DMX Control Output Cable - 3M - OceanBridge to OceanConnect or 2-Way The OceanLED DMX Control Output Cable is used to link the OceanBridge Multizone Lighting Controller to an OceanConnect Junction Box or 2-Way Junction Box. The cable is required for any OceanBridge system where junction boxes are in use. Specifications: Cable Length: 3 meters

DMX Control Output Cable - 5M - OceanBridge to OceanConnect or 2-Way Cable The OceanLED DMX Control Output Cable is used to link the OceanBridge Multizone Lighting Controller to an OceanConnect Junction Box or 2-Way Junction Box. The cable is required for any OceanBridge system where junction boxes are in use. Specifications: Length: 5 meters

DMX Control Output Cable - 10M - OceanBridge to OceanConnect or 2-Way Cable The OceanLED DMX Control Output Cable is used to link the OceanBridge Multizone Lighting Controller to an OceanConnect Junction Box or 2-Way Junction Box. The cable is required for any OceanBridge system where junction boxes are in use. Specifications: Length: 10 meters

DMX Control Output Cable - 15M - OceanBridge to OceanConnect or 2-Way Cable The OceanLED DMX Control Output Cable is used to link the OceanBridge Multizone Lighting Controller to an OceanConnect Junction Box or 2-Way Junction Box. The cable is required for any OceanBridge system where junction boxes are in use. Specifications: Length: 15 meters

DMX Control Output Cable - 20M - OceanBridge to OceanConnect or 2-Way Cable The OceanLED DMX Control Output Cable is used to link the OceanBridge Multizone Lighting Controller to an OceanConnect Junction Box or 2-Way Junction Box. The cable is required for any OceanBridge system where junction boxes are in use. Specifications: Length: 20 meters

DMX Control Cable - 15M OceanLED DMX Control Cables are the same as OceanLED DMX APP Cables just different lengths depending on your requirements.

DMX Control Cable - 5M OceanLED DMX Control Cables are the same as OceanLED DMX APP Cables just different lengths depending on your requirements.

DMX Control Cable - 10M OceanLED DMX Control Cables are the same as OceanLED DMX APP Cables just different lengths depending on your requirements.

Ethernet Colors Connection Cable - 3M The 3 meter IP68 Ethernet (or CAT 5) harness is used to connect each additional driver until the last driver in chain is connected. This is a required part for Pro Series Colors model installs. One Ethernet Colors Connection Cable is required for each driver-to-driver connection.

MA7065 6.5" 2-Way Marine Speaker with 2 Grills - White & Graphite 6.5-inch 2-way marine speaker. Upgraded waterproof design supplied with both white and graphite gray grills. Power handling capability of 180 watts/pair. Features: Colorfast plastic frame withstands UV rays Supplied with both white and graphite gray grills Waterproof construction throughout Ferro-fluid filled neodymium tweeter Specifications:  Frequency Response: 90Hz to 20 kHz (2 Way) SPL: 87dB Cone Size: 6 1/2" (165mm) Peak Power: 180 watts/pair Continuous Power: 90 watts RMS/pair Mounting Depth: 2 51/64" (71mm) Speaker Impedance: 4 ohm Overall Diameter: 7 9/16" (192mm) Cutout Diameter: 5 5/8" (145mm) Weight: 2.95 lbs per Speaker This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Explore E6 & E7 Link Cable - 3M Features: Length: 3M For the Explore E6 & E7 models Specifications: Warranty: 3 years

2-Way DMX Junction Box The 2-Way DMX Junction Box has been specifically developed to work in combination with OceanLED Sport Colors DMX lights and Explore E3 Colors DMX lights. Its primary role is to allow for the distribution of power and DMX signals within the vessel’s underwater lighting system. Using the 2-Way DMX Junction box, a Sport Colors DMX or Explore E3 Colors DMX system can be expanded to include up to 32 lights. The IP66-rated 2-Way Junction Box unit is made from robust polycarbonate materials and should be mounted in a protected area within the vessel. Features: Allow for the distribution of power and DMX signals within the vessel’s underwater lighting system

DMX Touch Panel Controller The DMX touch panel controller allows you to communicate with all the lights in the system as a complete lighting system. At least one DMX control panel is required to control Pro Series Colours model lights, whether you choose this model or the Wi-Fi model.

Wash Down Control - 12V - 2-Way On/Off Switch panel that gives full control of your equipment. Just push the button for manual or automatic bilge pumping. The automatic feature operates in combination with the automatic bilge switches or the electronic float switch. The three-position switch panel in matt black finish has an integrated fuse holder and operating light. Fuses are not included. Features: Enables automatic bilge pumping Matte black finish 12-Volt 2-way on off controls Fuses not included

RealVision 3D Transducer Extension Cable - 3M(10') RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers.  Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end.  For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run.