|
RAM X-Grip II
Part #: RAM-HOL-UN8BU
Sometimes, its all about the design. If you are looking for a compact mount for your tablet without that cookie cutter shape, you've found it. The RAM X-Grip II has a clean and clever four leg design that sports great holding power without hiding your tablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip II is the tablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your tablet and become the most useful accessory in your vehicle.
The RAM-HOL-UN8BU consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BU expands and contracts for perfect fit of most 7" tablets.
Compatible Devices:
Amazon Kindle
Amazon Kindle Fire
Archos 7
Asus EEE Pad Memo
Barnes & Noble NOOKcolor
BlackBerry PlayBook
Dell Streak 7
HTC Flyer
Panasonic Toughpad JT-B1
Samsung Galaxy Tab (7" version)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 2.25"
(Devices 2.25" in width must be a minimum of 7" in height to fit)
Maximum Width = 5.75"
Depth = 0.875"
Features:
Spring loaded holder expands and contracts for perfect fit of your tablet
Rubber coated tips will hold your tablet firm and stable
Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts
Socket technology allows for multiple adjustment angles and articulation of your tablet
Easy access grip knobs, located on the back of the holder for quick release of your tablet
Material:
High Strength Composite with Rubber Tips
Ball Size:
1" Rubber Ball "B" Size
|
37.60 |
|
|
RAM Universal X-Grip Cell Phone Holder w/1" Ball
Part #: RAM-HOL-UN7BU
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite with Rubber Tips
Ball Size:
1" Rubber Ball "B" Size
|
27.29 |
|
|
RAM Universal X-Grip® II Tablet Holder with 1.5" Ball for 7'' Tablets including the iPad mini 1-3
The RAM-HOL-UN8BCU consists of a spring loaded holder and 1.5" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BCU expands and contracts for perfect fit of most 7" tablets.
The X-Grip® holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Holder Dimensions:
Minimum Width = 2.25"
Maximum Width = 5.75"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of holder allows for attachment to many RAM 1" socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the holder for quick release of your tablet
6. Rustproof
7. Lifetime warranty
8. Made in U.S.A.
Material:
Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1.5" Rubber Ball Size
|
45.20 |
|
|
RAM® X-Grip® Phone Mount for Wheelchair Armrests
This kit includes a B size RAM® diamond ball base with a universal hardware pack that accommodates the armrest on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included long double socket arm, double ball adapter, and medium double socket arm, connect and adjust the RAM® X-Grip® universal phone holder to your ideal position. The popular, spring-loaded RAM® X-Grip® provides a perfect fit for a wide variety of phones.
Specifications:
Cradle Dimensions:
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Included Mounting Hardware:
(QTY. 2) #10-32 x 1/2" Machine Screw
(QTY. 2) #10-32 T-Nut (3/8" x 5/8")
(QTY. 2) #10-32 T-Nut (1/2" x 1")
(QTY. 2) M4 x 12mm Machine Screw
(QTY. 2) M4 x 20mm Machine Screw
(QTY. 2) M4 Stainless Steel Washer
(QTY. 2) M4 Nylock Nut
Material: Powder Coated Marine Grade Aluminum
Ball Size: B Size 1" Rubber Ball
|
86.65 |
|
|
RAM® X-Grip® Phone Mount for Wheelchair Seat Tracks
This kit includes a B size RAM® diamond ball base with a universal hardware pack that accommodates the seat track on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included short single socket arm, 9" pipe extension, and medium double socket arm, connect and adjust the RAM® X-Grip® universal phone holder to your ideal position. The popular, spring-loaded RAM® X-Grip® provides a perfect fit for a wide variety of phones.
Specifications:
Cradle Dimensions:
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Included Mounting Hardware:
(QTY. 2) #10-32 x 1/2" Machine Screw
(QTY. 2) #10-32 T-Nut (3/8" x 5/8")
(QTY. 2) #10-32 T-Nut (1/2" x 1")
(QTY. 2) M4 x 12mm Machine Screw
(QTY. 2) M4 x 20mm Machine Screw
(QTY. 2) M4 Stainless Steel Washer
(QTY. 2) M4 Nylock Nut
Material: Powder Coated Marine Grade Aluminum
Ball Size: B Size 1" Rubber Ball
|
72.00 |
|
|
Universal X-Grip® Holder w/1" Ball Base
The RAM-B-202-UN9U consists of a composite spring loaded cradle, expandable grip arms, additional bottom support keepers and 1" ball base adapter. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-B-202-UN9U expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. The included 1" ball base includes hardware to attach directly to the back of the cradle and is compatible with all "B" size double socket arms. Please verify dimensions of your tablet below for compatibility with the X-Grip®.
The X-Grip® holder is compatible with tablets devices that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size.
Cradle Dimensions:
Minimum Width = 6.25"
Maximum Width = 8.1"
Depth = 0.875"
Maximum Length (using additional supports) = 10.25"
Features:
Spring loaded cradle expands and contracts for perfect fit of your tablet
Rubber coated tips will hold your tablet firm and stable
Versatility of cradle allows for attachment to many 1" socket arms
Socket technology allows for multiple adjustment angles and articulation of your tablet
Easy access grip knobs, located on the back of the cradle for quick release of your tablet
Multiple mounting access points on the back of the cradle
Additional support keeper at the bottom of the cradle
Full access to all ports
Lifetime warranty
Made in the U.S.A.
Material:
Marine Grade Stainless Steel Components & High Strength Composite
|
79.69 |
|
|
RAM 2.5" Composite Round Base w/1" Ball
Part #: RAP-B-202U
The RAP-B-202U contains a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
6.29 |
|
|
RAM 2" x 2.25" Rectangle Base with 1" Ball
The RAM-B-202U-225 contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.
|
13.33 |
|
|
RAM STACK-N-STOW Topside Base w/1" Ball
The RAP-395W-BBU consists of a 1" ball, connected to a round base, that contains female grooves and hardware that will allow mounting to all RAM STACK-N-STOW Bait Boards.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
6.19 |
|
|
RAM Stainless Steel U-Bolt Base w/1" Ball
The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 1" to 1.25" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt.
U-Bolt Dimensions:
Accommodates rails from 1" to 1.25" in diameter.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. If you prefer the RAM (RAM-B-231ZU) zinc coated u-bolt motorcycle handlebar base, click here.
|
13.21 |
|
|
RAM® X-Grip®Wheelchair Seat Track Mount for 9"-10" Tablets
This kit includes a C size RAM® diamond ball base with a universal hardware pack that accommodates the seat track on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included short single socket arm, pipe extension, and double socket arm, connect the RAM® X-Grip® universal holder for 9”-10” tablets. The spring-loaded RAM® X-Grip® provides a perfect fit for your tablet and can be easily adjusted to the ideal position.
Specifications:
Cradle Dimensions:
Minimum Width = 6.25"
Maximum Width = 8.1"
Depth = 0.875"
Maximum Length (using additional supports) = 10.25"
Included Mounting Hardware:
(QTY. 2) #10-32 x 1/2" Machine Screw
(QTY. 2) #10-32 T-Nut (3/8" x 5/8")
(QTY. 2) #10-32 T-Nut (1/2" x 1")
(QTY. 2) M4 x 12mm Machine Screw
(QTY. 2) M4 x 20mm Machine Screw
(QTY. 2) M4 Stainless Steel Washer
(QTY. 2) M4 Nylock Nut
Material: Powder Coated Marine Grade Aluminum & High Strength Composite
|
90.00 |
|
|
X-Grip® Dashboard Mount with Backing Plate for 9"-10" Tablets
The RAM® X-Grip® universal holder for 9"-10" tablets features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Included are easy-access grip knobs located on the back of the holder for quick release of your tablet. No matter what double socket arm and mounting base you pair the RAM® X-Grip® with, RAM® ball and socket technology allow for near-infinite adjustability to achieve the ideal viewing angle while also extending the life of your tablet by providing shock and vibration damping.
The RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allow for almost infinite adjustment and perfect viewing angles.
Features:
Spring-loaded 'X' design with rubber caps sports great holding power without obstructing your tablet; fits most 9 in. -10 in. tablets
Drill-down mounting solution; choose either round plate featuring the AMPS hole pattern for attachment to compatible device holders
2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases
Made of high-strength composite and steel components for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers
Holder Dimensions (inch): Max Height: 10.25" (using optional supports), Width Range: 6.25" - 8.1", and Max Depth: .875"
Socket to Socket Length (inch): 2.5”
Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter
Plate Size (inch): 2.5" Diameter
Ball Size (inch): C size (1.5”)
Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs.
Materials: Marine-grade aluminum and high-strength composite
Weight: 2.42 lb.
Compatible Devices:
Amazon: Fire HD 10
Apple: iPad (1st Generation), iPad (3rd Generation), iPad (4th Generation), iPad (5th Generation), iPad (6th Generation), iPad (7th Generation), iPad (8th Generation), iPad (9th Generation), iPad (10th Generation), iPad 2, iPad 9.7 (2017), iPad 9.7 (2018), iPad Air, iPad Air 2, iPad Air 3, iPad Air 4, iPad Air 5, iPad Pro 9.7 (1st Generation), iPad Pro 10.5 (2nd Generation), iPad Pro 11", iPad Pro 11" (2020), iPad Pro 11" (2021), and iPad Pro 11" (2022)
ASUS: MeMO Pad FHD 10, Transformer Pad, ZenPad 10, ZenPad 3S 10, and ZenPad Z10
Dell: Venue 10 7000, Venue 11 Pro, and Venue 11 Pro 7000
Google: Nexus 10 and Pixel C
HP: ElitePad 900, ElitePad 900 G1, Pro 610, and Pro Slate 10.1
Huawei: MediaPad M2 10.0, MediaPad M3 Lite 10.0, and MediaPad T3 10
Lenovo: Miix 3, Tab P12 Pro, S6000, Tab 2 A10-70, Tab 4 10, Tab 4 10 Plus, Tab A10, Tab3 10 Business, ThinkPad 10, ThinkPad Tablet 2, Yoga Book, Yoga Tab 3 10, Yoga Tab 3 Pro, Yoga Tablet 10, Yoga Tablet 10 HD+, and Yoga Tablet 2 (10 inches)
LG: G Pad 10.1, G Pad II 10.1, G Pad X 10.1, and G Pad X II 10.1
Microsoft: Surface 2, Surface Pro, Surface Pro 2, Surface Go, and Surface Go 2
Nokia: T21
Samsung: Galaxy Book 10.6, Galaxy Tab 10.1, Galaxy Tab 2 10.1, Galaxy Tab 3 10.1, Galaxy Tab 4 10.1, Galaxy Tab A 9.7, Galaxy Tab A 10.5, Galaxy Tab A8 10.5, Galaxy Tab Active Pro, Galaxy Tab Active4 Pro, Galaxy Tab Pro 10.1, Galaxy Tab S 10.5, Galaxy Tab S2 9.7, Galaxy Tab S3 9.7, Galaxy Tab S4 10.5, Galaxy Tab S5e, Galaxy Tab S6, Galaxy Tab S7, Galaxy Tab S7 FE, Galaxy Tab S7 Plus, Galaxy Tab S8, and Galaxy Tab S8 Plus
Sony: Vaio Tap 11, Xperia Tablet S, and Xperia Tablet Z
Vankyo: MatrixPad Z4 10"
Zebra: ET50 10" and ET55 10"
|
123.79 |
|
|
RAM Composite Twist Lock Suction Cup Mount with Universal X-Grip Cell Phone Holder
The RAP-B-166-2-UN7U consists of a 2.75" twist lock suction cup base, double socket system and universal spring loaded X-Grip holder for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
Spring loaded holder expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite and Rubber Tips
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
43.80 |
|
|
RAM Universal X-Grip IV Large Phone/Phablet Holder with 1" Ball
The X-Grip IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the X-Grip IV is the phablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phablet and become the most useful accessory in your vehicle.
Compatible Devices:
HTC Droid DNA
Huawei Ascend P1
LG Intuition
Nokia Lumia 920
Pantech Vega No. 6
Samsung GALAXY Note II
Samsung GALAXY S III
The X-Grip IV holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Holder Dimensions:
Minimum Width = 1.75"
Maximum Width = 4.5"
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded holder expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Versatility of holder allows for attachment to many RAM ball mounts
6. Lifetime warranty
Material:
High Strength Composite & Stainless Steel
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
30.38 |
|
|
RAM® X-Grip® Large Phone Holder with Ball & Vibe-Safe™ Adapter
The RAM® X-Grip® Large Phone Holder with Ball & RAM® Vibe-Safe™ Adapter (RAM-HOL-UN10B-462) is a combination of the classic RAM® X-Grip® device holder and the RAM® Vibe-Safe™—RAM's vibration damping accessory is designed to protect electronic devices from a wide range of vibration frequencies. The RAM® X-Grip® can rotate between portrait and landscape by loosening the center screw. It is compatible with B-size RAM® components, making it easy to upgrade the current mounting solution.
This product comes with an optional device tether that is recommended for outdoor applications. The holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of the handheld device with a case, sleeve, or skin when determining the overall size.
Features:
RAM® Vibe-Safe™ dampens a wide range of vibration frequencies
Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments
Unique structure and thoughtfully designed with all industries in mind
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware, (1) Optional Tether, (1) Glue Tube for Rubber Caps
Holder Dimensions: Width Range: 1.75" - 4.5", Depth Range: .875" max
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb
Materials: High-strength composite and stainless steel
Packaging Type: Retail Bag
Weight: 0.44 lbs
Compatible Devices:
Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, iPhone 14 Pro Max, iPhone 15, iPhone 15 Plus, and iPhone 15 Pro Max
Blackberry: Evolve X
Blackview: BV9900 and BV9900 Pro
Cat: S42, S62, and S62 Pro
Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, and RV 770 LMT-S
Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, Pixel 7 Pro, and Pixel 8 Pro
HTC: Bolt and U Ultra
Huawei: Mate 20 X
Kyocera: DuraSport 5G
LG: Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, and X venture
Magellan: TR5 and TR7
Motorola: moto e4 plus, moto g4, moto z2, moto z2 play, and moto z3
Rand: McNally Road Explorer 5 and McNally TND 540
Razer: Phone 2
Samsung: Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, and Galaxy S23 Ultra
Social: Mobile Rhino C6
Sonim: RS60
Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, and Xperia XZ Premium
|
59.82 |
|