Triple Lok-Up Halyard Line Lock w/Bungee Rupp Lok-Ups are an innovative locking pulley system that locks your halyard lines, keeping your outrigger release clips right where you want them. Triple Pulley with 12" military grade bungee for Triple Rigging. Robust design that includes the following: Spring loaded trigger for positive locking and unlocking. Modular design that is adaptable to various rigging setups. Accepts a wide array of halyard line material and thicknesses. Replaceable, serviceable locking components. Available in Single, Double and Triple systems. Military grade bungee cord with stainless steel hardware.

Double Lok-Up Halyard Line Lock w/Bungee Rupp Lok-Ups are an innovative locking pulley system that locks your halyard lines, keeping your outrigger release clips right where you want them. Double Pulley with 12" military grade bungee for Double Rigging. Robust design that includes the following: Spring loaded trigger for positive locking and unlocking. Modular design that is adaptable to various rigging setups. Accepts a wide array of halyard line material and thicknesses. Replaceable, serviceable locking components. Available in Single, Double and Triple systems. Military grade bungee cord with stainless steel hardware.

Quad Lok-Up Halyard Line Lock w/Bungee Rupp Lok-Ups are an innovative locking pulley system that locks your halyard lines, keeping your outrigger release clips right where you want them. 4 Locking Pulleys mounted side by side with 12" military grade bungee for Quad Rigging or adding a teaser. Robust design that includes the following: Spring loaded trigger for positive locking and unlocking. Modular design that is adaptable to various rigging setups. Accepts a wide array of halyard line material and thicknesses. Replaceable, serviceable locking components. Available in Single, Double and Triple systems. Military grade bungee cord with stainless steel hardware.

Single Lok-Up Halyard Line Lock w/Bungee Rupp Lok-Ups are an innovative locking pulley system that locks your halyard lines, keeping your outrigger release clips right where you want them. Single Pulley with 12" for Single Rigging. Robust design that includes the following: Spring loaded trigger for positive locking and unlocking. Modular design that is adaptable to various rigging setups. Accepts a wide array of halyard line material and thicknesses. Replaceable, serviceable locking components. Available in Single, Double and Triple systems. Military grade bungee cord with stainless steel hardware.

Rupp Triple Rigging Kit W/Lok-Ups & Nok-Outs - 520' Black Mono Cord Complete rigging packages that allow you to run three (3) lines on each rigger. This kit includes (2) exclusive Rupp triple pulley halyard line locks with shock cords, 520ft of 400lb black mono-filament halyard lines three pair of Rupp NOK-OUT release clips, (6) Nylon ball stops, (2) Strap Eyes, (12) Snap Swivels, (12) Swivels.

Rupp Single Rigging Kit W/Lok-Ups & Nok-Outs - 160' Black Mono Complete rigging packages that allow you to run one (1) line on each rigger. This kit includes (2) exclusive Rupp single pulley halyard line locks with shock cords, 160ft of 400lb black mono-filament halyard lines one pair of Rupp NOK-OUT release clips, (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (4) Crimp Sleeves.

Rupp Double Rigging Kit w/Lok-Ups & Nok-Outs - 260' Black Mono Complete rigging packages that allow you to run two (2) lines on each rigger. This kit includes (2) exclusive Rupp double pulley halyard line locks with shock cords, 260ft of 400lb black mono-filament halyard lines, two pair of Rupp NOK-OUT release clips, (4) Nylon ball stops, (2) Strap Eyes, (8) Snap Swivels, (8) Crimp Sleeves.

400lb Black Monofilament Halyard Line 100' Roll High quality 400lb black monofilament for outrigger halyard lines. Sold in bundles of 100 foot lengths. Perfect for new outriggers or for re-rigging your existing ones.

Folding Halyard Line Retainer f/Telescoping Outrigger Poles This "clamp-on" Halyard Line Retainer from Rupp is an easy way to store your halyard lines while telescoping outriggers are rigged and in the retracted position. By simply clamping a pair Line-Cleats onto the outrigger pole at the desired distance, the excess rigging line is easily wrapped around the pop-up cleats to keep lines neat and orderly.  This one-of-a-kind system allows the cleats to be folded out of the way when not in use. Features and Benefits Easy clamp-on installation eliminates tangling and maintains rigging when outriggers are retracted Features a two position folding cleat that snaps into position, both open and closed, allowing the line cleat to be stowed while the outrigger is extended. Fits all Rupp Top Gun telescoping outrigger poles and any other - 1-1/2” diameter outrigger poles. Opposing cleat design allows for more winding options, ideal for double and triple rigging.  Add a third cleat on your pole for more line capacity! Clam shell packaging for durability and product visibility Clamp on assembly Durable rugged black nylon and stainless steel fasteners Sold as a Set (4-Pieces) - equips a pair of outrigger poles Robust modular design spring loaded cleats for positive locking and unlocking.  Rupp Line-Cleats accept a wide array of halyard line material and thicknesses. Replaceable, serviceable locking components.

Double Rigging Kit with Nok-Outs - 320' Black Mono Complete rigging packages that allow you to run two (2) lines on each rigger. This kit includes (2) exclusive Rupp double pulley halyard line locks with shock cords, 260ft of 400lb black mono-filament halyard lines, two pair of Rupp NOK-OUT release clips, (4) Nylon ball stops, (2) Strap Eyes, (8) Snap Swivels, (8) Crimp Sleeves.

Z-30 Top Gun Outrigger Kit - 15' Buy Rupp's complete Outrigger System and save money. The Rupp Sportfishing kits make it simple to have your boat ready to fish upon receipt. If your boat came "outrigger ready" with a Rupp outrigger mounting plate or similar plate from TACO or E-TEC Marine - your ready to bolt in a Rupp Outrigger and go. This package comes complete with a pair of Z-30 Bolt-In Top Gun Radial bases, a pair of 15' Telescoping poles and a complete single line rigging kit with Klicker release clips. Top Gun Telescoping Poles - 15' Pair Our 15 foot telescoping pole is comprised of three sections making it the most rigid and durable telescoping pole on the market. Very little flex and robust buttons make Rupp telescoping poles an obvious choice. Our telescoping poles are an ideal match for any of our Top Gun outrigger bases. Every part of these telescoping poles are fully serviceable, easy replaceable and made in the USA. O.D of outrigger base tube is 1.50", designed to fit perfectly into Rupp outrigger bases. Top Gun Bolt-In Z-30 Bases - Pair An innovative advance in Top Gun engineering, Rupp's Z-30 gear drive system offers unmatched ease of operation for top mount outriggers. Simply turning the palm-size handle deploys and retrieves riggers smoothly and effortlessly with an outstanding 30 to 1 advantage. Z-30 Top Guns are engineered for durability with a high strength, forged aluminum body that protects cutting edge components. Now with anodized aluminum knob and other enhancements. Forged 4" x 6" mounting flange provides ease of BOLT-IN installation and below top operation. Designed to accept Rupp Top Gun poles in 15' or 18'. Top Gun Rigging Kit w/Klickers Complete rigging packages that allow you to run One (1) lines on each rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 50ft of white braided nylon halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This rigging kit is for small outriggers, 20' and under.

Z-30 Top Gun Outrigger Kit - 18' Buy Rupp's complete Outrigger System and save money. The Rupp Sportfishing kits make it simple to have your boat ready to fish upon receipt. If your boat came "outrigger ready" with a Rupp outrigger mounting plate or similar plate from TACO or E-TEC Marine - your ready to bolt in a Rupp Outrigger and go. Top Gun Telescoping Poles - 18' Pair Our 18 foot telescoping pole is comprised of three sections making it the most rigid and durable telescoping pole on the market. Very little flex and robust buttons make Rupp telescoping poles an obvious choice. Our telescoping poles are an ideal match for any of our Top Gun outrigger bases. Every part of these telescoping poles are fully serviceable, easy replaceable and made in the USA. O.D of outrigger base tube is 1.50", designed to fit perfectly into Rupp outrigger bases. Top Gun Bolt-In Z-30 Bases - Pair An innovative advance in Top Gun engineering, Rupp's Z-30 gear drive system offers unmatched ease of operation for top mount outriggers. Simply turning the palm-size handle deploys and retrieves riggers smoothly and effortlessly with an outstanding 30 to 1 advantage. Z-30 Top Guns are engineered for durability with a high strength, forged aluminum body that protects cutting edge components. Now with anodized aluminum knob and other enhancements. Forged 4" x 6" mounting flange provides ease of BOLT-IN installation and below top operation. Designed to accept Rupp Top Gun poles in 15' or 18'. Top Gun Rigging Kit w/Klickers Complete rigging packages that allow you to run One (1) lines on each rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 50ft of white braided nylon halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This rigging kit is for small outriggers, 20' and under.

Custom Halyard Line Stop  Custom nylon outrigger ball stop, complete with RUPP logo. More durable than cork. Center hole accepts either monofilament or nylon halyard lines. SOLD INDIVIDUALLY 

Custom Halyard Line Stop - Pair Package of two custom nylon outrigger ball stops. More durable than cork. The center hole accepts either monofilament or nylon halyard lines up to 1/8 in. diameter. Features: Color: Black The Rupp logo is on the stops Sold as a pair (two)

Halyard Line Tensioner Thru Gunwale/Fairlead - 2.875" This Halyard Line Tensioner is a stainless steel fairlead tube that attaches to a stainless mounting bracket that has a jam cleat attached. This allows for an easy installation in the gunwale. The fairlead tubes are available in lengths of 2.875 or 3.875, please select the appropriate option. Sold each.