|
Tuner for M802 & M803
When connected to the M802 or M803, the AT-140 automatically bypasses e-mail and shortwave listening, the AT-140 allows use of the entire antenna for best reception. Get fast frequency access without missing communication opportunities! The AT-140 comes ready for simple antenna cable and power connections. Install the unit near the antenna element base.
Features:
Completely weather-resistant acrylic case with rubber gaskets
45 memories for shorter tuning times
Quick Low power tune-up
Pre-wired cable connection points, just plug and play
Dimensions: 230 (w) x 340 (H) x 80 (D) mm
Antenna connector: SO-239
Max. Input Power: 150 W (PEP) 100 W (continuous)
Automatic tuning time: Approx 2-3 seconds
|
570.25 |
|
|
HF Automatic Antenna Tuner
Tune in your HF marine world
Suitable for many vessels
The versatile AT-130 can be used with a variety of vessels, even smaller boats that cannot use a long antenna element. For example, the AT-130 will match a 7 m (23 feet) long wire antenna across the marine band in the 1.6 - 27.5 MHz range.
Automatic tuning
No manual tuning is needed. Just push the [TUNE] switch on an Icom HF marine transceiver; the AT-130 adjusts the antenna and the transceiver to the minimum SWR in any frequency on an HF marine band. The AT-130 allows you to transmit with strong RF output power, and is perfect for maritime mobile operations.
Weather resistant
The AT-130 is housed in a durable, completely weather-resistant acrylic case with rubber gaskets. This allows it to be conveniently installed near the antenna element base.
For Icom HF marine transceivers
Icom's sophisticated AT-130 easily matches Icom HF marine transceivers. The AT-130 easily interconnects with an Icom HF marine transceiver. AT-130 installation is simple. No adjustments are necessary. Just connect the control cable and antenna wire and go!
Quick tune-up
Improved tuning performance...the tune-up time is less than 3 seconds in any frequency on an HF marine band. In addition, the AT-130 has 8 convenient memories to store tuning information. Retuning for a memorized frequency takes about 1.5 seconds. This allows you quick trouble-free frequency changes.
Low power tune-up
The AT-130 emits very little output power (just 300 mW) during the tuning process. This reduces the possibility of causing interference to other stations using the frequency.
Specifications
Dimensions: 230(W) x 340(H) x 80(D) mm; 9.1(W) x 13.4(H) x 3.1(D) in (projections not included)
Weight: 2.7 kg; 6.0 lb
Usable Temperature Range: -30C ~ +60C
Rated Voltage: 13.6 V DC +/-15% (negative ground) (supplied from an Icom HF marine transceiver)
Current Drain (at 13.6 V DC): 2 A
Frequency Coverage: 1.6~30 MHz (with the antenna length 7 m (23 ft) or longer)
Input Impedance: 50 ohms (unbalanced)
Max. Input Power: 150 W (PEP)
Input Power During Tuning: 10 W
Auto Tuning Time: 1.5 sec. (returning for a memorized frequency), typically 2~3 sec. (when operating band has been changed)
Auto Tuning Accuracy: VSWR 2.0:1
Insertion Loss: 0.5 dB (with a 50 ohms load, after tuning)
|
550.18 |
|
|
OPC-1465 Shielded Control Cable for AT-140 to M803 - 10M
Shielded Control Cable
OPC-1465 Compatible With:
Icom GM800 GMDSS MF/HF Marine Transceiver with Class A DSC
|
69.92 |
|
|
Shielded Control Cable
10m shielded control cable connect between AT-140 and m802 receiver.
|
63.84 |
|
|
2" Heavy-Duty Oil Temp Gauge (140-320 F/C) - Black *Bulk Case of 24*
Features:
2" Hole Size
Oil Gauge/Temp Gauge
140-320 F/C
Black
*Bulk Case of 24
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
691.94 |
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow.
Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available.
All-new sleek, modern design.
First all modular system - extremely versatile.
Easy to select and install for any radar, dome, light or camera combination.
Easy to add accessories.
Upgradable for future additions and modifications.
Powder coated aluminum construction
Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer.
The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."
See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )
Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.
SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686
|
|
|
M510 EVO VHF with NMEA 2000
The IC-M510 EVO is a multifunctional and stylish VHF marine transceiver that also features innovative smartphone operation technology. Its built-in class D DSC provides essential maritime communication, supporting safety on the water. Integration with built-in NMEA 2000™ connectivity and two-way hailer/RX hailer functions enhances the experience at sea even more.
Simple remote control through a smart device enables an unprecedented onboard communication experience. In addition, the product features a color display, navigation functions, and a stylish design that won an iF design award. It can be used for pleasure boats, fishing boats, and sailing, as well as in rescue and public safety.
*AIS receiver not included in the M510 EVO 41
NMEA 2000™ and Loud 25 W Two-Way Hailer/20 W RX Hailer Now Built-in
The NMEA 2000™ network provides plug-and-play data communication to inter-connect with other marine equipment such as an MFD (Multi-Function Display.) The radio can send GNSS (GPS) position, AIS information*, DSC call, and radio channel data to other equipment.
When connected to the optional SP-37 speaker horn, users can talk with the crew on the deck or shore via the radio's microphone and hear any reply via the horn speaker. The RX hailer function lets users listen to the radio traffic on the deck or tower through the hailer speaker. Users can also sound foghorn patterns from the hailer speaker.
Radio Control & Intercom Through Smart Devices
Use the RS-M500 app (for iOS/Android) to wirelessly control the IC-M510 EVO through the radio’s WLAN feature. Users can use up to three smart devices as a wireless microphone, intercom between a device and the M510, and a simple remote control for specific functions.
Award Winning Sleek Design - iF DESIGN AWARD 2022
The IC-M510 series (including the IC-M510 EVO) is a winner in the world-renowned iF DESIGN AWARD 2022. The radio can be installed in either panel or trunnion mounting and has a sleek design that looks great on a boat's black glass cockpit dashboard.
Wide Viewing Angle Color TFT LCD
The color TFT LCD provides nearly a 180-degree viewing angle. The wide-viewing-angle display has high-resolution characters and function icons. Hold down the DISP key to switch the night mode screen, ensuring good readability in low-light conditions.
Built-in Class D DSC, “Distress” Button Can be a Lifesaver in an Emergency Situation
With just a press of the “DISTRESS” button, the built-in DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC watch function continuously monitors the DSC channel (Ch. 70) for added safety and security.
15 W Speaker Provides Clear and Loud Audio
The built-in waterproof speaker enhances the received audio and provides powerful, clear audio.
Simplified Navigation Function
The navigation function guides users to a specified waypoint or AIS target. Users can assign up to 100 destinations as waypoints, such as favorite fishing spots or starting positions for yacht races.
Combined with MA-510TR Supports Safer Navigation
When connected to the optional MA-510TR Class B AIS transponder, users can send and receive real-time information about vessels, including identity, position, speed, course, and other relevant data, displayed on the screen. Making a vessel's position known to others helps prevent collisions and accidents, especially at night, in rough weather, or on crowded shipping routes. The MA-510TR enhances safety during navigation at sea.
Active Noise Canceling Technology
The Active Noise Cancelling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment.
Other Features:
Integrated GNSS receiver (selectable from either internal GPS antenna or use optional UX-241 GNSS antenna)
IP68 advanced waterproofing (1 m depth of water for 60 minutes)
Voice Scrambler with optional UT-112A
AquaQuake™ prevents audio degradation from a water-logged speaker
Supplied HM-205RB speaker-microphone can be connected to either the front or rear panel to meet to user's requirement
External speaker connection
Optional HM-195 CommandMic™ are available
Supports 4-digit channels
Supplied waterproof flash mount gasket for panel mount
Specifications:
General Specifications:
Frequency range: TX: 156.025 157.425 MHz; RX: 156.050 163.275 MHz; DSC: 156.525 MHz; AIS1, 2*1: 161.975, 162.025 MHz
Usable Channels: USA, CAN, INT, WX channels
Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1
Power Supply Requirement: 13.8 V DC (11.7 15.9 V DC)
Current Drain (at 13.8 V DC): TX 25 W output: 5.0 A; RX Max. audio: 1.6 A, 2.0 A (with HM-195), 4.0 A (with extSP), 7.3 A (with ext SP, RX hailer, and HM-195)
Operating Temperature Range: –20 degrees C +60 degrees C, –4 degrees F +140 degrees F
Antenna Impedance: 50 Ω
Dimensions (W x X x D): 175 x 110 x 53 mm, 6.8 x 4.3 x 2.1 in
Weight (approx.): 730 g, 1.6 lb (not including microphone)
Transmitter Specifications:
Output Power (at 13.8 V DC): 25 W, 1W
Max. Frequency Deviation: ±5 kHz
Frequency Tolerance: ±0.5 kHz
Spurious Emissions: Less than −70 dBc (at 25 W)
Residual Modulation: More than 40 dB
Adjacent Channel Power: More than 70 dB
Receiver Specifications:
Sensitivity (at 12 dB SINAD): –10 dBμ typical
DSC (1% BER): –1 dBμ emf typical
Adjacent Channel Selectivity: More than 75 dB
DSC (1% BER): More than 73 dBμ emf
Spurious Response: More than 75 dB
DSC (1% BER): More than 73 dBμ emf
Intermodulation: More than 75 dB
DSC (1% BER): More than 68 dBμ emf
Hum & Noise: More than 40 dB
Audio Output Power: More than 15 W (external speaker)
Audio Output Power (at 10% distortion with 4 Ω): 20 W typical (RX Hailer), 25 W typical (Hailer)
Wireless LAN Specifications:
Wireless LAN standard: IEEE802.11 b/g/n
Authentication and Encryption: WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES)
Channels: 1 to 13 (2.4 GHz band)*2
Output Power: Less than 10 mW/MHz
Supplied Accessories:
Speaker microphone, HM-205RB
Microphone hanger
DC power cable
Mounting bracket kit
Flush mount gasket
*1 Only for the Integrated AIS version. *2 May differ depending on the country of use.
|
959.94 |
|
|
M510 EVO VHF with AIS & NMEA 2000
The IC-M510 EVO is a multifunctional and stylish VHF marine transceiver that also features innovative smartphone operation technology. Its built-in class D DSC provides essential maritime communication, supporting safety on the water. Integration with built-in NMEA 2000™ connectivity and two-way hailer/RX hailer functions enhances the experience at sea even more.
Simple remote control through a smart device enables an unprecedented onboard communication experience. In addition, the product features a color display, navigation functions, and a stylish design that won an iF design award. It can be used for pleasure boats, fishing boats, and sailing, as well as in rescue and public safety.
*AIS receiver is integrated in the M510 PLUS EVO 51
NMEA 2000™ and Loud 25 W Two-Way Hailer/20 W RX Hailer Now Built-in
The NMEA 2000™ network provides plug-and-play data communication to inter-connect with other marine equipment such as an MFD (Multi-Function Display.) The radio can send GNSS (GPS) position, AIS information*, DSC call, and radio channel data to other equipment.
When connected to the optional SP-37 speaker horn, users can talk with the crew on the deck or shore via the radio's microphone and hear any reply via the horn speaker. The RX hailer function lets users listen to the radio traffic on the deck or tower through the hailer speaker. Users can also sound foghorn patterns from the hailer speaker.
Radio Control & Intercom Through Smart Devices
Use the RS-M500 app (for iOS/Android) to wirelessly control the IC-M510 EVO through the radio’s WLAN feature. Users can use up to three smart devices as a wireless microphone, intercom between a device and the M510, and a simple remote control for specific functions.
Award Winning Sleek Design - iF DESIGN AWARD 2022
The IC-M510 series (including the IC-M510 EVO) is a winner in the world-renowned iF DESIGN AWARD 2022. The radio can be installed in either panel or trunnion mounting and has a sleek design that looks great on a boat's black glass cockpit dashboard.
Wide Viewing Angle Color TFT LCD
The color TFT LCD provides nearly a 180-degree viewing angle. The wide-viewing-angle display has high-resolution characters and function icons. Hold down the DISP key to switch the night mode screen, ensuring good readability in low-light conditions.
Built-in Class D DSC, “Distress” Button Can be a Lifesaver in an Emergency Situation
With just a press of the “DISTRESS” button, the built-in DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC watch function continuously monitors the DSC channel (Ch. 70) for added safety and security.
15 W Speaker Provides Clear and Loud Audio
The built-in waterproof speaker enhances the received audio and provides powerful, clear audio.
Integrated AIS Receiver*
With its integrated AIS receiver*1 or external NMEA sentence*2, the IC-M510 can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen.
*1 AIS receiver is not included, depending on the transceiver version. *2 Optional MA-510TR or third-party AIS receiver/transponder.
Simplified Navigation Function
The navigation function guides users to a specified waypoint or AIS target. Users can assign up to 100 destinations as waypoints, such as favorite fishing spots or starting positions for yacht races.
Combined with MA-510TR Supports Safer Navigation
When connected to the optional MA-510TR Class B AIS transponder, users can send and receive real-time information about vessels, including identity, position, speed, course, and other relevant data, displayed on the screen. Making a vessel's position known to others helps prevent collisions and accidents, especially at night, in rough weather, or on crowded shipping routes. The MA-510TR enhances safety during navigation at sea.
Active Noise Canceling Technology
The Active Noise Cancelling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment.
Other Features:
Integrated GNSS receiver (selectable from either internal GPS antenna or use optional UX-241 GNSS antenna)
IP68 advanced waterproofing (1 m depth of water for 60 minutes)
Voice Scrambler with optional UT-112A
AquaQuake™ prevents audio degradation from a water-logged speaker
Supplied HM-205RB speaker-microphone can be connected to either the front or rear panel to meet to user's requirement
External speaker connection
Optional HM-195 CommandMic™ are available
Supports 4-digit channels
Supplied waterproof flash mount gasket for panel mount
Specifications:
General Specifications:
Frequency range: TX: 156.025 157.425 MHz; RX: 156.050 163.275 MHz; DSC: 156.525 MHz; AIS1, 2*1: 161.975, 162.025 MHz
Usable Channels: USA, CAN, INT, WX channels
Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1
Power Supply Requirement: 13.8 V DC (11.7 15.9 V DC)
Current Drain (at 13.8 V DC): TX 25 W output: 5.0 A; RX Max. audio: 1.6 A, 2.0 A (with HM-195), 4.0 A (with extSP), 7.3 A (with ext SP, RX hailer, and HM-195)
Operating Temperature Range: –20 degrees C +60 degrees C, –4 degrees F +140 degrees F
Antenna Impedance: 50 Ω
Dimensions (W x X x D): 175 x 110 x 53 mm, 6.8 x 4.3 x 2.1 in
Weight (approx.): 730 g, 1.6 lb (not including microphone)
Transmitter Specifications:
Output Power (at 13.8 V DC): 25 W, 1W
Max. Frequency Deviation: ±5 kHz
Frequency Tolerance: ±0.5 kHz
Spurious Emissions: Less than −70 dBc (at 25 W)
Residual Modulation: More than 40 dB
Adjacent Channel Power: More than 70 dB
Receiver Specifications:
Sensitivity (at 12 dB SINAD): –10 dBμ typical
DSC (1% BER): –1 dBμ emf typical
Adjacent Channel Selectivity: More than 75 dB
DSC (1% BER): More than 73 dBμ emf
Spurious Response: More than 75 dB
DSC (1% BER): More than 73 dBμ emf
Intermodulation: More than 75 dB
DSC (1% BER): More than 68 dBμ emf
Hum & Noise: More than 40 dB
Audio Output Power: More than 15 W (external speaker)
Audio Output Power (at 10% distortion with 4 Ω): 20 W typical (RX Hailer), 25 W typical (Hailer)
Wireless LAN Specifications:
Wireless LAN standard: IEEE802.11 b/g/n
Authentication and Encryption: WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES)
Channels: 1 to 13 (2.4 GHz band)*2
Output Power: Less than 10 mW/MHz
Supplied Accessories:
Speaker microphone, HM-205RB
Microphone hanger
DC power cable
Mounting bracket kit
Flush mount gasket
*1 Only for the Integrated AIS version. *2 May differ depending on the country of use.
|
1139.94 |
|
|
Charger Adapter Cup
Icom's Charger Adapter Cup is made specifically for Icom's BC119N and Icom's M88.
|
15.59 |
|
|
HM180 Replacement Mic for M710 & M700 Pro
Icom HM180 Microphone Repalcement specifically for Icom's M710 and M700 Pro.
|
84.36 |
|
|
Li-Ion Battery
Specifically for Icom's M34 and M36 handheld VHF radios. Provides approximately 9 hours of operating time.
|
66.70 |
|
|
Alkaline Battery Case for Icom's M34 & M36
Holds 5 AAA Batteries and offers an alternate way to power your radio in place of the standard Li-ion battery pack that comes with the unit.
|
35.05 |
|
|
Alligator Belt Clip for M25
Alligator Belt Clip for Icom's M25 Marine Transceivers.
|
16.20 |
|
|
Standard Belt Clip for M85 & M85IS
Features:
3.25" length
For Icom M85 radios
|
15.30 |
|