|
RAM Double Swing Arm w/4" Male & No Female Tele-Pole
Swing Arm connects to a 75mm x 75mm VESA Plate.
|
97.74 |
|
|
RAM Double Swing Arm with 4" Male and No Female Tele-Pole
The RAM-VP-SW1-4, combination swing arm/tele-pole system, will connect to any RAM vehicle base with a welded female tele-pole, as well as RAM Framed Tough-Box Consoles. Included is a 4" tele-pole that can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray. The double swing arm mount includes a base & ball with pre-drilled holes, including the universal AMPS hole pattern; this accommodating most keyboards. The length of the double swing arm is 12".
Material:
Powder Coated Marine Grade Aluminum
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
88.50 |
|
|
RAM Double Swing Arm w/4" Male and No Female Tele-Pole
Swing Arm Connects to a Laptop Tray.
|
150.71 |
|
|
RAM Double Swing Arm w/8" Male & No Female Tele-Pole
Swing Arm connects to No Ball Base.
Material: Powder Coated Steel
Color: Black Powder Coat
|
79.80 |
|
|
RAM Double Swing Arm with 8" Male and No Female Tele-Pole
Material: Powder Coated Steel
Color: Black Powder Coat
|
95.93 |
|
|
RAM Double Swing Arm w/8" Male and No Female Tele-Pole
Swing Arm connects to 3.68" Diameter ball base.
|
101.44 |
|
|
8" Upper Pole with Double Swing Arms & 75 x 75mm VESA Plate
The RAM-VP-SW1-8-2461 consists of a 8" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole pattern. The Tele-Pole™can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". The 3.625" square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.
Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: Part number reflects product packaged in clear clam shell for store shelf display
|
100.09 |
|
|
RAM Double Swing Arm with 8" Male Tele-Pole™, 9" Female Tele-Pole™ & 2.5" Round Base (AMPs Hole Pattern)
Description
The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray.
The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball "C" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
109.96 |
|
|
RAM 1.5" Diameter Ball Mount with 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)
The RAM-101U-2461 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 3.625" square plate with the VESA hole pattern. The VESA plate contains a 75mm X 75mm hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
50.93 |
|
|
RAM 1" Diameter Ball Double Socket Arm with Diamond Base
Part #: RAM-B-103-238U
The RAM-103-238U consists of a diamond base and double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
19.21 |
|
|
RAM 1" Diameter Ball Double Socket Arm with 2.5" Round Base that contains the AMPs Hole Pattern
Part #: RAM-B-103U
The RAM-B-103U consists of a 2.5" round base and double socket arm that will accept 1" ball bases. The round base contains pre-drilled holes, including the universal AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
20.33 |
|
|
RAM Double Socket Arm w/Jam Nut f/2.25" Ball Bases
Part #: RAM-D-201U-MI1
The RAM-D-201U-MI1, standard size double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 8.375"
Socket-To-Socket Length: 6.5625"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber Ball "D" Size
|
75.55 |
|
|
Double Socket Arm with Dual Extension & Ball Adapter
The RAM-B-201U, Medium length double socket arm, has a socket at both ends that accommodates B Size 1" balls. A single spring inside the arm, keeps the socket open, allowing you to incert the ball in to the socket connection. RAM's socket technology allows for almost infinite adjustment to achieve the perfect viewing angle.
Featuring:
Dimensions: Overall Length: 3.69"
Socket-To-Socket Length: 3"
Material: Powder Coated Marine Grade Aluminum
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 0.31 lbs.
|
39.83 |
|
|
RAM Double Socket Arm with Locking Knob for 1.5" Ball Bases
The RAM-201LU, standard double socket arm with locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The locking knob, includes a brass 1/4"-20 thread; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it.
Dimensions:
Overall Length: 5.625"
Socket-To-Socket Length: 4.5"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
48.36 |
|
|
RAM Double Socket Arm with Small Size Locking Knob for 1.5" Ball Bases
The RAM-201U-BL, standard double socket arm with small size locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The locking knob, includes a brass 1/4"-20 thread; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it.
Dimensions:
Overall Length: 5.625"
Socket-To-Socket Length: 4.5"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
44.96 |
|