|
Battery Temperature Sensor (BTS)
Designed for use with TRUECharge2 battery chargers.
The BTS mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger or charge controller, which automatically adjusts voltage to help ensure full battery charge depending on the ambient temperature of your battery installation.
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
35.88 |
|
|
Battery Temperature Sensor (BTS) f/Freedom SW Series
The Battery Temperature Sensor (BTS) mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger or charge controller, which automatically adjusts voltage to help ensure full battery charge depending on the ambient temperature of your battery installation.
Features:
Gives charger proper temperature compensated charging
25 ft. (7.6m) communications cable
Compatible Devices:
Freedom SW 2000, 3000, 2000 24V, 3000 24V
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
24.07 |
|
|
Battery Temperature Sensor (BTS) for Freedom 458 Series
The Battery Temperature Sensor (BTS) is a replacement BTS designed for the Freedom 458 inverter/charger series. The sensor has a 15 foot cable attached and it mounts on a terminal post of a battery in a bank or on the side of a battery. It measures the temperate, which automatically adjusts voltage to help ensure full battery charge depending on the ambient temperature of your battery installation.
Features:
Gives charger proper temperature compensated charging
15 ft (4.6 m) communications cable
Compatible Devices:
Freedom 458 Series
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.60 |
|
|
Remote Battery Temperature Sensor
Sends precise information to the charger or charge controller, which automatically adjusts voltage to ensure full battery charge depending on the ambient temperature of your battery installation.
|
15.04 |
|
|
Battery Temperature Sensor - 6M
This temperature sensor is included with every battery charger.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
41.65 |
|
|
PowerCombi Pure Sine Wave Inverter/Charger - 12V - 2000W - 100 Amp Kit
Simple. Independent. Flexible.
The PowerCombi is a pure sine wave inverter/charger offering grid quality AC power and battery charging in one low profile design. Designed to be an independent inverter/charger, it yet can easily be integrated into a MasterBus network (with additional interface).
With a built-in transfer switch, 2x surge for 3 seconds and on-site dipswitch programming—the PowerCombi offers simple installation with multiple operating modes, and can charge various battery chemistries—including a custom profile for use with Li-ion.
Full certifications make it perfect for use in RV's, boats, and specialty vehicles. Add a battery temperature sensor (BTS), remote display and a communication interface for custom applications.
Features:
Input voltage range: 10-15.5V DC
Includes temperature sensor and powercombi remote
Can be used with Flooded, Gel, AGM and custom battery types
MasterBus compatible via CZone - MasterBus Interface
Specifications:
Amperage: 100 Amps
Amperage Draw at Rest: 3 Amps (idle power)
Multi Bank Chargers: 1 Bank
Output Wave Form: Pure Sine Wave
Type: Inverter/Charger
Voltage: 12V DC
|
1156.80 |
|
|
PowerCombi Pure Sine Wave Inverter/Charger - 1200W - 12V - 50A Kit
Simple. Independent. Flexible.
The PowerCombi is a pure sine wave inverter/charger offering grid quality AC power and battery charging in one low profile design. Designed to be an independent inverter/charger, it yet can easily be integrated into a MasterBus network (with additional interface).
With a built-in transfer switch, 2x surge for 3 seconds and on-site dipswitch programming—the PowerCombi offers simple installation with multiple operating modes, and can charge various battery chemistries—including a custom profile for use with Li-ion.
Full certifications make it perfect for use in RV's, boats, and specialty vehicles. Add a battery temperature sensor (BTS), remote display and a communication interface for custom applications.
Features:
Input voltage range: 10-15.5V DC
Includes temperature sensor and powercombi remote
Can be used with Flooded, Gel, AGM and custom battery types
MasterBus compatible via CZone - MasterBus Interface
|
986.40 |
|
|
Temperature Sensor 240° F - 1/8-27NPTF
All Temperature sensors are designed to work with VDO gauges only. Sensors are matched to gauges according to maximum reading on dial face. All sensors are standard ground (sensor case to common ground).
Please note: VDO sensors have tapered threads and DO NOT require the use of Teflon tape or pipe sealant. This will interfere with grounding causing incorrect instrument readings.
Features:
Marine 240°/250°F Temperature Sender
1/8-27 NTPF Threads
All brass construction
#8-32 Connection
Works with most standard marine temperature gauges
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.23 |
|
|
ProNautic 1260P Remote Temperature Sensor Probe
Replacement for the ProNauticP temperature probe that comes standard with the ProNauticP. Once the temperature sensor is connected to the charger, it will adjust its charge based on the batteries temperature.
Features:
Plug and play functionality
Technical Specifications:
Connection (Battery End) - Ring terminal
Connection (Charger End) - RJ45 style
Cable length - 10' (3 M)
*Sold as an Individual
|
11.98 |
|
|
Universal Temperature Sensor
Use with the P12 Charger, M2 OLED, and Mini OLED Meters
Includes double-sided tape
Waterproof design
Temperature Range: -40°F to 300°F (-40°C to 150°C)
Wire Length: 18"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.60 |
|
|
TRUECHARGE™2 Remote Panel
Advanced Remote for Monitoring and Full Control of Battery Charger Performance.
The TRUECHARGE™2 Remote Panel is designed for use with TRUECHARGE™2 Battery Chargers. This full-function remote allows you to monitor and control battery charger performance from a remote location, including features not accessible from the charger's onboard display. The TRUECHARGE™2 Remote Panel reads like a fuel gauge and displays critical information on charging of battery banks. It is very easy to install, read and operate, connecting with the battery charger through the included telephone cable.
Product Features
Gives the user flexibility to set maximum charger output current
Allows the charger to be powered on or placed into standby while AC power is connected
Programs the charger for battery type and temperature
Displays faults and warnings, basic battery level and settings
Displays the current status of each battery or each battery bank
Simple push buttons to change charger settings
FCC Class B compliant
Can be used to operate two chargers in parallel to increase output capacity
Product Includes
TRUECHARGE™2 remote panel
7.6 m (25') 6-conductor crossed telephone cable (part# 31-6257-00)
Mounting template and 1-1/2" NPT locknut for mounting
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
86.69 |
|
|
TRUECHARGE™2 Battery Charger
Redesigned, High Performance, Worldwide Charging
Xantrex TRUECHARGE™2 Battery Chargers lead the industry with a small footprint and ultra-compact design.
Now with PARALLEL STACKING FEATURE
This NEW feature allows two chargers to work together to combine the output current, achieving up to 40A for large battery banks.
Product Info
In addition to meeting global safety and regulatory standards, TRUECHARGE™2 Battery Chargers feature low electrical interference and superior, efficient, power factor corrected multistage charging. TRUECHARGE™2 Battery Chargers can be mounted virtually anywhere, given their unique drip-proof design. With certified ignition protection, even a gasoline engine room is an alternative for installation*. Trouble-free installation is ensured with easy-to-access AC and DC wiring compartments and reverse-polarity battery protection.
Performance Features
12-volt models
Microprocessor-controlled, multistage charging algorithms
Settings for two and three-stage charging
Settings for flooded, gel, AGM or lead-calcium batteries
Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources
Temperature-compensated charging
Power factor corrected for efficient charging
Battery-equalization feature
Ability to charge 'dead' batteries
Battery temperature sensor available (Part #808-0232-01)
Protection Features
Reverse battery polarity protection
Drip-proof design
Over and under-temperature protection
DC over-voltage protection
Battery overcharging protection
Ignition protection
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
312.66 |
|
|
TRUECHARGE™2 Battery Charger
Redesigned, High Performance, Worldwide Charging
Xantrex TRUECHARGE™2 Battery Chargers lead the industry with a
small footprint and ultra-compact design.
Now with PARALLEL STACKING FEATURE
This NEW feature allows two chargers to work together to combine the output current, achieving up to 80A for large battery banks.
Product Info
In addition to meeting global safety and regulatory standards, TRUECHARGE™2 Battery Chargers feature low electrical interference and superior, efficient, power factor corrected multistage charging. TRUECHARGE™2 Battery Chargers can be mounted virtually anywhere, given their unique drip-proof design. With certified ignition protection, even a gasoline engine room is an alternative for installation*. Trouble-free installation is ensured with easy-to-access AC and DC wiring compartments and reverse-polarity battery protection.
Performance Features
12-volt models
Microprocessor-controlled, multistage charging algorithms
Settings for two and three-stage charging
Settings for flooded, gel, AGM or lead-calcium batteries
Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources
Temperature-compensated charging
Power factor corrected for efficient charging
Battery-equalization feature
Ability to charge 'dead' batteries
Battery temperature sensor available (Part #808-0232-01)
Protection Features
Reverse battery polarity protection
Drip-proof design
Over and under-temperature protection
DC over-voltage protection
Battery overcharging protection
Ignition protection
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
394.87 |
|
|
TRUECharge™2 Battery Charger
804-2410
10 Amp - 90-265 Vac / 47-63 Hz
AMP-IT-UP! NEW 24-Volt Universal Chargers
Building on the success of the TRUECharge™2 12-volt battery chargers, Xantrex™ now offers 24-volt battery chargers designed to meet the specific needs of marine and commercial markets. Available in 10A, 20A and 30A versions, each model packs a powerful universal charger (90-240Vac, 47-63 Hz) in an ultra-compact, lightweight package.
Product Description
TRUECharge2 battery chargers are highly versatile and can be mounted in multiple positions, thanks to their inherent drip-free design characteristics. TRUECharge2 delivers outstanding low electrical interference, coupled with efficient, power factor corrected, multistage charging capability. Installation is a breeze, thanks to the easy-access AC and DC wiring compartments. The easy-to-read display can be augmented with an optional remote panel.
NEW PARALLEL FEATURE
TRUECharge2 24-volt chargers are available with parallel stacking feature which allows you to double the output current when used with the optional REMOTE PANEL (part #808-8040-01).
Performance Features
24-volt models available in 10A, 20A and 30A
Microprocessor-controlled, multistage charging algorithms
Settings for two and three-stage charging
Settings for flooded, gel, AGM or lead-calcium batteries
Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources
Power factor corrected, temperature-compensated charging
Battery-equalization feature
Ability to charge batteries drained to extremely low voltage
Optional Battery Temperature Sensor (Part #808-0232-01)
Optional Remote Panel (#808-8040-01)
Protection Features
Reverse battery polarity protection
Drip-proof design
Over and under-temperature protection
DC over-voltage protection
Battery overcharging protection
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
365.53 |
|
|
TRUECharge™2 Battery Charger
804-2420
20 Amp - 90-265 Vac / 47-63 Hz
AMP-IT-UP! NEW 24-Volt Universal Chargers
Building on the success of the TRUECharge™2 12-volt battery chargers, Xantrex™ now offers 24-volt battery chargers designed to meet the specific needs of marine and commercial markets. Available in 10A, 20A and 30A versions, each model packs a powerful universal charger (90-240Vac, 47-63 Hz) in an ultra-compact, lightweight package.
Product Description
TRUECharge2 battery chargers are highly versatile and can be mounted in multiple positions, thanks to their inherent drip-free design characteristics. TRUECharge2 delivers outstanding low electrical interference, coupled with efficient, power factor corrected, multistage charging capability. Installation is a breeze, thanks to the easy-access AC and DC wiring compartments. The easy-to-read display can be augmented with an optional remote panel.
NEW PARALLEL FEATURE
TRUECharge2 24-volt chargers are available with parallel stacking feature which allows you to double the output current when used with the optional REMOTE PANEL (part #808-8040-01).
Performance Features
24-volt models available in 10A, 20A and 30A
Microprocessor-controlled, multistage charging algorithms
Settings for two and three-stage charging
Settings for flooded, gel, AGM or lead-calcium batteries
Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources
Power factor corrected, temperature-compensated charging
Battery-equalization feature
Ability to charge batteries drained to extremely low voltage
Optional Battery Temperature Sensor (Part #808-0232-01)
Optional Remote Panel (#808-8040-01)
Protection Features
Reverse battery polarity protection
Drip-proof design
Over and under-temperature protection
DC over-voltage protection
Battery overcharging protection
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
460.69 |
|