features: The RAM-114FMTU consists of a round flush mounting base and a socket compatible with RAM ROD® and RAM-TUBE™ holders with a spline post. Designed to accommodate gunwales up to two inches thick, and seat with no visible hardware, this product is ideally suited to a wide variety of applications. This mounting base is ideal for kayaks and water craft with limited mounting space. Includes a rubber cap for sealing from water when not in use, the included nylon threaded cap seals the bottom.

RAM-ROD™ Bulkhead Vertical Base f/ Spline Posts The RAM-114BMU contains 4 pre-drilled holes and a socket compatible with RAM-RODT and RAM-TUBET holders with a spline post. Material: High Strength Composite

RAM® Tube Jr.™ Holder with Universal Adapt-A-Post™ Track Base - 6" Post  The RAM® Universal Adapt-A-Post™ with RAM® Tube Jr.™ and 6" Spline Post combines both the revolutionary RAM® Universal Adapt-A-Post™ Track Base and the RAM® Tube Jr.™ with 6" spline post. The RAM® Universal Adapt-A-Post™ is compatible across the post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops. This version of the RAM® Universal Adapt-A-Post™ is a track base compatible with RAM® Tough-Track™ as well as most third-party track systems. Each RAM® Universal Adapt-A-Post™ features a quick-release button to safely disengage the rod holder as well as keep it secure while fishing out on the water. The RAM® Universal Adapt-A-Post™ Base also contains a locking lever used to prevent the base from spinning loose with any rod holder movement. Conversely, you can adjust the position of the base along the track by lifting the lever, loosening the base, and repositioning without loosening the rod holder. RAM® Tube Jr.™ supports right and left-handed handling. Features: Universal post and spline base compatible with post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops Includes RAM® Tube Jr.™ rod holder with 6" spline post; track base is compatible with all versions of RAM® Tough-Track™ and most third-party tracks The locking button prevents the base from spinning loose with rod holder movement Quick-release mechanism for easy installation and removal of rod holder Backed by a lifetime warranty Specifications: T Bolt Dimensions: .48" x .95" Post Length: 6" Materials: High-strength composite Packaging Type: Poly Bag Weight: 1.02lbs

RAM-ROD™ Deck and Track Flat Surface Base w/ Spline Posts The RAM-114DTMU deck and track flat surface base includes a socket compatible with RAM-RODT and RAM-TUBET holders with a spline post. The RAM-114DTMU is designed to attach to Tite-Lok track systems with a 3.25" width. Color: Black Material: High Strength Plastic

RAM-ROD Combination Bulkhead/Flat Surface Base with Plunger for Spline Posts The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. Compatible with RAM post and spline rod holders and RAM wedge mount ball adapters. Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM Tube Jr. Fishing Rod Holder with Short 4" Length Post Spline & Flush Mounting Base Before you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Base Description: The flush mounting base contains 4 pre-drilled holes and a socket compatible with RAM-ROD and RAM-TUBE holders with a spline post. Post Spline Length: 4" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM Tube Jr. Fishing Rod Holder with Standard 6" Length Post Spline & Flush Mounting Base Before you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Base Description: The flush mounting base contains 4 pre-drilled holes and a socket compatible with RAM-ROD and RAM-TUBE holders with a spline post. Post Spline Length: 6" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

Track Ball™ Mount for iPad Pro 11" (1st - 4th Gen) & Air 4/5 This RAM® iPad Track Mount (RAM-HOL-AP23-354-TRA1U) is made up of a C-size 1.5" ball molded to a high-strength composite base, a rubber friction washer, and a stainless steel T-bolt for sliding into any third-party track system or the RAM® Tough-Track™ line of tracks. Simply insert or slide the Track Ball™ into the track and twist the ball clockwise to tighten it in place. Twist counterclockwise to loosen or adjust the ball. Included in this kit are a C-sized medium-length socket arm and a form-fit cradle for the iPad Pro 11" (1st-4th Gen), Air 4 & 5, providing a perfect fit for the iPad without a case. Features: 1.5" C-size RAM® ball with adjustable T-bolt and friction washer designed for track mounting systems including the RAM® Tough-Track™ and other third-party track systems; simply insert into the track and twist the ball clockwise to tighten Includes a C-sized medium-length socket arm and form-fit cradle for the iPad Pro 11" (1st-4th Gen), Air 4 & 5 providing a perfect fit for the iPad without a case Backed by a lifetime warranty Specifications: Hardware Included: Assembly hardware T Bolt Dimensions: .48” x .95” Suction Size (inch) 3.3” diameter  Socket to Socket Length (inch): 4.66” Ball Size (inch): C size (1.5”) Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs. Materials: Marine-grade aluminum and high-strength composite Weight: 1.58 lb. Compatible Devices: iPad Air 4, iPad Air 5, iPad Pro 11", iPad Pro 11" (2020)*, iPad Pro 11" (2021)*, and iPad Pro 11" (2022)*

Track Ball™ Mount with Marine Electronic Plate for Lowrance Elite-4, Hook-4 & Mark-4 Series Fishfinders The RAP-B-202-LO11-354-TRA1U consists of a Track Ball™ base, composite double socket arm and adapter base that inserts directly to the back of Lowrance Elite-4, Mark-4 and Hook 4 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. A key feature of the mount is a 1" diameter rubber ball and socket system with adjustment points at both socket ends of the arm. Combined with RAM's rubber ball and socket technology, this allows for high adjustibility to achieve perfect viewing angles. Compatible with virtually any track system including the RAM Tough-Track™. Specs & Features Material: High Strength Composite Overall Length: 5" Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in a poly bag.

Track Ball™ Mount with 1/4"-20 Threaded Adapter for Action Cameras The RAP-B-366-153-354-TRA1 consists of a Track Ball™ base, composite double socket arm, and a 1" ball connected to a round plate with 1/4"-20 camera thread. This steel camera thread will connect to any standard female thread found on camcorders, digital cameras and POV cameras. This kit is compatible with virtually any track system including the RAM Tough-Track™.  Features: 1. Unique rubber ball design dampens shock and vibration helping to extend the life of your camera 2. 1/4"-20 male threaded stud will connect to most female threads found on POV cameras 3. High strength materials ensure product longevity 4. Compatible with the RAM Tough-Track™ 5. Double ball and socket mount offers infinite adjustment angles Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in a poly bag.

Track Ball™ Action Camera Mount The RAP-B-202-GOP1-354-TRA1U consists of a Track Ball™ base, double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter rubber ball and socket system that has adjustment points at both ends of the double socket arm - allowing for high adjustibility to achieve perfect viewing angles. The GoPro® Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. This kit is compatible with virtually any track system including the RAM Tough-Track™.  Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in a poly bag. GoPro camera and black thumb screw not included with purchase.

X-Grip® Dashboard Mount with Backing Plate for 9"-10" Tablets The RAM® X-Grip® universal holder for 9"-10" tablets features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Included are easy-access grip knobs located on the back of the holder for quick release of your tablet. No matter what double socket arm and mounting base you pair the RAM® X-Grip® with, RAM® ball and socket technology allow for near-infinite adjustability to achieve the ideal viewing angle while also extending the life of your tablet by providing shock and vibration damping. The RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allow for almost infinite adjustment and perfect viewing angles. Features: Spring-loaded 'X' design with rubber caps sports great holding power without obstructing your tablet; fits most 9 in. -10 in. tablets Drill-down mounting solution; choose either round plate featuring the AMPS hole pattern for attachment to compatible device holders 2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases Made of high-strength composite and steel components for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Holder Dimensions (inch): Max Height: 10.25" (using optional supports), Width Range: 6.25" - 8.1", and Max Depth: .875" Socket to Socket Length (inch): 2.5” Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Plate Size (inch): 2.5" Diameter Ball Size (inch): C size (1.5”) Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs. Materials: Marine-grade aluminum and high-strength composite Weight: 2.42 lb. Compatible Devices: Amazon: Fire HD 10 Apple: iPad (1st Generation), iPad (3rd Generation), iPad (4th Generation), iPad (5th Generation), iPad (6th Generation), iPad (7th Generation), iPad (8th Generation), iPad (9th Generation), iPad (10th Generation), iPad 2, iPad 9.7 (2017), iPad 9.7 (2018), iPad Air, iPad Air 2, iPad Air 3, iPad Air 4, iPad Air 5, iPad Pro 9.7 (1st Generation), iPad Pro 10.5 (2nd Generation), iPad Pro 11", iPad Pro 11" (2020), iPad Pro 11" (2021), and iPad Pro 11" (2022) ASUS: MeMO Pad FHD 10, Transformer Pad, ZenPad 10, ZenPad 3S 10, and ZenPad Z10 Dell: Venue 10 7000, Venue 11 Pro, and Venue 11 Pro 7000 Google: Nexus 10 and Pixel C HP: ElitePad 900, ElitePad 900 G1, Pro 610, and Pro Slate 10.1 Huawei: MediaPad M2 10.0, MediaPad M3 Lite 10.0, and MediaPad T3 10 Lenovo: Miix 3, Tab P12 Pro, S6000, Tab 2 A10-70, Tab 4 10, Tab 4 10 Plus, Tab A10, Tab3 10 Business, ThinkPad 10, ThinkPad Tablet 2, Yoga Book, Yoga Tab 3 10, Yoga Tab 3 Pro, Yoga Tablet 10, Yoga Tablet 10 HD+, and Yoga Tablet 2 (10 inches) LG: G Pad 10.1, G Pad II 10.1, G Pad X 10.1, and G Pad X II 10.1 Microsoft: Surface 2, Surface Pro, Surface Pro 2, Surface Go, and Surface Go 2 Nokia: T21 Samsung: Galaxy Book 10.6, Galaxy Tab 10.1, Galaxy Tab 2 10.1, Galaxy Tab 3 10.1, Galaxy Tab 4 10.1, Galaxy Tab A 9.7, Galaxy Tab A 10.5, Galaxy Tab A8 10.5, Galaxy Tab Active Pro, Galaxy Tab Active4 Pro, Galaxy Tab Pro 10.1, Galaxy Tab S 10.5, Galaxy Tab S2 9.7, Galaxy Tab S3 9.7, Galaxy Tab S4 10.5, Galaxy Tab S5e, Galaxy Tab S6, Galaxy Tab S7, Galaxy Tab S7 FE, Galaxy Tab S7 Plus, Galaxy Tab S8, and Galaxy Tab S8 Plus Sony: Vaio Tap 11, Xperia Tablet S, and Xperia Tablet Z Vankyo: MatrixPad Z4 10" Zebra: ET50 10" and ET55 10"