Universal X-Grip® Holder w/1" Ball Base The RAM-B-202-UN9U consists of a composite spring loaded cradle, expandable grip arms, additional bottom support keepers and 1" ball base adapter. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-B-202-UN9U expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. The included 1" ball base includes hardware to attach directly to the back of the cradle and is compatible with all "B" size double socket arms. Please verify dimensions of your tablet below for compatibility with the X-Grip®. The X-Grip® holder is compatible with tablets devices that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size. Cradle Dimensions: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Maximum Length (using additional supports) = 10.25" Features: Spring loaded cradle expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Versatility of cradle allows for attachment to many 1" socket arms Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the cradle for quick release of your tablet Multiple mounting access points on the back of the cradle Additional support keeper at the bottom of the cradle Full access to all ports Lifetime warranty Made in the U.S.A. Material: Marine Grade Stainless Steel Components & High Strength Composite

Double U-Bolt Base w/1" Ball f/Rails from 0.75" to 1.25" Diameter The RAM-B-235U consists of a double u-bolt base with 1" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 0.75" to 1.25" in diameter.

Small Tough-Claw™ Base w/1" Ball & M6 x 30 SS Hex Head Bolt f/Raymarine Dragonfly-4/5 & WiFish The RAM-B-400-379-M616U consists of the Tough-Claw™ rail clamp base, STANDARD length double socket arm and 1" diameter ball, containing a M6 x 30 SS HEX head bolt. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The RAM-B-400-379-M616U reduces the mounting footprint, compared to old dragonfly units that contain a large neck. This mount allows for a seamless marriage of RAM components into your Raymarine system, opening up the ball and socket system and all of our mounting options to you. Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" Specifications/Features: Rustproof Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime warranty Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Raymarine device not included with purchase.

2" x 2.5" Diameter Base w/1" Ball The RAP-B-202U-225, high strength composite flat surface base, contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.

RAM 2" x 5" Bse w/1-1/2" Ball The RAM-202U-25 contains a 1" diameter rubber ball connected at right angles to a 2" x 5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.

RAM STACK-N-STOW Topside Base w/1" Ball The RAP-395W-BBU consists of a 1" ball, connected to a round base, that contains female grooves and hardware that will allow mounting to all RAM STACK-N-STOW Bait Boards. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Stainless Steel U-Bolt Base w/1" Ball The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 1" to 1.25" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt. U-Bolt Dimensions: Accommodates rails from 1" to 1.25" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. If you prefer the RAM (RAM-B-231ZU) zinc coated u-bolt motorcycle handlebar base, click here.

RAM Motorcycle Fork Stem Base with 1" Ball The RAM fork stem mount is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5 degrees to 1.10 degrees at the following intervals: Metric Standard 12mm .5 degrees 14mm .55 degrees 16mm .63 degrees 18mm .71 degrees 20mm .79 degrees 28mm 1.10 degrees Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. RAM recommends that you review the installation instructions for this part prior to ordering.

Torque™ 1-1/2" - 2" Diameter Rail Base with 1" Ball The RAM Torque™ Rail Base accommodates rails and bars ranging from 1.5” to 2” in diameter – the perfect mounting solution for your ATV or UTV. The include B size hex ball adapter can connect to either side of the Torque base, and is suitable for rugged environments for supporting action cameras, spotlights or other devices. Two sizing inserts – one for attachment to 1.5” rails and the other for attachment to 1.75” rails – are included to create a tight hold while nylon-insert locknuts prevent loosening in high-vibration environments. Available separately, the RAM B Size Ball Add-On allows you to attach an additional B Size Ball to the Torque™ Rail Base for mounting multiple devices. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in a poly bag.

RAM Dual Articulating Suction Cup Base with 1" Ball Base RAM Suction Cups are regarded as one of the most impressive suction cups in the world. Their incredible holding power is surprising when considering how most suction cups function. When two suction cups are used together the performance is amazing. The RAM Dual Articulating Suction Cup is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Whether you are mounting to a curved surface on a vehicle, or a curved windshield, this product is the ideal solution for secure suction cup mounting. Features: Customize mounting position for convex and concave surfaces by repositioning suction cup bases Dual suction cups provide extra strength and stability for devices up to 5 lbs. Commercial grade product for unparalleled performance Dual suction cups for redundancy High strength materials maximize longevity of the mount Ball and socket mounting system offers ease of adjustment product adjustment Lifetime warranty Made in U.S.A. Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Motorcycle Brake/Clutch Reservoir Cover Base with 1" Ball Centered The RAM-B-345U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball centered. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base w/ 1" Ball, Medium Arm and Diamond Ball Base Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/8" to 5/8” in diameter with a B-sized standard length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. Mounting Base Dimensions: Accommodates rails 3/8" to 5/8" in diameter  Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.56 lbs.

RAM Chrome Motorcycle Brake/Clutch Reservoir Base w/1" Ball The RAM-B-309-1CHU connects to your handlebar clutch/brake clamp, left or right side, and holds one 1" diameter mounting ball. The chrome base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1CHU base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58". Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Composite 3.25" Diameter Suction Cup Base w/1" Ball The RAP-B-224-1U, composite twist lock mount consists of a 3.25" rubber base that is connected to the (RAP-B-238U), diamond base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface. Features: Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size

RAM Zinc Coated U-Bolt Base with 1" Ball The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt. U-Bolt Dimensions: Accommodates rails from 0.5" to 1.25" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size