|
RAM Mount M8 Handlebar Base w/Diamond
Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up.
Included:
(1 QTY) 1" Rubber Ball
(1 QTY) M8 x 55 bolt (1.25 thread pitch)
(1 QTY) M8 x 60 bolt (1.25 thread pitch)
(1 QTY) M8 x 65 bolt (1.25 thread pitch)
(1 QTY) Standard B Size Arm
(1 QTY) Diamond Base with Ball
Material:
Powder Coated Marine Grade Aluminum
Attachment Point:
Motorcycle handlebar top clamp, any bike that uses an M8 threaded bolt.
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
27.32 |
|
|
RAM Mount M8 Handlebar Base w/Diamond
Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up.
Included:
(1 QTY) 1" Rubber Ball
(1 QTY) M8 x 55 bolt (1.25 thread pitch)
(1 QTY) M8 x 60 bolt (1.25 thread pitch)
(1 QTY) M8 x 65 bolt (1.25 thread pitch)
(1 QTY) Standard B Size Arm
(1 QTY) Diamond Base with Ball
Material:
Powder Coated Marine Grade Aluminum
Attachment Point:
Motorcycle handlebar top clamp, any bike that uses an M8 threaded bolt.
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
25.79 |
|
|
RAM 1" Diameter Ball Double Socket Arm with Diamond Base
Part #: RAM-B-103-238U
The RAM-103-238U consists of a diamond base and double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
19.21 |
|
|
RAM Mount Universal X-Grip Holder Diamond Base Surface Mount
Part #: RAM-B-102-UN7U
The RAM-B-102-UN7U consists of a double socket arm, diamond base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
48.52 |
|
|
RAM Drink Cup Holder Mount w/ Diamond Base
Part #: RAM-B-102-132u
A favorite world wide, the RAM self leveling drink cup holder will bring a smile to anyone's face when they get it. The perfect accessory for any vehicle including motorcycles, ATV's, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride.
Included is a cozy, self leveling drink cup, double socket arm and diamond plate that contains the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with an adjustment point at the diamond plate and base of the cup holder.
Ball Size:
1" Rubber "B" Ball Size
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
|
32.59 |
|
|
Tough-Claw™ Base w/Double Socket Arm & Diamond Base Adapter
The RAP-B-400-238U consists of the small Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Specifications/Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
0.35 lbs.
|
41.52 |
|
|
RAM® X-Grip® Large Phone Mount with RAM® Tough-Strap™ Handlebar Base
The RAM® Tough-Strap™ is the lowest-profile rugged mounting solution for any bike or motorcycle handlebars. With two different size straps, easily install the RAM® Tough-Strap™ on any mountain bike, road bike, or e-bike with a simple twist of a knob. This RAM® Tough-Strap™ Handlebar Mounting kit utilizes the RAM® Pin-Lock™ system to secure the included Large RAM® X-Grip® for a low-profile fitting on your handlebar. The long strap is used for bar diameters ranging from 1.25"-1.38" while the short strap is used for diameters ranging from 0.875"-1". Utilize the extra rubber strip to cut down to the diameter range of 1"-1.125" for a more custom fit. Take the low-profile RAM® Tough-Strap™ on your next adventure on and off the road.
Features:
Low profile handlebar mount for large phones includes the new RAM® Tough-Strap™ and large RAM® X-Grip®, easily attaching to your handlebar with the turn of a single knob; includes two different strap sizes for handlebars ranging from 0.875"-1", 1"-1.25" and 1.25"-1.38"
Ideal handlebar phone mount for all bike types, including mountain bikes, road bikes, and e-bikes
Spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use; check compatibility section below to see if your phone will fit
Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Hardware Included:
(1) X-Grip Phone Holder
(1) #10-24 x 2" Hex Bolt
(1) Long Strap
(1) Short Strap
(1) Long Rubber Strip
(1) Short Rubber Strip
(1) Tightening Knob
(1) Tether
Specifications:
Holder Dimensions: Width Range: 1.75"-4.5", Depth Range: .875" Max
Clamp Range: 0.875"-1.38"
Materials: High Strength Composite
Weight: 0.41lbs
|
35.35 |
|
|
RAM® X-Grip® Phone Mount with RAM® Tough-Strap™ Handlebar Base
The RAM® Tough-Strap™ is the lowest-profile rugged mounting solution for any bike or motorcycle handlebars. With two different size straps, easily install the RAM® Tough-Strap™ on any mountain bike, road bike, or e-bike with a simple twist of a knob. This RAM® Tough-Strap™ Handlebar Mounting kit utilizes the RAM® Pin-Lock™ system to secure the included standard size RAM® X-Grip® for a low-profile fitting on your handlebar. The long strap is used for bar diameters ranging from 1.25"-1.38" while the short strap is used for diameters ranging from 0.875"-1". Utilize the extra rubber strip to cut down to the diameter range of 1"-1.125" for a more custom fit. Take the low-profile RAM® Tough-Strap™ on your next adventure on and off the road.
Features:
Low profile handlebar mount for standard size phones includes the new RAM® Tough-Strap™ and RAM® X-Grip®, easily attaching to your handlebar with the turn of a single knob; includes two different strap sizes for handlebars ranging from 0.875"-1", 1"-1.25" and 1.25"-1.38"
Ideal handlebar phone mount for all bike types, including mountain bikes, road bikes, and e-bikes
Spring-loaded 'X' design for standard size phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use; check compatibility section below to see if your phone will fit
Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Hardware Included:
(1) X-Grip Phone Holder
(1) #10-24 x 1" Machine Screw
(1) #10-24 Nylock Nut
Pin-Lock Base
(1) Straight Rubber Spacer
(1) Angled Rubber Spacer
(2) Cable Ties
(1) Rubber Adhesive Pad
(1) Glue For Caps
(1) Tether
Specifications:
Holder Dimensions: Width Range: 1.875" - 3.25", Depth Range: .875" Max
Clamp Range: 0.875" - 1.38"
Materials: High strength composite
Weight: 0.37lbs
|
34.12 |
|
|
Tough-Claw™ Base w/Long Double Socket Arm & Universal X-Grip® Cradle w/1" Ball f/7" Tablets
The RAM-B-400-C-UN8U consists of the Tough-Claw™ rail clamp base, LONG length double socket arm and universal spring loaded X-Grip® cradle for 7" tablets. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
X-Grip® Cradle Dimensions
Minimum Width = 2.25"
Maximum Width = 5.75"
Depth = 0.875"
Specifications/Features:
Rustproof
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
RAM Highly Recommends adding a secondary tethering device for all open cockpit applications while using this product. The "U" in the part number reflects product packaged in poly bag.
|
84.79 |
|
|
Tough-Claw™ Base w/Long Double Socket Arm & Universal X-Grip® IV f/Large Phone/Phablet Cradle
The RAM-B-400-C-UN1 consists of the Tough-Claw™ rail clamp base, LONG length double socket arm and universal spring loaded X-Grip® cradle for 5" large phones and phablets. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your 5" phone or phablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
X-Grip® Cradle Dimensions
Minimum Width = 1.75"
Maximum Width = 4.5"
Depth = 0.875"
Specifications/Features:
Rustproof
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM highly recommends adding a secondary tethering device for all open cockpit applications while using this product.
Weight:
1.0 lbs.
|
77.92 |
|
|
RAM Flex Adhesive Base w/1" Ball
Part #: RAP-B-378U
Consists of a 2.5" composite base that connects to a 1" ball, double-sided adhesive PSA stick pad and sealed alcohol prep pad. This base will attach to all RAM double socket arms that will accommodate 1" ball bases.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. A secondary tether is recommended when this mount is used in high vibration environments.
|
12.34 |
|
|
Gas Tank Base with 1" Ball for Honda, Suzuki, KTM, Yamaha and Victory Motorcycles
The RAM® Mounts Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of your Honda, Suzuki, KTM, Yamaha and Victory motorcycles. We include the hardware you need to mount to the fill port as well.
Included Hardware:
Qty. 3 M6-1.0 x 25MM Socket Head Cap Screw
Qty. 4 M5-0.8 x 45MM Socket Head Cap Screw
Qty. 3 M5-0.8 x 35MM Socket Head Cap Screw
Qty. 3 M5-0.8 x 25MM Socket Head Cap Screw
Qty. 3 M5-0.8 x 20MM Socket Head Cap Screw
Qty. 3 M5-0.8 x 16MM Socket Head Cap Screw
Qty. 4 M5 Stainless Steel Flat Washer
Qty. 3 M6 Stainless Steel Flat Washer
Material:
Powder Coated Marine Grade Aluminum & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
28.57 |
|
|
Gas Tank Base with 1" Ball for BMW and Kawasaki Motorcycles
The RAM® Mounts Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of your BMW or Kawasaki motorcycles. We include the hardware you need to mount to the fill port as well.
Included Hardware:
Qty. 4 M5-0.8 x 40MM Socket Head Cap Screw
Qty. 3 M5-0.8 x 25MM Socket Head Cap Screw
Qty. 4 M5 Stainless Steel Flat Washer
Material:
Powder Coated Marine Grade Aluminum & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
31.72 |
|
|
RAM 1/4" NPT Female Threaded Hole Base w/Post & 2 1" Balls
Color: Black Powder Coat
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1 inch Rubber Ball
|
29.52 |
|
|
RAM 11mm Flat Base with Double Socket Arm and Diamond Adaptor (U)
The RAM-B-179U, offset motorcycle base, makes attaching to a variety of mounting locations, including handlebars, a breeze. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your mobile electronic device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. With a turn of a single comfortable to grasp knob, adjustments can be made and the sleek hourglass shape of the arm assembly compliments the lines of any motorcycle.
The RAM-B-252U, base for the RAM-B-179U, consists of a 1" diameter ball and 2.25" x 0.875 base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick).
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
29.40 |
|