115W Solar Max Flex Panel This Xantrex Solar Max panel features solar panels with mesh grid technology that provides superior durability and performance benefits. With approximately 2000 contact points per cell, this mesh grid technology allows the panel to flex up to 180 degrees without impacting power output. Subject to extreme environmental and accelerated lifecycle testing beyond regulatory standards, the Max panel was tested 50 times more durable than a standard flexible panel.  It is also designed with a highly protective top layer called ETFE (Ethylene-Tetra-Fluoro-Ethylene), which allows for better light transmittance, corrosion resistance, stain resistance, weather resistance, and overall superior durability over a wide temperature range compared to non-ETFE semi-flexible-panels.  Features: Premium peel-and-stick flexible solar panel Harvest up to 20% more energy during the day in low-light or shaded conditions compared to a standard solar panel Applications: Recreational vehicles Heavy-duty trucks Marine Work trucks Specialty vehicles Specifications Electrical Specifications: Maximum Power-Pmax (W) at STC*: 115 Maximum Power Voltage-Vmp (V): 22.1 Maximum Power Current-Imp (A): 5.2 Open Circuit Voltage-Voc (V): 27.4 Short-Circuit Current-Isc (A): 5.6 Maximum System Voltage (V): 600 Mechanical Specifications:  Cell Type: Mono-Crystalline PERC     Top-Layer: ETFE Junction Box: IP67 Rated Connector: MC4 – type Number of Cells: 42 (6 x 7) Weight: 6.0 lb (2.7 kg) Dimensions (L x W x D): 37.5 x 28.4 x 0.08 in (953 x 722 x 2 mm) Temperature Specifications: Operating Temperature: -40–85 degrees C Temperature Coefficients of Pmax: -0.39%/ degrees C Temperature Coefficients of Voc: -0.30%/ degrees C Temperature Coefficients of Isc: +0.06%/ degrees C This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

110W Solar Max Flex Slim Panel The 110W Xantrex Solar flex kit features a flexible solar panel with 5 busbars and PERC (Passivated Emitter and Rear Contact) mono-crystalline cells, a special cell technology that increases module efficiency significantly over standard solar cells. Designed with a highly protective top-layer called ETFE (Ethylene-Tetra-Fluoro-Ethylene), this allows for better light transmittance, corrosion resistance, stain-resistance, weather resistance, and overall superior durability over a wide temperature range, compared to non-ETFE semi-flexible panels. Easily customize and extend your solar system using our expansion kits. Benefits: Up to 30 degrees of flexibility PERC technology* 5 busbar technology** ETFE Protection*** 2-year product warranty *Competitor panels do not currently use PERC technology **Most brands use 2-4 busbars, more busbars means better efficiency & durability ***Ethylene-Tetra-Fluoro-Ethylene - extends the lifespan of the panel compared to non-ETFE panels This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

330W Solar Max Flex Slim Panel The 110W Xantrex Solar flex kit features a flexible solar panel with 5 busbars and PERC (Passivated Emitter and Rear Contact) mono-crystalline cells, a special cell technology that increases module efficiency significantly over standard solar cells. Designed with a highly protective top-layer called ETFE (Ethylene-Tetra-Fluoro-Ethylene), this allows for better light transmittance, corrosion resistance, stain-resistance, weather resistance, and overall superior durability over a wide temperature range, compared to non-ETFE semi-flexible panels. Easily customize and extend your solar system using our expansion kits. Benefits: Up to 30 degrees of flexibility PERC technology* 5 busbar technology** ETFE Protection*** 2-year product warranty *Competitor panels do not currently use PERC technology **Most brands use 2-4 busbars, more busbars means better efficiency & durability ***Ethylene-Tetra-Fluoro-Ethylene - extends the lifespan of the panel compared to non-ETFE panels This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

220W Solar Max Flex Slim Panel The 110W Xantrex Solar flex kit features a flexible solar panel with 5 busbars and PERC (Passivated Emitter and Rear Contact) mono-crystalline cells, a special cell technology that increases module efficiency significantly over standard solar cells. Designed with a highly protective top-layer called ETFE (Ethylene-Tetra-Fluoro-Ethylene), this allows for better light transmittance, corrosion resistance, stain-resistance, weather resistance, and overall superior durability over a wide temperature range, compared to non-ETFE semi-flexible panels. Easily customize and extend your solar system using our expansion kits. Benefits: Up to 30 degrees of flexibility PERC technology* 5 busbar technology** ETFE Protection*** 2-year product warranty *Competitor panels do not currently use PERC technology **Most brands use 2-4 busbars, more busbars means better efficiency & durability ***Ethylene-Tetra-Fluoro-Ethylene - extends the lifespan of the panel compared to non-ETFE panels This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Solar Starter Cable Kit Xantrex's Solar Starter Cable Kit provides weather-resistant, certified cables for connecting a solar panel to a charge controller, and from the charge controller to the battery. Features: Designed to connect a PV array to a charge controller and battery Weather-resistant and certified cables PV and battery cables both have built-in ferrule terminations for quick connections to the charge controller Battery cables have built-in fuse and ring terminals In the Box: (1) Pair of (black/red) 20-foot MC4-type PV cables (1) Pair of (black/red) 10-foot MC4-type battery cables Built-in 30A DC ATC fuse on the red cable

Laing D5 710B Solar Pump Energy Efficiency The Solar model has a feature called Maximum Power Point tracking (MPP). This feature controls the pump performance based on the power input of a solar photovoltaic panel. The Solar model can run off as little as 1 watt and will increase in speed and performance as the solar PV panel output increases. The first DC spherical motor pump for direct connection to photovoltaic panels with automatic performance optimization using Maximum PowerPoint (MPP) tracking. GPM given is max. 12-24V DC, 1-35W, 0.30-1.50 Amps with soft start. Bronze Solar Series 6.5GPM at 0' Head (12V) 12-24VDC 1-35 Watts Adjustable Soft Start 1/2"FNPT Ports 230Degree 150psi

SmartSolar MPPT 150/45 Solar Charge Controller A solar charger gathers energy from your solar panels, and stores it in your batteries.  Using the latest, fastest technology, SmartSolar maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time.  SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery.  It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged. Features: MPPT - Ultra Fast Maximum Power Point Tracking - By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.  The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring and Control - Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or another device via VictronConnect. Advanced Maximum Power Point Detection in case of partial shading conditions.  Outstanding conversion efficiency.  Natural convection cooling.  Automatic battery voltage recognition.  Flexible charge algorithm.  Over-temperature protection and power derating when the temperature is high.  Technical Specifications: Dimensions (L x W x H) - 7.3" x  5.2" x  2.8" (186 x 132 x 71mm)  Battery Voltage - 12/24/36/48V  Rated Charge Current - 45A Max. PV Short Circuit Current - 50A Maximum Efficiency - 98% Data Communication Port - VE. Direct In the Box: 150/45 Solar Charge Controller Instruction Manual  *Sold as an Individual Please contact your dealer for any returns, repairs or support issues related to this product.

MPPT Charge Controller Remote Panel with 25' Cable PPT Remote Display Provides real-time data about your solar system. Designed for quick and easy installation. Includes 25' cable.

On/Off Remote Control Panel Xantrex On/Off Remote Control Panel is made specifically for Xantrex Freedom SW2012 and SW3012. Features: The Freedom Remote Panel (remote panel) can be connected to the Freedom SW Inverter via the Remote port on the AC/DC side panel to turn the Freedom SW Inverter ON or OFF from a more convenient location The remote panel also has the ability to enable/disable the Ignition Lockout feature of the Freedom SW Inverter When this feature is enabled, the Freedom SW Inverter will shutdown if the vehicle's ignition is not engaged (not in ACC position) to prevent unnecessary battery drain Includes a 25 foot (7.6-m) communications cable Choose a location that is dry, free from corrosive or explosive fumes, and appropriate for installing an electronic device WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

SmartSolar MPPT 250/60-TR Solar Charge Controller A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged. MPPT: Ultra Fast Maximum Power Point Tracking By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring & Control Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or another device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the  GlobalLink 520. Load Output The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery. Please contact your dealer for any returns, repairs or support issues related to this product.

Smart Solar MPPT 150/85-TR VE.Can A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged. MPPT: Ultra Fast Maximum Power Point Tracking By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring & Control Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or another device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the  GlobalLink 520. Load Output The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains health, and extends the life of your battery. Please contact your dealer for any returns, repairs or support issues related to this product.

Prosine Remote Panel Interface Kit The Xantrex Sine Wave Inverter Interface Panel allows the standard LCD panel to be removed and mounted remotely in the location of your choice. Supplied with 30' (10M) of telephone cable. Features: Standard Telephone Jack Outlet for connection to the LCD Panel LED indicator for basic status monitoring ON/Bypass switch Mounts into the existing cavity in place of the Standard LCD Panel No special wiring required internal filtering reduces interference generated along cable, improving overall performance WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

SmartSolar MPPT 150/35 - 150V - 35A A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. MPPT: Ultra Fast Maximum Power Point Tracking By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring and Control Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally. VictronConnect VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle. Please contact your dealer for any returns, repairs or support issues related to this product.

SmartSolar MPPT 100/20 - Up to 48 VDC A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. MPPT: Ultra Fast Maximum Power Point Tracking By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring and Control Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by Bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally. Load output The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery. Please contact your dealer for any returns, repairs or support issues related to this product.

Convenient Dual Battery Bank Charging Xantrex digital echocharge (part#82-0123-01) is designed to charge auxiliary or starting batteries from an inverter/charger or other charging source with limited voltage drop. The Xantrex echocharge detects when the house battery bank is being charged and directs a portion of the charge current to auxiliary or starting batteries. The maximum charger current offered by echocharge is limited to 15 amps. Product Features 15 A maximum charge current Automatically adjusts for 12 or 24 volt battery banks (both battery banks must be the same DC voltage and battery type) Automatically switches on/off without affecting the in-house battery bank or over-charging Utilizes excess current from the primary charging source Built-in thermal and over-current circuits Reverse polarity protection Easy three wire installation WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.