|
RAM 1" Ball Adapter for GoPro®Mounting Bases
For anyone who needs more versatility from their GoPro® mounting solution, look no further than the RAM Adapter for GoPro Bases. Utilizing the RAM ball and socket mounting system, simply attach the included B Size 1” ball to the base for enhanced adaptability and superior vibration dampening – letting you get the most out of your GoPro.
Features:
Patented rubber ball design dampens shock and vibration helping to extend the life of your camera.
Mount to many RAM double socket arms and holders.
Lifetime warranty.
Made in the U.S.A.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag
|
10.10 |
|
|
RAM 1" Ball Mount with Track Ball™ Base & 1.5" x 3" Plate for the Humminbird Helix 5 ONLY
The RAP-B-202-153-354-TRA1U consists of a Track Ball™ base, composite double socket arm and 1.5" x 3" rectangular plate. The rectangular plate contains four holes that will line up with the Humminbird Helix 5. The Track Ball™ will connect to virtually any track system including the RAM Tough-Track™
Overall Height:
5"
Material:
High Strength Composite
Ball Size:
1" Rubber Ball Size
Note:
Part number reflects product packaged in a poly bag. Hardware for mounting to device not included with purchase.
|
28.40 |
|
|
RAM 1" Diameter Ball Mount w/2 Diamond Bases
The RAM-B-102U consists of a double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
24.92 |
|
|
RAM 1" Ball Adapter for GoPro® Bases with Short Arm and Action Camera Adapter
For anyone who needs more versatility from their GoPro® mounting solution, look no further than the RAM Adapter for GoPro Bases. Utilizing the RAM ball and socket mounting system, simply attach the included B Size 1” ball to the base for enhanced adaptability and superior vibration dampening – letting you get the most out of your GoPro. This kit includes a short arm and two-pronged universal action camera for even greater versatility, allowing for an easily adjustable 360-degree rotation of your camera.
Features:
Patented rubber ball design dampens shock and vibration helping to extend the life of your camera.
360-degree rotation of your action camera.
Compatible with any action camera with univeral mounting hinge.
Lifetime warranty.
Made in the U.S.A.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in a poly bag
|
25.04 |
|
|
RAM Triple 1" Ball Base
Material: Powder Coated Marine Grade Aluminum
Color: Black Powder Coat
Ball Size: 1" Rubber Ball
|
36.80 |
|
|
RAM® Tough-Ball™ for Bronco Hood Tie-Down
The RAM® Tough-Ball™ for Bronco Hood Tie Down (RAP-B-379U-252062-2SLW) is a 1" diameter rubber ball connected to a 1/4"-20 x.625" male threaded post, ideal for installing RAM® Mounts on the Bronco Hood Tie Down.
The included split lock washers ensure a secure connection in rugged environments when the RAM® Tough-Ball™ is used as an anchor point for a mounting system. This base replaces the OEM exposed bolts on the hood tie-down found on all Ford Bronco models, including the base model, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage, and Raptor.
Features:
Includes RAM® Tough-Ball™ with 1/4"-20 x .625" threaded stud and two split lock washers
Compatible with B size RAM® double socket arms, ball and socket technology allows for near-infinite adjustability
Made of powder-coated, marine-grade aluminum and stainless steel components for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: (2) Split Lock Washers
Thread Pitch: 1/4"-20 x .625"
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2 lbs; Heavy-Duty Use: 1 lb
Materials: High-strength composite, stainless steel threads
Packaging Type: Polybag
Weight: 0.11 lbs
|
14.90 |
|
|
RAM Motorcycle 1" Ball Adapter for Brake/Clutch Reservoir Base
This ball connects to the open hole on the side of the RAM-B-309-1U (single 1" ball) and is included with the purchase of the RAM-B-309-2U (double 1" ball).
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
9.40 |
|
|
RAM® Tough-Ball™ for Bronco Hood Tie-Down with Action Camera Adapter
The RAM® Tough-Ball™ for Bronco Hood Tie Down with Action Camera Adapter (RAP-B-379-252062-2SLW-A-GOP1U) is an action camera mounting solution that installs on the Bronco Hood Tie Down. This kit includes a medium-length double socket arm, a 1" diameter ball with a custom GoPro® Hero adapter, and a 1" diameter rubber ball connected to a 1/4"-20 x.625" male threaded post.
The included split lock washers ensure a secure connection in rugged environments when the RAM® Tough-Ball™ is used as an anchor point for a mounting system. This base replaces the OEM exposed bolts on the hood tie-down found on all Ford Bronco models, including the base model, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage, and Raptor.
Features:
Action camera adapter includes a 1" B-size RAM® rubber ball and is compatible with GoPro® and most other brands; attaches to the underside of cameras
Includes RAM® Tough-Ball™ with 1/4"-20 x .625" threaded stud and two split lock washers
Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware, (2) split lock washers
Socket to Socket Length: 1.75"
Thread Pitch: 1/4"-20 x .625"
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb
Materials: High-strength composite, stainless steel threads
Packaging Type: Polybag
Weight: 0.31 lbs
Compatible Devices:
GoPro: Hero, Session
Garmin: Virb
SJCAM: SJ4000, SJ5000X Elite 4K
Muvi: veho K-Series K-2 Pro 4K
Xcel: 1080C
Vivitar: HD
ACTIVEON: CX Gold
Discovery: Kids Photo & Video Adventure Camera
AEE: ACE S70 Black 16MP 2"
AKASO: EK7000 4K WIFI Sports
AEDILYS: 4K WIFI Sports
Lightdow: LD4000 1080P HD
WiMiUS: Q2 Black 1080P Wifi
Vtin: 4k, WiFi
|
34.98 |
|
|
RAM Double Socket Arm for 1.5" Ball Bases
The RAM-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 5.625"
Socket-To-Socket Length: 4.5"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
|
22.48 |
|
|
Double Socket Arm with Two 2.5 Inch Round Bases
The RAM-101-G2U consists of a double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both ends of the double socket arm. With a twist of the arm knob, you can move the RAM-101-G2U mount to your optimum viewing position.
This mount is designed to hold the following devices:
Garmin Fishfinder 120
Garmin Fishfinder 140
Garmin Fishfinder 250
Garmin Fishfinder 250c
Garmin Fishfinder 340c
Garmin Fishfinder 400c
Garmin Fishfinder 80
Garmin Fishfinder 90
Garmin GPSMAP 172
Garmin GPSMAP 172c
Garmin GPSMAP 178 Sounder
Garmin GPSMAP 178c Sounder
Garmin GPSMAP 292
Garmin GPSMAP 298 Sounder
Garmin GPSMAP 420
Garmin GPSMAP 420s
Garmin GPSMAP 421
Garmin GPSMAP 421s
Garmin GPSMAP 430
Garmin GPSMAP 430s
Garmin GPSMAP 431
Garmin GPSMAP 431s
Garmin GPSMAP 440
Garmin GPSMAP 440s
Garmin GPSMAP 441
Garmin GPSMAP 441s
Garmin GPSMAP 450
Garmin GPSMAP 450s
Garmin GPSMAP 520
Garmin GPSMAP 520s
Garmin GPSMAP 521
Garmin GPSMAP 521s
Garmin GPSMAP 525
Garmin GPSMAP 525s
Garmin GPSMAP 526
Garmin GPSMAP 526s
Garmin GPSMAP 530
Garmin GPSMAP 530s
Garmin GPSMAP 531
Garmin GPSMAP 531s
Garmin GPSMAP 535
Garmin GPSMAP 535s
Garmin GPSMAP 536
Garmin GPSMAP 536s
Garmin GPSMAP 540
Garmin GPSMAP 540s
Garmin GPSMAP 541
Garmin GPSMAP 541s
Garmin GPSMAP 545
Garmin GPSMAP 545s
Garmin GPSMAP 546
Garmin GPSMAP 546s
Garmin GPSMAP 550
Garmin GPSMAP 550s
Garmin GPSMAP 555
Garmin GPSMAP 555s
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
48.89 |
|
|
Composite 1" Ball Short Length Double Socket Arm w/2.5" Round Base Including AMPs Hole Pattern
The RAP-B-103U-A consists of a 2.5" round base and SHORT double socket arm that will accept 1" ball bases. The round base contains pre-drilled holes, including the universal AMPS hole pattern. Designed into the mount is a 1" diameter rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position.
Dimensions:
Overall Length: 3"
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
0.24 lbs.
|
12.62 |
|
|
RAM 1" Diameter Ball with 1/4-20 Stud for Cameras, Video & Camcorders
The RAP-B-366U, universal camera and camcorder base, consists of a 1" diameter rubber ball, connected to a round plate with 1/4"-20 camera thread. The round plate provides extra support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.
Compatible Cameras:
Contour GPS
Contour HD
Gobandit GPS-HD
GoPro HD Helmet HERO
GoPro HD Motorsports HERO
GoPro HD Surf HERO
GoPro Helmet HERO Wide
GoPro Motorsports HERO
GoPro Motorsports HERO Wide
GoPro RC HERO
GoPro Surf Hero
GoPro Wide HERO
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
9.11 |
|
|
RAM Double 1" Ball Adapter
The RAM-B-230U, double ball joiner, consists of a 1" rubber ball on both ends that allow the connection of two 1" socket arms. When measured from ball center to ball center the arm length is 1.75". This mount is ideal if the your mount arm is just too short.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
|
14.11 |
|
|
1.5" Ball "Rugged Use" Composite Mount f/Lowrance Elite-5 & Mark-5 Series Fishfinders
The RAP-101U-LO11 consists of a 2.5" diameter round base that contains the universal AMPS hole pattern double socket arm and adapter base that inserts directly to the back of Lowrance Elite-5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
Material:
High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM recommends this mount for "Rugged Use" mounting applications, including heavy weight Lowrance Elite and Mark Fishfinders.
|
37.51 |
|
|
Torque™ 1-1/2" - 2" Diameter Rail Base with 1" Pin-Lock™ Ball
The RAM® Torque™ rail mounting base securely attaches to bars 1.5” to 2” in diameter. The double-sided Pin-Lock™ rail base and ball allows for the connection of up to two devices and is ideal for securing small electronics, spotlights, cameras, or cup holders to ATVs, UTVs, off-road vehicles and heavy equipment rail bars. Sizing inserts are included to provide a snug fit and protection of the rail, and the mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments.
Available separately, the RAM B Size Ball Add-On allows you to attach an additional B Size Ball to the Torque™ Rail Base for mounting multiple devices.
Material:
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in a poly bag.
|
34.66 |
|