|
12" Upper Flange Pole with D Size 75x75mm VESA Mount
This 12" Upper Flange Pole consists of a 12" upper pole, a D-size ball base, a medium-length double socket arm, and a D-size 75x75mm VESA Mount to connect with your device holder. Pair this upper pole with a RAM® vehicle base that is compatible with the specific vehicle, enabling a rugged mobile office setup.
Features:
Pair this 12" upper pole with any RAM® lower pole and vehicle base that are compatible with your specific vehicle
Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware
Socket-to-Socket Length (inch): 6.88”
Hole Pattern (inch): 75 x 75mm VESA
Ball Size (inch): D Size (2.25")
Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs
Materials: Powder-coated steel and marine-grade aluminum
Weight: 7.49 lb.
|
134.54 |
|
|
8" Upper Flange Pole with D Size 75x75mm VESA Mount
This 8" Upper Flange Pole consists of an 8" upper pole, a D-size ball base, a medium-length double socket arm, and a D-size 75x75mm VESA Mount to connect with your device holder. Pair this upper pole with a RAM® vehicle base that is compatible with a specific vehicle for a rugged mobile office setup.
Features:
Pair this 8" upper pole with any RAM® lower pole and vehicle base that are compatible with your specific vehicle
Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware
Socket-to-Socket Length (inch): 6.88”
Hole Pattern (inch): 75 x 75mm VESA
Ball Size (inch): D Size (2.25")
Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs
Materials: Powder-coated steel and marine-grade aluminum
Weight: 6.7 lb.
|
128.44 |
|
|
Double U-Bolt Base w/D Size 2.25" Ball for Rails from 1" to 1.25" in Diameter
The RAM-D-235U consists of a double u-bolt base with 2.25" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 0.75" to 1.25" in diameter.
HARDWARE INCLUDED
(2) 1/4"-20 U-Bolts for 1" - 1.25" Rails
(4) 1/4"-20 Nylock Nuts
(4) Rubber Caps
CLAMP RANGE
1" - 1.25" diameter
BALL SIZE
D Size (2.25")
WEIGHT CAPACITY
Standard Use: 6 lbs
Heavy-Duty Use: 5 lbs
Note:
The "U" in the part number reflects product packaged in poly bag. This mount includes stainless steel u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt.
Weight:
0.86 lbs
|
35.60 |
|
|
Forklift Overhead Guard Plate with D Size 2.25" Ball
Sometimes the simplest solution makes the most sense. The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard. Utilizing two identical plates of stamped steel with numerous common hole patterns and slots makes attachment a breeze. Three popular ball sizes: 1.5", 2.25 & 3.68" diameter may be attached to this plate system. Up to 2 balls may be attached to the same plate for multiple applications.
Features:
Hole Patterns:
AMPS 4-Hole Pattern
100 x 100 VESA Pattern
75 x 75 VESA Pattern
Installation is as easy as attaching the base with ball to one of the plates and then sandwiching the guard or cage between the two mounting plates using the hardware provided.
Material: Powder Coated Marine Grade Aluminum
Weight: 8.6 lbs.
|
111.41 |
|
|
Double U-Bolt Base with D Size 2.25" Ball for Rails from 1.25" - 1.5" in Diameter
The RAM-D-235-1U consists of a double u-bolt base with 2.25" diameter ball and two zinc-coated u-bolts. The double u-bolt base will accommodate rails from 1.25" to 1.5" in diameter.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" D-Size Ball
Note: The "U" in the part number reflects product packaged in poly bag. This mount includes zinc coated u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt.
Weight: 0.54 lbs.
|
33.78 |
|
|
RAM Mount Large Tough-Claw Base w/Double Socket Arm & 1.5" Round Base A
dapter
The RAP-401-202U consists of the large Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™: is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 2.25" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
1" to 2.25"
Clamping Range (Flat Surfaces):
0" to 2.2"
|
84.79 |
|
|
50mm x 100mm Half VESA Plate Adapter with D Size 2.25" Ball
The RAM-D-243U consists of a 2.25" diameter rubber ball, connected at right angles to a square 2.81" x 5" plate.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 0.8 lbs.
|
33.00 |
|
|
Forklift Overhead Guard Plate with C Size 1.5" Ball
Sometimes the simplest solution makes the most sense. The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard. Utilizing two identical plates of stamped steel with numerous common hole patterns and slots makes attachment a breeze. Three popular ball sizes: 1.5", 2.25 & 3.68" diameter may be attached to this plate system. Up to 2 balls may be attached to the same plate for multiple applications.
Features:
Hole Patterns:
AMPS 4-Hole Pattern
100 x 100 VESA Pattern
75 x 75 VESA Pattern
Installation is as easy as attaching the base with ball to one of the plates and then sandwiching the guard or cage between the two mounting plates using the hardware provided.
Material: Powder Coated Marine Grade Aluminum
Weight: 7.85 lbs.
|
97.74 |
|
|
RAM 12" Long Top Male Tele-Pole
The RAM upper Tele-Pole, 12" male pole, contains a swing arm connection point that will attach directly to any double swing arm system with 1.5" Socket. The male post is 12" long and has a diameter of 1.328".
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag.
|
34.94 |
|
|
12" Long Lower Female Tele-Pole
The RAM Tele-Pole 12" tall female tube base has a square plate base that will connect to many of the RAM-VB No-Drill™ and Drill plate bases, as well as RAM-VP-TTMXX and RAM-VP-TTMFXX top tele-poles™. The female post is 12" tall and has a 1.375" diameter.
Material:
Powder Coated Marine Grade Aluminum
|
22.37 |
|
|
RAM 12" Long Double Swing Arm with Open Swivel Single Socket
The RAM-VB-110-4U consists of two 6" long single swing arms, Tele-Pole connection hole and swivel single socket that will accommodate 1.5" ball bases. The two swing arms connect with a bolt and knob system. With a simple turn of the knob you can pivot the swing arms at this center point and the tighten the knob to lock the arms in place. The swivel single socket arm allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. Easily incorporated into numerous RAM systems, this rotating swing arm is available with the standard 1.5 inch ball size or the heavy duty 2.25 inch ball size.
Swing Arm Length:
12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
59.90 |
|
|
RAM 14" Long Extension Pole with 1" and 1.5" Single Open Sockets
The RAP-CB-201-14U consists of a SHORT extension pole and 1" and 1.5" ball single open sockets. The socket ends can swivel 360 degrees; this allowing for you to rotate your camera adapter in any direction.
Dimensions:
Pole Length (Socket End to Socket End): 14"
Features:
1. Extension poles are buoyant, will float if dropped in the water
2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications
3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use
4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch
5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments
6. Lifetime warranty
7. Made in USA
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
23.15 |
|
|
RAM 18" Long Extension Pole with 1" and 1.5" Single Open Sockets
The RAP-CB-201-18U consists of a LONG extension pole and 1" and 1.5" ball single open sockets. The socket ends can swivel 360 degrees; this allowing for you to rotate your camera adapter in any direction.
Dimensions:
Pole Length (Socket End to Socket End): 18"
Features:
1. Extension poles are buoyant, will float if dropped in the water
2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications
3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use
4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch
5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments
6. Lifetime warranty
7. Made in USA
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
28.12 |
|
|
RAM 14" Long Extension Pole with 2 1" Diameter Ball Ends, and Double Socket Arm
The RAP-BB-230-14-201U consists of a SHORT extension pole with (2 qty) 1" diameter ball ends and double socket arm.
Dimensions:
Overall Length (Arm Socket to Ball End): 14"
Pole Length (Ball End to Ball End): 12.75"
Features:
1. Extension poles are buoyant, will float if dropped in the water
2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications
3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use
4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch
5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments
6. Lifetime warranty
7. Made in USA
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
21.56 |
|
|
RAM 18" Long Extension Pole with (2 qty) 1" Diameter Ball Ends, and Double Socket Arm
The RAP-BB-230-18-201U consists of a LONG extension pole with (2 qty) 1" diameter ball ends and double socket arm.
Dimensions:
Overall Length (Arm Socket to Ball End): 18"
Pole Length (Ball End to Ball End): 16.75"
Features:
1. Extension poles are buoyant, will float if dropped in the water
2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications
3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use
4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch
5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments
6. Lifetime warranty
7. Made in USA
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
26.04 |
|