500W Heating Element for Nautic B3 Heaters - 110V Made of Incoloy 11" Long 1-5/8" Diameter British threads 7-3/4" Long standard electrical anode rod

1200W Heating Element for B3 & Sigmar Heaters - 110V Made of Incoloy 11" Long 1-5/8" Diameter British threads 7-3/4" Long standard electrical anode rod

800W Heating Element for Sigmar Heater- 110V Made of Incoloy 11" Long 1-5/8" Diameter British threads 7-3/4" Long standard electrical anode rod

Gianneschi 03BRES2 Heating Element 1.5Kw Water heater resistor 1500 Watts 220 Volts

Heating Element with Gasket The WH1A-S is a screw in heating element that is 1250w at 120v designed to quickly and efficiently heat the water via electricity in a Raritan water heater. These elements must be installed, and the tank filled prior to applying any power or they will burn out. Raritan does offer an element that can last a bit longer if power is applied without water in the tank. Features: Includes Gasket Screw-In Type 120v WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quick Pressure Relief Valve for All Sigmar & B3 Heaters Pressure Relief Valve - 1/2" fitting, brass chrome plated, pressured up to 6 bars Bristish standard thread fitting Overall length 1-3/4" Relief/non return that allows discharging of the water heater in case of disuse

Heating Element w/Gasket - Bolt-On Type - 120v The WH1A-S is a screw in heating element that is 1250w at 120a designed to quickly and efficiently heat the water via electricity in a Raritan water heater. These elements must be installed, and the tank filled prior to applying any power or they will burn out. Raritan does offer an element that can last a bit longer if power is applied without water in the tank. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gianneschi 03BRES3 3Kw Heating Element CE water heater resistance 3000Watts 220/380 Volts

Raritan WH1B Heating Element W/Gasket

Raritan WH1B-S Heating Element 240V

Gianneschi 03BRES5 5Kw Heating Element 5000 Watts 220/380 Volts Three-phase

Nautic Boiler B3 - 3.9 Gallon - 12V - 300W Casing in composite material and Tank in Aisi 316 stainless steel. Benefits: High quality materials Heat exchanger with wide exchange surface Produces hot water from the electric element, that is fitted with an adjustable safety thermostat Relief/non-return vale that allows discharging of the water heater in case of disuse Features: The heat exchanger used for Quick "Nautic Boiler B3” is AISI 316L stainless steel. The heat exchang capacity is notably higher than that achieved from other manufactures. The tank is made of 1.5 mm gauge AISI 316 stainless steel welded with Argon shielding gas and hence highly resistant to corrosive agents. The electrical heating element is made of Incoloy®. The thermal insulation is high density polyurethane foam injected between the cover and tank giving excellent heat retention properties. Included Accessories: Tank mounting brackets are in stainless steel AISI 316 and are supplied as standard in each package.

Nautic Boiler B3 - 5.3 Gallon - 12V - 300W Casing in composite material and Tank in Aisi 316 stainless steel. Benefits: High quality materials Heat exchanger with wide exchange surface Produces hot water from the electric element, that is fitted with an adjustable safety thermostat Relief/non-return vale that allows discharging of the water heater in case of disuse Features: The heat exchanger used for Quick "Nautic Boiler B3” is AISI 316L stainless steel. The heat exchang capacity is notably higher than that achieved from other manufactures. The tank is made of 1.5 mm gauge AISI 316 stainless steel welded with Argon shielding gas and hence highly resistant to corrosive agents. The electrical heating element is made of Incoloy®. The thermal insulation is high density polyurethane foam injected between the cover and tank giving excellent heat retention properties. Included Accessories: Tank mounting brackets are in stainless steel AISI 316 and are supplied as standard in each package.

Thermostatic Mixing Valve Kit for Nautic Boiler B3 A thermostatic mixing valve is a valve that blends hot water with cold water to ensure constant, safe shower and bath outlet temperatures, preventing scalding. The Quick thermostatic mixing valve is suited perfectly for the Quick and Sigmar brand of water heaters. This kit is sold complete with the valve, hose , and fittings. For use with Quick Nautic Boiler B3.

Stor-Dry 9406 110V Warm Air Circulator & Dehumidifier - 75W Low wattage warm air circulator. Prevents mold and mildew. Great for boat storage. The Stor-Dry low wattage warm air circulator is the "must-have" product for the winterization season. The model 9406 Stor-Dry combats mold, mildew, and musty odors in any boat that is closed up or winterized. This dual-action air dryer uses a low-wattage heating element and internal fan to both heat and circulates the air. The heat and circulation prevent stale air pockets which in turn prevent mold or mildew from forming on the interior surface of the boat. Features: Dual-action of fan and heating element Low power consumption of 90 watts Raises the ambient temperature above the dew point Corrosion-resistant aluminum Rugged construction Made in Canada 2-year warranty Benefits: Superior performance overheating element only products No maintenance required Effective in areas up to 1000 cubic feet Controls mold and mildew Ready to use out of the box Odor free boats Years of trouble free use