RAM Mount Large Tough-Claw Base w/Double Socket Arm & 1.5" Round Base A
dapter
The RAP-401-202U consists of the large Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™: is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 2.25" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
1" to 2.25"
Clamping Range (Flat Surfaces):
0" to 2.2"
|
84.79 | |
Medium Tough-Claw™ Base w/Double Socket Arm & 1.5" Round Base Adapter
The RAP-404-202U consists of the small Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 1.875" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
1" to 1.875"
Clamping Range (Flat Surfaces):
0" to 1.6"
Specifications/Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
71.12 | |
Medium Tough-Claw™ Base w/Double Socket Arm & Diamond Base Adapter
The RAP-B-404-238U consists of the medium Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.875" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
1" to 1.875"
Clamping Range (Flat Surfaces):
0" to 1.6"
Specifications/Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
46.37 | |
Small Tough-Claw™ Base with Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle
The RAM-B-400-UN7 consists of the Tough-Claw™ rail clamp base, STANDARD length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Features:
Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5"
Clamping Range (Flat Surfaces): 0" to 1.14"
Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25"), Maximum Width = 3.25" (Minimum Height = 2.25"), Depth = 0.875"
Rustproof
High strength composite and stainless steel construction
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Socket technology allows for multiple adjustment angles and articulation of device
Includes Tether for open cockpit and extreme environments
Lifetime warranty
Made in U.S.A.
Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size: 1" Rubber Ball "B" Size
Note: Part number reflects product packaged in clear clam shell for store shelf display. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
Weight: 0.95 lbs.
|
71.12 | |
Tough-Claw™ Base w/Double Socket Arm & Diamond Base Adapter
The RAP-B-400-238U consists of the small Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Specifications/Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
0.35 lbs.
|
41.52 | |
Universal No-Drill RAM Pod HD Vehicle Mount w/Double Socket Arm & 2.5" Round Base (AMPS Hole Pattern)
Pole Length:
12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
161.29 | |
RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.68" Round Base
The RAM-316-3-240U consists of the RAM POD III No-Drill vehicle base, three rigid aluminum rod legs, double socket arm, 2.5" round bases that contain the universal AMPs hole pattern and 3.68" round base. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The 3.68" round base contains pre-drilled holes that connect to RAM Tough-Dock Powered Docking Stations.
Leg Lengths:
18", 20" and 30"
Installation Instructions:
At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
140.52 | |
Universal No-Drill™ RAM POD HD™Vehicle Mount with Double Socket Arm & 2.5" Round Base AMPs Hole Pattern
Blending the best of versatility, strength and installation ease; the RAM POD HD™ is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM POD HD™is an ideal solution for mounting tablets, small laptops and other similar devices. Requiring minimal space in the vehicle cab, it can be remove quickly without the use of tools. The versatility of the RAM POD HD™ makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types and other applications which require a robust mounting platform for your tablet.
Pole Length:
Minimum: 18.75”
Maximum: 25.75”
Features:
Low Profile, Low Cost and Extremely Robust:
- The minimalist design offers a low profile form factor while offering an extremely robust mounting platform
- Ideal mounting solution for fleet and service vehicle fleets with a varying range of vehicles. Stands up to the demands of field applications
Highly Versatile:
- Angle adjustment feature to compensate for varying floorboard angles
- Can be used as a horizontal or vertical flat surface drill-down mount
- aluminum post can be cut to size in order to accommodate varying vehicle configurations
Easy to Install and Remove:
- Works on most vehicles. Fast and simple installation, requires no drilling or modification to your vehicle
- Attaches using an existing seat rail bolt or seat track
- Remove the upper portion of the mount with the turn of one knob, creating valuable space in the cab when the mount is not in use
Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1.5" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag
Weight: 5.15 lbs.
|
167.00 | |
RAM Mount POD III Universal No-Drill Mount w/Double Socket Arm, 2.5" Round Base & 3.625" Square Base RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)
The RAM-316-3-2461U consists of the RAM POD III No-Drill vehicle base, 3 rigid aluminum rod legs, double socket arm, 2.5" round base that contain the universal AMPs hole pattern and 3.625" square base that contains the VESA hole pattern. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.
Leg Lengths:
18", 20" and 30"
Installation Instructions:
At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
140.00 | |
Small Tough-Claw™ Base w/1" Ball & M6 x 30 SS Hex Head Bolt f/Raymarine Dragonfly-4/5 & WiFish
The RAM-B-400-379-M616U consists of the Tough-Claw™ rail clamp base, STANDARD length double socket arm and 1" diameter ball, containing a M6 x 30 SS HEX head bolt. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
The RAM-B-400-379-M616U reduces the mounting footprint, compared to old dragonfly units that contain a large neck. This mount allows for a seamless marriage of RAM components into your Raymarine system, opening up the ball and socket system and all of our mounting options to you.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Specifications/Features:
Rustproof
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Raymarine device not included with purchase.
|
48.68 | |
RAM Mount Universal Tough-Claw™ Base w/Long Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle Universal Tough-Claw™ Base w/Long Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle
The RAM-B-400-C-UN7U consists of the Tough-Claw™ rail clamp base, LONG length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
X-Grip® Cradle Dimensions
Minimum Width = 1.875"
Maximum Width = 3.25"
Depth = 0.875"
Specifications/Features:
Rustproof
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM highly recommends adding a secondary tethering device for all open cockpit applications while using this product.
|
74.77 | |
Small Tough-Claw™ Base w/Short Double Socket Arm and Universal X-Grip® Cell/iPhone Cradle
The RAM-B-400-A-HOL-UN7BU consists of the Tough-Claw™ rail clamp base, SHORT length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Cradle Dimensions
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Features:
Rustproof
High strength composite and stainless steel construction
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Socket technology allows for multiple adjustment angles and articulation of device
Includes Tether for open cockpit and extreme environments
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
|
66.07 | |
Twist Lock Suction Cup Mount with Long Double Socket Arm & 2.5" Round Base - AMPS Hole Pattern (9" Length)
The RAM-B-166-C-202U consists of a 3.3" suction cup twist lock base, long double socket arm and round base that contains the universal AMPs hole pattern. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to most RAM cradles and 3rd party cradles.
Overall Length:
9"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.
|
43.60 | |
Tough-Claw Small Clamp Mount w/Double Socket Arm - 1" Ball
MODULAR DESIGN
The rubber ball and socket design offers a secure hold with infinite options and vibration dampening for demanding environments.
BEST WARRANTY
The philosophy is simple—build the best products available. And so our warranty is simple too. If we built it, we guarantee it. We are confident in the quality of our products, and with our warranty, you can be too.
MADE IN AMERICA
The all-American staff designs, manufactures, assembles, and sells our products right here, and ships them straight to you.
Clamp Range: .625" - 1.14" diameter
Socket to Socket Length: 1.75"
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2 lbs/Heavy-Duty Use: 1 lb
Materials: Marine-grade aluminum/High strength composite
|
41.65 | |
RAM Fork Stem Motorcycle Base with Double Socket Arm and Diamond Base Adapter
The RAM-B-176U consists of a fork stem motorcycle base, double socket arm and diamond base adapter. The diamond adapter base has a hole pattern that matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The fork stem base is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5 degrees to 1.10 degrees at the following intervals:
Metric Standard
12mm
.5 degrees
14mm
.5 degrees
16mm
.63 degrees
18mm
.71 degrees
20mm
.79 degrees
28mm
1.10 degrees
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM recommends that you review the installation instructions for this part prior to ordering.
|
34.61 | |