RAM 1" Diameter Ball with Custom GoPro Hero Adapter GoPro cameras have reinvented how we capture some of the most exciting moments in our lives. Nearly two decades ago, RAM began reinventing mounting systems so that enthusiasts could use their cameras and video equipment like never before. RAM is proud to offer a sleek new adapter that will bring two revolutionary product lines together and open up a world of possibilities. While the GoPro line of mounting accessories is nothing to scoff at, the diversity of the RAM product line is simply unmatched. Dream it. Live it. Capture it. RAM Mounting Systems and GoPro make it possible to truly "Be a HERO". The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Compatible GoPro Cameras: All HD HERO Original + HD HERO2 Professional Cameras Features: Patented rubber ball design dampens shock and vibration helping to extend the life of your camera Mount to many RAM double socket arms and mounts Multiple articulation and adjustment points for perfect viewing angles Lifetime warranty Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Flex Adhesive Base w/1" Ball Part #: RAP-B-378U Consists of a 2.5" composite base that connects to a 1" ball, double-sided adhesive PSA stick pad and sealed alcohol prep pad. This base will attach to all RAM double socket arms that will accommodate 1" ball bases. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. A secondary tether is recommended when this mount is used in high vibration environments.

RAM Lil Buddy™ Adhesive Stick Base Dash Mount with Compatible Garmin G-Ball Minimalists in design yet incredibly useful is the RAM Lil' Buddy mount. Using an adhesive disk, put the Lil' Buddy practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy. Deciding what you want to mount may be a tough decision though. With so many uses, your iPhone, Blackberry, Palm, or MP3 player can be perfectly matched and supported by your new best friend, the RAM Lil' Buddy. Also, for all you Garmin folks, note that the ball on the Lil' Buddy will snap right into the ball receiver on your GPS. The Lil' Buddy attaches directly to any Garmin GPS Personal Navigation Device with factory mounting bracket that accommodates the Garmin "G-Ball". This mount rotates 180 degrees. The RAM Lil' Buddy mount is compatible with the following Garmin GPS Personal Navigation Devices: nuvi 2xx nuvi 2xxW nuvi 3xx nuvi 6xx series nuvi 7xx series nuvi 8xx series StreetPilot i3 StreetPilot i5 Material: High Strength Composite Note: Purchase of product does not include Garmin GPS device or factory mounting bracket. The "U" in the part number reflects product packaged in poly bag.

RAM 2.5" Round Base w/1" Ball & 1/4"-20 Male Post Part #: RAM-B-202AU The RAM camera base contains a 1" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. Compatible Cameras: Contour GPS Contour HD Gobandit GPS-HD GoPro HD Helmet HERO GoPro HD Motorsports HERO GoPro HD Surf HERO GoPro Helmet HERO Wide GoPro Motorsports HERO GoPro Motorsports HERO Wide GoPro RC HERO GoPro Surf Hero GoPro Wide HERO Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

RAM Universal Medium Tough-Clamp with 1" Diameter Rubber Ball An extra pair of hands is something that almost everyone has wished for at some point. The RAM Tough-Clamp is the solution. This extremely versatile product from RAM has endless applications and will certainly become one of your most valued tools. The RAM Tough-Clamp includes a 1" ball which can be used to mount a variety of products utilizing RAM's vast selection of mounting solutions. Attach your GoPro Camera, Smartphone, RAM AQUA BOX Pro or similar light weight device on almost any flat surfaces and square rails. Clamping Dimensions: Flat surfaces and square rails from 0" to 1.75" thick Round rails from 0.75" to 1.125" OD Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Swiveling jaw-end pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes 1" rubber ball is compatible with numerous RAM arms and mounts Small, sleek form factor that accommodates for small, tight spaces Built-in lanyard holes Quick engage and release of clamp Lifetime Warranty! Made in U.S.A. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Standard Double Socket Arm, Long Double Socket Arm & Double Ball Adapter for 1" Balls Consists of a STANDARD LENGTH double socket arm, LONG LENGTH double socket arm and double ball adapter that joins the two arms together. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Standard Double Socket Arm Overall Length: 3.69" Long Double Socket Arm Overall Length: 6" Double Ball Adapter Ball Center to Ball Center: 1.75" Specs & Features Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag Weight:0.94lbs

Leash Plug Adapter w/1.5" Diameter Ball The 1.5" diameter ball leash plug adapter will attach to most SUP/surfboards, as well as after-market plugs. With the simple twist of the base, quickly secure the plug adapter to the board. Add a RAM arm or fishing rod/tube holder to complete your custom SUP mount. High strength composite and stainless steel construction assures a long life of trouble free use in a wide variety of environments including marine and salt water. Material: High Strength Composite & Stainless Steel Ball Size 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Universal X-Grip Cell Phone Holder w/1" Ball Part #: RAM-HOL-UN7BU Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle. Compatible Devices: Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone (1st Generation) Apple iPod touch (All Models) Apple iPod (G1-G5) All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts 4. Single socket technology allows for multiple adjustment angles and articulation of device Material: High Strength Composite with Rubber Tips Ball Size: 1" Rubber Ball "B" Size

Universal X-Grip® Holder w/1" Ball Base The RAM-B-202-UN9U consists of a composite spring loaded cradle, expandable grip arms, additional bottom support keepers and 1" ball base adapter. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-B-202-UN9U expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. The included 1" ball base includes hardware to attach directly to the back of the cradle and is compatible with all "B" size double socket arms. Please verify dimensions of your tablet below for compatibility with the X-Grip®. The X-Grip® holder is compatible with tablets devices that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size. Cradle Dimensions: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Maximum Length (using additional supports) = 10.25" Features: Spring loaded cradle expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Versatility of cradle allows for attachment to many 1" socket arms Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the cradle for quick release of your tablet Multiple mounting access points on the back of the cradle Additional support keeper at the bottom of the cradle Full access to all ports Lifetime warranty Made in the U.S.A. Material: Marine Grade Stainless Steel Components & High Strength Composite

RAM Seat Tough-Wedge with 1" Ball Base & Standard Length Double Socket Arm The RAM-B-407-201U consists of the Tough-Wedge™ and standard length double socket arm. The Tough-Wedge™ is a seat wedge mount that fits in the gap between the vehicle seat and center console; allowing easy access and operation of your mobile device. The Tough-Wedge™ can also be used for back-seat applications, inserted into the pockets located on the back of the front seats. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm. The standard length double socket arm measures 3.68" and will connect to all RAM cradles/adapters with a 1" ball. Tough-Wedge™ Dimensions: Length: 13.25" Height: 8.25" Depth: 1" Inside Wedge Depth: 0.375" - 0.875"

RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base w/ 1" Ball, Medium Arm and Diamond Ball Base Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/8" to 5/8” in diameter with a B-sized standard length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. Mounting Base Dimensions: Accommodates rails 3/8" to 5/8" in diameter  Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.56 lbs.

Flat Surface Mount w/1" Ball, including M6 X 30 SS HEX Head Bolt, f/Raymarine Dragonfly-4/5 & WiFish Devices The RAM-B-202-379-M616U consists of a 2.5" diameter round base with the universal AMPS hole pattern, STANDARD size double socket arm and 1" diameter ball, containing a M6 x 30 SS HEX head bolt. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The RAM-B-202-379-M616 reduces the mounting footprint, compared to old dragonfly units that contain a large neck. This mount allows for a seamless marriage of RAM components into your Raymarine system, opening up the ball and socket system and all of our mounting options to you. Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Raymarine device not included with purchase.

RAM 2" x 3" Rectangle Base w/1" Ball The RAM-B-202U-23 contains a 1" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.

RAM 2" x 4" Rectangle Base w/1" Ball The RAM-B-202U-24 contains a 1" diameter rubber ball connected at right angles to a 2" x 4" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.

RAM STACK-N-STOW Topside Base w/1" Ball The RAP-395W-BBU consists of a 1" ball, connected to a round base, that contains female grooves and hardware that will allow mounting to all RAM STACK-N-STOW Bait Boards. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.