Rooftop Mounting Four rugged, watertight mounting pads secure the TracVision A7 or A9 to the roof for a streamlined installation. A single cable connects the antenna to the receiver below.

TracVision A9 with IP-Enabled TV-Hub - Roof Rack Mount Version Give Your RV all the Comforts of Home with In-motion Satellite TV Traveling in your RV gives you the freedom to go wherever you want, whenever you want. Now, add KVH's TracVision A9 in-motion satellite TV antenna system for the pleasure of having your favorite DIRECTV or DISH Network programming available all the time*. Whether you are rolling down the road or resting along the way, you can skip the DVDs and enjoy hundreds of channels of live DIRECTV or DISH Network service on the open road. Low-profile System for RVs KVH designed the TracVision A9 with your RV in mind; at just 5 inches high, this system ensures there are no issues with height restrictions. TracVision A9 has multi-satellite capability for a wide range of programming. Never miss your favorite sports teams in action or your family's favorite TV shows, and stay informed with current traffic, weather, and news information. Innovative TV-Hub Makes System Access Easy The TracVision TV-Hub is an IP-enabled antenna control unit allowing access to system information from any mobile device or laptop. The TV-Hub makes it easy to control the satellite TV system with a wizard for easy installation and setup, plus access to fast troubleshooting and system diagnostics. Features: In-motion reception of local programming* along with more than 300 channels of DIRECTV or DISH Network satellite TV programming and 50+ channels of satellite radio** 5-inch high, dome*** available in high-gloss black automotive-grade finish Compatible with virtually all standard factory-installed and aftermarket video systems Sleek IP-enabled TracVision TV-Hub delivers easy setup and operation, and easy user interface for system information from any smartphone, tablet, smart TV, or computer World-class warranty coverage and support Get a free satellite TV receiver for either DISH Network or DIRECTV U.S**** thru www.kvh.com/tvreceiver for details *TracVision A9 provides full in-motion reception of satellite TV signals on open roads with a clear view of the TV satellites in the southern sky throughout most of the continental U.S. **Access to local channels is subject to local availability and satellite accessibility. ***Low-profile (flat) domes are ideally suited for in-motion operation and may experience rain fade from pooling water in some stationary applications. Dry conditions must exist for stationary operation. ****DISH Network or DIRECTV U.S. receiver sent separately; requires pre-activation of service. See www.kvh.com/tvreceiver for details.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Universal Kayak Roof Mount Attwood's Universal Kayak Roof Rack Mount fits existing roof racks. Popular "J" style rack. Safely secures your kayak to the top of your cars roof rack. Includes two straps for securing purposes. "J" style rack Universal - fits existing roof racks Roof rack type carrier

RAM® Tough-Claw™ Heavy Duty Mount for weBoost This weBoost mounting kit includes a 3/8"-24 X .375" threaded RAM® Tough-Ball™ that screws directly into the weBoost antenna, a C size medium length socket arm, and a C size medium clamp RAM® Tough-Claw™ to mount to 1" to 1.875" rails and bars such as a vehicle ladder, or roof/bed rack. The adjustability of the RAM® Mounts system allows you to collapse the antenna while not in use, as well as extend the reach of the weBoost antenna is mounted in a tight space. This weBoost antenna mount is compatible with all weBoost vehicle antennas including the Drive Reach OTR, RV, and Drive X RV antennas making this the ideal mounting solution for off-road vehicles and semi-trucks. Features: Kit includes 3/8"-24 X .375" Threaded RAM® Tough-Ball™ that screws into thread adapter of the weBoost antenna, C size medium length socket arm, and C size medium clamp RAM® Tough-Claw™ to mount to 1" to 1.875" rails and bars such as a vehicle ladder or roof/bed rack The adjustability of the ball and socket technology allows the weBoost mount to collapse when not in use, and provide extended reach in tight mounting areas Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: CLAMP RANGE: 1" - 1.875" diameter, 0" - 1.6" flat surfaces THREAD PITCH: 3/8"-24 X .375" BALL/SOCKET SIZE: C Size (1.5") WEIGHT CAPACITY: Standard Use: 4 lbs, Heavy-Duty Use: 3 lbs MATERIALS: Marine-grade aluminum, High strength composite

Mast Mount f/KVH TV1 Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.  Adjustable Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast. Incredible Strength The solid under body construction not only greatly improves strength but also hides radar cables. On certain models. Accessories Pre-drilled under body allows for flood lights or horns to be mounted on certain models. Compatible Units: Intellian - 12 & i3 KVH - M1DX, M1, TV1, M2, M3, M3DX, M3ST, V3, V3-IP, TV3, V3HTS and V30 Raymarine - 33STV & 37STV  

3" Low Profile Satdome Mount f/KVH M1/M1DX/TV1, Intellian i1 & i2, Raymarine 33STV Seaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables through. This allows for a nice clean installation. Durable Construction The UV stable ABS plastic can withstand any abuse you throw at it and is completely corrosion free. Easy Installation Four pre-drilled mounting holes and water tight gasket is provided for a nice simple and hassle free installation. Space Saving Has a very small footprint making it the perfect choice when you are limited on space.

Universal No-Drill™ Vehicle Base The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base with a universal design to fit a variety of vehicles. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. Will this mount install in your vehicle? Learn more by following the steps in the Quick Guide located under the Literature tab. Features: Custom, No-Drill™ mounting base offers lowest profile in the industry Manufactured from high strength steel with a durable powder coat finish If required, high quality fastening hardware is included Mounts using existing seat bolts, no drilling required Specifications: Placement of Mount: Passenger side floor board, in front of seat Drilling Requirements: No Drilling - uses existing seat bolts Seat Configuration: Bucket Pole: Lower Pole included with base Material: Powder Coated Steel Features: 1. Custom, No-Drill™ mounting base offers lowest profile in the industry 2. Manufactured from high strength steel with a durable powder coat finish 3. If required, high quality fastening hardware is included 4. Mounts using existing seat bolts, no drilling required

RAM® No-Drill™ Laptop Mount f/ '19-21 RAM 1500 This RAM® No-Drill™ laptop stand system installs quickly and easily into the 2019 Dodge RAM 1500 using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions. Specifications: Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel Notes: If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit. Laptop base will fit under seat air duct in vehicles that have that option. Compatible Vehicles RAM 1500 (2019-2021)

RAM® No-Drill™ Universal Mount f/Heavy Duty Trucks The RAM® No-Drill™ mounting base features a heavy-duty steel mounting base custom designed to fit these vehicles perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the base in the vehicle. This configuration provides a telescoping feature that ranges from 12 to 18 inches. The double swing arm provides articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. This vehicle base kit comes with the 2.5” round plate with AMPs hole pattern for attaching to multiple RAM products.  Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" 3-Hole 120-Degree: 1.812" Diameter Materials: Powder coated steel Marine grade-aluminum Ball/Socket Size: C Size - 1.5"

8" Aluminum Wedge Mount for Starlink Is your Boat Starlink Ready? Enhance the performance of your Starlink Flat High-Performance with our Aluminium 8° Wedge Mount which has been specifically designed for the marine environment. The mount works as a stand-alone wedge or is compatible with our Modular Dual PowerTower Range and SC103/4 Pole mounts. The Scanstrut Aluminium 8° Wedge Mount for Starlink High-Performance has been specifically designed for the marine environment. This versatile wedge can serve as a standalone option for mounting Starlink directly onto a boat's roof or deck. Additionally, it functions as an adapter plate, seamlessly integrating with our popular Modular Dual PowerTower range, making it ideal for multi-electronic installations on powerboats. It can also be used as a top plate in conjunction with our SC100 Pole Mount range, designed specifically for transom mounting on sailing boats, ensuring that your Starlink hardware is elevated to an optimal position while optimizing space onboard. Features: Designed to fit Starlink High-Performance. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Built-in Scanstrut Cable Seal ensures a watertight installation. No need to cut the Starlink connectors for installation. Marine sealant is not required. Paint finishes comply with our unique 4-step marine paint system. Constructed from the best marine-grade aluminum.

RAM 12" Long Double Swing Arm with Open Swivel Single Socket The RAM-VB-110-4U consists of two 6" long single swing arms, Tele-Pole connection hole and swivel single socket that will accommodate 1.5" ball bases. The two swing arms connect with a bolt and knob system. With a simple turn of the knob you can pivot the swing arms at this center point and the tighten the knob to lock the arms in place. The swivel single socket arm allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. Easily incorporated into numerous RAM systems, this rotating swing arm is available with the standard 1.5 inch ball size or the heavy duty 2.25 inch ball size. Swing Arm Length: 12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 12" Double Swing Arm with 2.5" Diameter Round Base The RAM-VB-110-1U consists of a double swing arm with swivel socket arm and 2.5" diameter round base with the universal AMPS hole pattern. This mount allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM vehicle mount. Taking the highly successful RAM vehicle mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. Double Swing Arm Length: 12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Tab-Tite Universal Clamping Cradle f/Google Nexus 7 w/ or w/o Light Duty Sleeve The RAM-HOL-TAB18U consists of a spring loaded back plate and custom support cups for the Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB18U is just what you need to get the most out of your tablet. The RAM Tab-Tite cradle is compatible with the following tablets: Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Tab-Tite Cradle Dimensions: Height: 7" minimum to 8.875" maximum Width: maximum to 4.7" Depth: maximum to 0.43" Tab-Tite Cradle Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM® No-Drill™ Vehicle Base for '19 Chevy Silverado 1500 & GMC 1500 The RAM® No-Drill™ laptop mounting base features a stabilizer foot and heavy-duty steel base custom-designed to fit the 2019 Chevrolet All-New Silverado and GMC Next Generation Sierra perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the mounting base in the vehicle. Specifications: Placement of Mount: Passenger side, in front, where seat frame meets floor board Drilling Requirements: No. Utilizes existing vehicle mounting points and hardware Seat Configuration: Bucket Pole: Purchase Separately Material: Powder Coated Steel Features: Custom, No-Drill™ mounting base offers lowest profile in the industry Manufactured from high strength steel with a durable powder coat finish If required, high quality fastening hardware is included Mounts using existing seat bolts, no drilling required

Roof Rack Systems