Large 800W XXXHEAT Boat Bilge & RV Heater This Xtreme boat bilge and RV heater is suitable for boats up to 35' in length and medium RV compartments. Features: True forced air heating circulates air more effectively and heats it more evenly for more accurate climate control The automatic thermostat turns the heater on at 40°F and off at 55°F +/-3° - the tightest tolerance available Failsafe Design cannot overheat (heating technology is dynamic and self-regulating) High Efficiency Xtreme produces heat faster, circulates more air, and shuts off earlier A pre-wired 15 ft. marine-rated power cord with a 110V 3 prong plug eases installation Designed for durability and reliability Complete protection (fully anodized inside and out) Small footprint Certified and independently tested now with the UL 1278 standard Specifications: Wattage: 800W BTU: 2729.7 Inrush (startup) Current: 14A, 1 sec. Typical Operating Current: 6.5A Fan Flow: 40 CFM Heater Dimensions (inch): 8″ x 3.5″ x 5-1/8″ Fuse Size Required: 20A Power Cord: 15 ft. marine-rated power cord

Small 400W XHEAT Boat Bilge & RV Heater This Xtreme boat bilge and RV heater is suitable for boats up to 24' in length and small RV compartments. Features: True forced air heating circulates air more effectively and heats it more evenly for more accurate climate control The automatic thermostat turns the heater on at 40°F and off at 55°F +/-3° - the tightest tolerance available Failsafe Design cannot overheat (heating technology is dynamic and self-regulating) High Efficiency Xtreme produces heat faster, circulates more air, and shuts off earlier A pre-wired 15 ft. marine-rated power cord with a 110V 3 prong plug eases installation Designed for durability and reliability Complete protection (fully anodized inside and out) Small footprint Certified and independently tested now with the UL 1278 standard Specifications: Wattage: 400W BTU: 1365 Inrush (startup) Current: 8.2 A, 1 sec. Typical Operating Current: 4. A Fan Flow: 40CFM Heater Dimensions (inch): 5.75″ x 3.5″ x 5-1/8″ Fuse Size Required: 15A Power Cord: 15 ft. marine-rated power cord

Medium 600W XXHEAT Boat Bilge & RV Heater This Xtreme boat bilge and RV heater suit boats up to 28' in length and medium RV compartments. Features: Accurate forced air heating circulates air more effectively and heats it more evenly for more accurate climate control The automatic thermostat turns the heater on at 40°F and off at 55°F +/-3° - the tightest tolerance available Failsafe Design cannot overheat (heating technology is dynamic and automated) High Efficiency Xtreme produces heat faster, circulates more air, and shuts off earlier A pre-wired 15 ft. marine-rated power cord with a 110V 3 prong plug eases installation Designed for durability and reliability Complete protection (fully anodized inside and out) Small footprint Certified and independently tested now with the UL 1278 standard Specifications: Wattage: 600W BTU: 2047.3 Inrush (startup) Current: 12A 1 sec. Typical Operating Current: 5.5 A Fan Flow: 40 CFM Heater Dimensions (inch): 8″ x 3.5″ x 5-1/8″ Fuse Size Required: 15A Power Cord: 15 ft. marine-rated power cord

Boat, Cabin, & RV Heater This Xtreme boat and cabin heater is designed to help keep your boat cabin, RV, or other small space comfortable during the fall and winter months.  This heater features quiet operation, a low profile, and a stable base that prevents tipping. Drawing air from the top, this heater can be placed up against walls or on carpeted surfaces without blocking the air intake. The 1500-watt heat setting will quickly warm your living space, while the 750-watt setting will efficiently maintain comfortable temperatures. The 6 ft. power cord offers more flexibility for heater placement independent of outlet locations.  Features: Built-in overheat protection "One Shot" secondary overheat protection Two heat settings: 750/1500 and 1500 watts Freeze prevention thermostat setting Fan-only setting Automatic thermostat 6 ft. power cord UL Listed to UL 1278 standards Specifications: Color: White/black Wattage: Low: 750 / High: 1500 Amps: Low: 6.25 / High: 12.5 Voltage: 120V Dimensions (inch): 10″ L x 10-1/4" W x 4-3/4"  H Cord Length: 6 ft. Weight: 5lbs

Newbury, Massachusetts, April 15th, 2010: Technology changes rapidly and as a company building WiFi equipment, Island Consulting strives to offer the best. Since the beginning, Island Consulting has continuously made improvements to The Wirie, a long range WiFi solution for boats and RVs. The most recent development in creating a better product involves a high-end marine grade WiFi antenna. To achieve this goal, Island Consulting partnered with the well-known US antenna manufacturer, L-com.   L-com, a leading antenna manufacturer in the wireless connectivity business for over 27 years, agreed to produce a marine grade antenna exclusively for The Wirie. Designed to stringent specifications, the new Wirie antenna is an 8dBi omni-directional high performance marine antenna that features sealed collinear brass elements inside a durable UV-stable white fiberglass radome. The sealed end cap ensures no water entry and drain holes in the base help prevent moisture build-up inside the antenna.   The collaboration between Island Consulting and L-com offers the consumer an economical alternative to other true marine grade WiFi devices currently on the market.  “We believe our partnership with L-com has allowed us to turn The Wirie into the most durable and best long range WiFi solution available for boats and RVs”, states Mark Kilty from Island Consulting.  According to Karl Blomgren, L-Com's Product Manager, “L-Com is always interested in working with customers, like Island Consulting, to optimize our antennas for their applications to support new product enhancements.” Additional information about The Wirie's new antenna can be viewed at www.thewirie.com/antennadetails.html.   For $250, The Wirie enhances the customers' ability to connect to the internet from the comfort of his/her own boat or RV. The Wirie continues to offer many unique features: flexible stainless steel mounting bracket, easy to install and use software, comprehensive user manual, powerful 1000mW WiFi adapter, IP67 waterproof box, and superior customer support. The Wirie is easy to upgrade as technology continues to advance. In addition to the new antenna, the warranty of The Wirie has been extended to 1 year. The 10-day money back guarantee is still in place. Through the joint effort between Island Consulting and L-com, The Wirie is a truly marine grade WiFi solution at an affordable price. For more information, please visit www.thewirie.com.   About The Wirie: Island Consulting located in Newbury, Massachusetts, USA, manufactures and distributes The Wirie.  The Wirie was invented in the Caribbean in April 2009 to provide a cost-effective, user-friendly, long range WiFi solution for boats and RVs. It was quickly expanded to a U.S. operation to allow a larger distribution.  Island Consulting is committed to continuous improvements and to making sure every customer is extremely satisfied. Website: www.thewirie.com   About L-com: Founded in 1982, L-com Global Connectivity is a privately held corporation in Massachusetts, USA, dedicated to the design and production of a wide range of interconnect products for the electronics and data communication industries. L-com places primary product emphasis on copper and fiber cable assemblies, wireless antennas and amplifiers and accessories for modular, coaxial and computer networking applications. In June 2007, L-com acquired HyperLink Technologies of Boca Raton, Florida, USA. Website: www.L-com.com   Contact: Liesbet Collaert liesbet@thewirie.com  http://www.thewirie.com   The Wirie can now be found at CLR Marine.   http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION   http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FAntennas   http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FMobile%20Broadband   http://www.clrmarine.com/m4_view_item.html?m4:item=0Wirie    

800W Heating Element for Sigmar Heater- 110V Made of Incoloy 11" Long 1-5/8" Diameter British threads 7-3/4" Long standard electrical anode rod

Large Swingback Back Boat Seat Cover - Vinyl White Keep your seats and consoles from cracking and fading! Boat seat and console covers are designed to protect your seats from damaging ultra-violet rays, wind, mildew and water. All Covers fold easily for storage and keep your seats cool and clean! Dimensions: 36"H x 40"W x 20"D Features: Mildew and water repellant UV Protection Waterproof Air vents Heavy duty Drawstring hem

Quick Release Bracket for 450W & 600W Heaters Install and Remove your Xtreme Heater FAST! Driven by customer demand, our quick-release bracket was designed specifically for your Xtreme heater and allows you to easily install and remove your heater(s) in seconds, without the need for tools. Using this bracket, your mounting options include locations you may not have considered due to concern for blocked access to other components in your tight engine space. For our customers who prefer to leave their heater(s) in place only during the winter months, THIS is the accessory you've been asking for. The quick-release bracket makes it simple to remove the heater for the boating season, leaving just the low-profile bracket installed and ready to go. When winter returns, lock it down, and plug it in! Features: Built Xtreme Tough, anodized aluminum construction will not corrode Provides easy off-season storage, for quick access to engine spaces Works on ALL Xtreme Heaters built after 2004 Quickly Install and Remove your Heater Without Tools! One Year Warranty

Premium Water Heater 5.8G - 120V Marine Premium Water Heater 22L (5,8 gal) 800W 120V, toxic free ceramic inside coating to ensure highest water quality over time Features: Heats up 22L (5,8 gal) in 1h, good for 35L of mixed warm water or a 3,5 minute shower Replaces common brands as Isotemp Toxic Free Ceramic Double coating Specifications: Weight: 10,5 kg/24 Lb Dimensions: 423/16.65L x 390/15.35H x 390/15.35W mm/in  *CE marked (LVD) directive 2006/95/EC, EN 60335-1 (2008), EN 60335-2-21 (02-2004), A1 (07-2005), EC (01-2008). (EMC) directive: 2004/108/EC, EN 55014-1 (1999), A1 (2000), A2 (2003), EN 55014-2 (1998), A1 (2002)

True North Deluxe 9206 120VAC High-Performance Space Heater - 600W, 900W & 1500W 600, 900, and 1500 watt electric space heater. Rugged, steel body construction. Dual overheat protection. This rugged AC electric heater keeps the cabin warm on the chilliest of those early and late season nights in the marina. The model 9206 True North AC heater was recognized by Powerboat Reports as being the best. There is no other heater on the market that delivers the performance and quality of the True North. Features: Steel construction 3 heat settings (600, 900, and 1500 Watt) Option of a 'fan only' setting Built-in thermostat Anti-freeze setting Low profile design Made in Canada 5-year warranty Benefits: Years of trouble-free use Extended boating season Greater on-board comfort Can use for 'no heat' air circulation Eliminate snow or frost build up on boat top Cannot tip over Easy to stow when not in use

FINISH THOMPSON A100855 STRAINER POLYPRO   Inlet Strainer - Prevents intake of objects or particulates. Part Number Construction Applicable Model A100855 Polypropylene PFP A100111 316 Stainless Steel PF, BT A100337 316 Stainless Steel TTS, TBS A100109 PVC/Polyethylene TTC

Clamp-On Rail Mounted Cup Holder - Large for Up to 2" Rail - White Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 1-1/2-inch to 2-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers. Features: The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 1-1/2-inch to 2-inch boat rails Compatibility: Fits most standard cups, cans, bottles and tumblers Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place Durable Construction: Constructed of a durable, UV-resistant polymer Color: White

Clamp-On Rail Mounted Cup Holder - Large for Up to 2" Rail - Grey Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 1-1/2-inch to 2-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers. Features: The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 1-1/2-inch to 2-inch boat rails Compatibility: Fits most standard cups, cans, bottles and tumblers Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place Durable Construction: Constructed of a durable, UV-resistant polymer Color: Grey

SHURflo RV-10UC-A, Filter Housing SHURflo Filter Housing Waterguard, Non-Bypass Model, 10 Inch, 3/4" FPT Ports, Includes One RV-10C1-A Cartiridge, Garden Hose Fittings, Wrench and Mounting Bracket

RealVision 3D™ Bronze Thru-Hull Transducer Pair Pack - 12° - 8M Cable & Y-Cable Designed for inboard or outboard boats, the RV-212 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-212 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-212 system also has a built-in fast response water temperature sensor for quick, accurate readings. Raymarine’s RV-212 Bronze Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 1° to 12°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-212 system works great on trailered boats too. The RV-212 system features rugged cast-bronze through hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2M pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10M (33'.) What’s in the Box? RV-212P Bronze Port Transducer with 2M cable RV-212S Bronze Starboard Transducer with 2M cable RealVision 3D Transducer Y-Cable RealVision 3D 8M (26') Transducer Extension Cable Anti-rotation bolt kit Installation instructions