|
Tough-Claw Mount w/Self-Leveling Cup Holder
The RAM-B-132-400U consists of the small Tough-Claw base and universal self-leveling drink cup holder. The drink cup holder has two pivot points, allowing for your drink to always stay upright and never spill. Cozy is included with purchase of the RAM-B-132-400U. This mount rotates 360 degrees.
The RAM-B-132-400U includes the RAM Tough-Claw; the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars and flat surfaces. The compact design allows easy installation in a wide variety of applications including motorcycles, kayaks and boats, bicycles, wheelchairs, medical carts and more. The marriage of tool-less removal and a low-profile makes this must have accessory easy to pack with you wherever you go.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Material:
High Strength Composite & Stainless Steel
Note:
The "U" in the part number reflects product packaged in poly bag.
|
28.57 |
|
|
Tough-Claw w/Short Arm & 1/4"-20 Post
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
|
48.89 |
|
|
RAM® Tough-Claw® with RAM® Flex-Rod™ 26" Extension Arm for Wheelchairs
This kit includes a small RAM® Tough-Claw™ clamp base connected to an 18” RAM® Flex-Rod™ and medium double socket arm. The RAM® Tough-Claw™ can be clamped to 0.625" - 1.5" diameter rails. Designed for use with popular wheelchair brands, clamp the RAM® Tough-Claw™ in place and pair with your preferred B size device holder.
Specifications:
Overall Length: 26"
Ball Size: B Size 1" Rubber Ball
Material: Powder Coated Marine Grade Aluminum and High-Strength Composite
|
70.80 |
|
|
RAM Medium Tough-Claw w/1" Diameter Rubber Ball
The RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 1" to 2.25" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM Tough-Claw will soon become another essential RAM component in your collection of mounting options.
Clamping Range:
1" to 1.875"
Physical Dimensions:
Height: 5.25"
Width: 1.56"
Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite and Stainless Steel Hardware
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
34.52 |
|
|
Level Cup™ XL w/Small Tough-Claw™
Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL with an integrated Tough-Claw™. The Tough-Claw allows for tool-less removal and adjustments on any rail or flat bar. The Tough-Claw can attach to any surface from flat through a 1.5” railing. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.
Koozie included with purchase of this product.
Common Beverage Sizes:
12oz Cans
Water Bottles
Insulated Cups
32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask)
Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5"
Clamping Range (Flat Surfaces): 0" to 1.14"
Material: High Strength Composite
Note: The "U" in the part number reflects product packaged in poly bag
Compatible Dimensions:
Width Range: 2.6" - 3.5"
Height Range: 3.75" - 11"
|
46.39 |
|
|
RAM Large Tough-Claw with 1.5" Diameter Rubber Ball
The RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 1" to 2.25" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM Tough-Claw will soon become another essential RAM component in your collection of mounting options.
Clamping Range:
1" to 2.25"
Physical Dimensions:
Height: 6.56"
Width: 2.25"
Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite and Stainless Steel Hardware
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
52.16 |
|
|
RAM Self-Leveling Cup Holder with 1" Ball & Cozy
A favorite world wide, the RAM Self Leveling Drink Cup holder will bring a smile to anyone's face when they get it. The perfect accessory for any vehicle including motorcycles, ATV's, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
18.79 |
|
|
RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base, Self-Leveling Cup Holder & Cozy
Drink Cup Mount Description:
A favorite world wide, the RAM self leveling drink cup holder will bring a smile to anyone's face when they get it. The perfect accessory for any vehicle including motorcycles, ATV's, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride.
Motorcycle Handlebar Mount Description:
The u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware for tubing that is 0.50" to 1.25" in diameter.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
38.78 |
|
|
Level Cup™ XL w/Single Socket for B Size 1" Ball
Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup™ XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL that has an integrated single-socket arm. This cup holder can attach to any B-size base or RAM® Mounts B-size ball accessory. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.
Koozie included with purchase of this product.
Common Beverage Sizes:
12oz Cans
Water Bottles
Insulated Cups
32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask)
Material: High Strength Composite
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag
Compatible Dimensions:
Width Range: 2.6" - 3.5"
Height Range: 3.75" - 11"
|
33.50 |
|
|
Tough-Claw Mount w/Universal X-Grip Phone Holder
The RAM-HOL-UN7-400U consists of the small Tough-Claw base and universal X-Grip holder. The X-Grip holder has a clean and clever four leg design that sports great holding power without hiding your smart-phone behind foam pads and plastic. The X-Grip holder expands and contracts for perfect fit of most smart phones. This mount rotates 360 degrees.
The RAM-HOL-UN7-400U includes the RAM Tough-Claw; the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars and flat surfaces. The compact design allows easy installation in a wide variety of applications including motorcycles, kayaks and boats, bicycles, wheelchairs, medical carts and more. The marriage of tool-less removal and a low-profile makes this must have accessory easy to pack with you wherever you go.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Holder Dimensions:
Minimum Width = 1.875"
Maximum Width = 3.25"
Depth = 0.875"
Material:
High Strength Composite & Stainless Steel
Note:
The "U" in the part number reflects product packaged in poly bag.
|
51.37 |
|
|
RAM Medium Tough-Claw with 1.5" Diameter Rubber Ball
The RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 1" to 1.875" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM Tough-Claw will soon become another essential RAM component in your collection of mounting options.
Clamping Range:
1" to 1.875"
Physical Dimensions:
Height: 5.25"
Width: 1.56"
Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite and Stainless Steel Hardware
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
38.42 |
|
|
RAM Large Tough-Claw with 1" Diameter Rubber Ball
The RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 1" to 2.25" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM Tough-Claw will soon become another essential RAM component in your collection of mounting options.
Clamping Range:
1" to 2.25"
Physical Dimensions:
Height: 6"
Width: 2.25"
Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite and Stainless Steel Hardware
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
48.31 |
|
|
Tough-Claw™ Base w/Long Double Socket Arm & Universal X-Grip® Cradle w/1" Ball f/7" Tablets
The RAM-B-400-C-UN8U consists of the Tough-Claw™ rail clamp base, LONG length double socket arm and universal spring loaded X-Grip® cradle for 7" tablets. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
X-Grip® Cradle Dimensions
Minimum Width = 2.25"
Maximum Width = 5.75"
Depth = 0.875"
Specifications/Features:
Rustproof
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
RAM Highly Recommends adding a secondary tethering device for all open cockpit applications while using this product. The "U" in the part number reflects product packaged in poly bag.
|
84.79 |
|
|
Level Cup™ XL w/B Size 1" Ball
Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup™ XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL with a B-size RAM® Mounts ball directly attached. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.
Koozie included with purchase of this product.
Common Beverage Sizes:
12oz Cans
Water Bottles
Insulated Cups
32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask)
Material: High Strength Composite
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag
Compatible Dimensions:
Width Range: 2.6" - 3.5"
Height Range: 3.75" - 11"
|
34.40 |
|
|
RAM Level Cup™ XL with Torque™ 3/4" – 1" Diameter Rail Base and Short Arm
Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup XL keeps your drink upright, regardless of the conditions. This kit includes a short arm and a Torque™ base that accommodates round rails from .5” through 1”. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.
Common Beverage Sizes:
- 12oz Cans
- Water Bottles
- Insulated Cups
- 32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask)
Compatible Dimensions:
Width Range: 2.6" - 3.5"
Height Range: 3.75" - 11"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
57.44 |
|