RayNet to RJ45 Male Cable - 10M Part #: A80159 RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays. The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector. Features: 10M (32.81') RayNet to SeaTalkhs (RJ45) cable

RayNet to RJ45 Male Cable - 1m RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays. The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector. Features: 1m (3.28ft.) RayNet to SeaTalkhs (RJ45) cable The Raynet (F) to RJ45 Ethernet (M) adapter can be used to connect new a, c, e or gS-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch. When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a RJ45 radar scanner cable, DSM or thermal camera for direct-connection to an HS5 network switch, or MFD RayNet port.

RayNet (female) to RJ45 Male Cable - 3m RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays. The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector. Features: 3m (9.84 ft.) RayNet to SeaTalkhs (RJ45) cable

Raynet to RJ45 Female Adapter 100mm This adapter has a RayNet Female connector at one end, and a RJ45 Female Gland connector at the other end. The Gland makes the RJ45 Female socket watertight. A typical use for this cable would be to convert a RJ45 Digital Radar Cable to a RayNet Radar Cable so you can connect the cable directly into the new HS-5 Network Switch or directly into the back of an ace or gS Series multifunction display.

RayNet to RJ45 - 100' RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays. The RayNet connector is used for connecting network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector. Features: RayNet to RJ45 100'

Simrad adapter cable, Ethernet Yellow 5 pin male to RJ45 female 2 m (6.5 ft) *needed when hooking up a WM-2 to a NSE series

BlueNet™ Network to RJ45 Adapter Cable Use this adapter cable to connect your compatible third-party, OneHelm™ digital switching and Fusion® equipment, with an RJ45 port, to the Garmin BlueNet network.

RayNet Adapter Cable - 100mm - RayNet Male to RJ45 Raymarine's RayNet male to RJ45 adaptor cable. RayNet Raymarine’s current generation system replaces the RJ45 connector with a waterproof vibration tolerant twist pin connector that is designed for the marine environment.

10M RayNet to RayNet Cable for e & c Series

RayNet RA to RJ45 Cable - 100' RayNet Right Angle to RJ45 100' Cable

2M RayNet to RayNet Cable for e & c Series

5M RayNet to RayNet Cable for e & c Series

20M RayNet to RayNet Cable for e & c Series

Male Cable Raymarine's Male Cable for E-Series to Devicenet

SeaTalkng to DeviceNet Male Adapter Cable - 1M Adapts SeaTalkng to NMEA2000 network.