The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 6" Aft Angled Mount 6" tall Aft Raked 30 degrees

Vision Series Mount - 6" Aft Angled - Heavy Duty for Open Array Radars The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 6" Heavy Duty Aft Mount 6" Tall Aft raked 30 degrees

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 18" Aft Angled Mount 18" tall Aft Raked 30 degrees

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 12" Aft Angled Mount 12" tall Aft Raked 30 degrees

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 24" Aft Angled Mount 24" tall Aft Raked 30 degrees

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 36" Aft Angled Mount 36" tall Aft Raked 30 degrees

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 12" Heavy Duty Aft Mount 12" Tall Aft raked 30 degrees

APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft Leaning - Black The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual 

PT2004 - PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Composite PowerTower is engineered for outstanding strength with an unparalleled surface finish.  Manufactured using the best composite materials, PowerTower® is molded as a single structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO 20, 20+, 24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHRIP radar ICOM - MR-1010RII radar Intellian - FB150 in i3, FBR250 in i3, FBR250R in i3, i3 radars KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - 37STV, QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Sea-Tel - Coastal 14 radar Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Hollow stem allowing internal routing of all cables Watertight Installation - IP65 gland to seal cable entry into stem and a watertight base seal included so no need for messy sealant.  Ease of Install - the pre-drilled mounting holes, the antenna fastens to PowerTower top plate using its own mounting bolts.  Technical Specifications: Radar Type - Dome Material - Composite Height - 6.2"" (158mm) Mounting Type - Aft leaning - 30° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual 

SPT1001 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18 and 24, GMR18HD, 18xHD, 18HD+, GMR24HD and 24xHD, GMR40 radars Humminbird - HB2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Nobletec - 4KW radars Raymarine - QUANTUM (Q24C) and QUANTUM 2 (Q24D0, RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, 60, 64-S, GB40/NX40/45/NSE1/12 radars Sitex - RADARpc-4D Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual 

PT2005 - PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Composite PowerTower is engineered for outstanding strength with an unparalleled surface finish.  Manufactured using the best composite materials, PowerTower® is molded as a single structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D/DRSD4D-NXT, DRS4W, NavNet (18" and 24") radars Humminbird - AS 21 RD4KW radar Intellian - i1 radars Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000 radars Koden - 2kW 12" radar KVH - TracVision M1 and TV1 radars Lowrance - LRA-1800, RB714A, DX42, LRA-2400 HD radars Majestic - SATMAR32 radar Navman - 8000 Series (8084 and 8120) 18" radars Nobletec - 2kW - 20" radars Northstar - M Series 18" and 24"  8000i radars Raymarine - 33STV radars Seiwa - SWR-1, 8, 9 radars Simrad - GB40, NX40/45, NSE8/12, RB712A, DX42S, DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 Radars Features: Hollow stem allowing internal routing of all cables Watertight Installation - IP65 gland to seal cable entry into stem and a watertight base seal included so no need for messy sealant.  Ease of Install - the pre-drilled mounting holes, the antenna fastens to PowerTower top plate using its own mounting bolts.  Technical Specifications: Radar Type - Dome Material - Composite Height - 6.2"" (158mm) Mounting Type - Aft leaning - 30° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual 

APT-150-02 - Aluminum PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D/DRSD4D-NXT, DRS4W, NavNet (18" and 24") radars Humminbird - AS 21 RD4KW radar Intellian - i1 radars Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars Koden - 2kW 12" radar KVH - TracVision M1 and TV1 radars Lowrance - 3G/4G, LRA-1800, RB714A, DX42, LRA-2400 HD radars Majestic - SATMAR32 radar Navman - 8000 Series (8084 and 8120) 18" radars Nobletec - 2kW - 20" radars Northstar - M Series 18" and 24"  8000i radars Raymarine - 33STV radars Seiwa - SWR-1, 8, 9 radars Simrad - 3G/4G, GB40, NX40/45, NSE8/12, RB712A, DX42S, DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 Radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual 

SPT1002 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS 2D, 42DL, 42DL+, 4D, 4D-NXT, DRS4W, NavNet 18" and 24" Humminbird - AS 21RD4KW Inerphase - Mini RE-1, 8, 9 JRC 100, 100mk2, 1066, 1500, 1500mk2, 1800, 2000 Koden - 2kW 12" Lowrance - LRA-1800/RB714A/DX42 Navman - 8000 Series - 18" Seiwa - SWR-1, SWR-8, SWR-9 Simrad - GB40, NX4-/45, NSE8/12, RB712A, DX42S Sitex - MDS-1, 8, 9, 12, NKE-1066 Techmarine - T72.01, T72.02, T-72.04 Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

APT6003 Aluminum PowerTower® Open Array Radar Mount - 6" Aft Leaning  Scanstrut Aluminium PowerTower® has been designed and engineered to install your Open Array on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  Compatible with: Furuno - 1762, 1932, 1934, 1942, 1944, 1954, 851, DRS12A (6'), DRS12A (4'), DRS25A (4'), DRS25A (6'), DRS4A, DRS6A / DRS6A X CLASS, DRS6A-NXT radars Garmin - GMR 1224 xHD2, 1226 xHD2, 2524 xHD2, 2526 xHD2, 404, 406, 424 xHD2, 624 xHDS2, 626 xHD2 radars JRC - JMA 2344 / 5106 / 5206 (4') and JMA 2344 / 5106 / 5206 (6') radars Navman - 8000 Series (8084/8120) 4" radars Onwa - KRA-3002/4001 radars Raymarine - 5S / 9S / RA1048HD / RA1048SHD, 7S / 11S / RA1072HD / RA1072SHD, Cyclone 3'/4'/6', Magnum 4' 4kW/12kW, Magnum 6' 4kW/12kW radars Simrad - HALO 3/4/6 Pulse radars Sitex - MDS - 10 (4'), 10 (5') and RADARpc - 3/54.5 radars Features: Designed to fit the most up to date open array radars from Garmin, Raymarine, Simrad and Furuno Pre-drilled mounting holes allow the open array to fasten straight to the PowerTower® Constructed from the best marine-grade aluminium Paint finishes complies with our unique 4 step marine paint system Technical Specifications: Radar Type - Open Array Material - Aluminum  Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual