LED Deck Light - White Housing - 2500 Lumens Hella Marine introduces the low profile and powerful FMS LED deck lamps. These surface-mount scene lamps are purpose-designed to integrate discreetly in tight spaces and exterior recesses yet throw a huge amount of light wherever they are installed. With a protrusion of only 38 mm, the FMS-Lamps are sleek and unobtrusive during the day but make themselves very well-known at night! Two light intensities are offered: the FMS1200 with 1200 lumens; and the FMS2500 with an even more powerful 2500 lumens. This light is the 2500 lumens option, but both lamps offer even close-range illumination directly underneath the lamp. The light is projected downwards at a fixed angle of 45 degrees, with no brackets to adjust. Hella Marine LED technology is the answer for energy-efficient, completely sealed, shock and vibration-resistant lighting. Advanced electronics provide consistent illumination and circuit protection across a range of inputs from 9–32VDC for a long service life. Features: Deck floodlight for surface mounting Low profile design Close-range illumination 2500 lumens Energy-efficient and durable LED technology Specifications: Housing Material: Die-cast aluminum, CoroSafe coating Lens: Widespread diffuser Mounting: Surface mount Lumen: 2500 lumens Color Temperature: 6500K (White) Cable: Pre-wired with 500mm cable Operating Voltage: Multivolt™ 9-32V DC, Nominal 12/24V DC Power Consumption: 28W Degree of Protection: IP 6K8 (Protection against dust and prolonged water immersion) IP 6K9K (Protection against dust and high-pressure/steam jet cleaning) Weight: 600g (including cable) Approvals: ECE-R10, RCM, ADR/ GGVSEB

LED Deck Light - White Housing - 1200 Lumens Hella Marine introduces the low profile and powerful FMS LED deck lamps. These surface-mount scene lamps are purpose-designed to integrate discreetly in tight spaces and exterior recesses yet throw a huge amount of light wherever they are installed. With a protrusion of only 38 mm, the FMS-Lamps are sleek and unobtrusive during the day but make themselves very well-known at night! Two light intensities are offered: the FMS1200 with 1200 lumens; and the FMS2500 with an even more powerful 2500 lumens. This light is a 1200 lumens option, but both lamps offer even close-range illumination directly underneath the lamp. The light is projected downwards at a fixed angle of 45 degrees, with no brackets to adjust. Hella marine LED technology is the answer for energy-efficient, completely sealed, shock and vibration-resistant lighting. Advanced electronics provide consistent illumination and circuit protection across a range of inputs from 9–32VDC for a long service life. Features: Deck floodlight for surface mounting Low profile design Close-range illumination 1200 lumens Energy-efficient and durable LED technology Specifications: Housing Material: Die-cast aluminum, CoroSafe coating Lens: Widespread diffuser Mounting: Surface mount Lumen: 1200 lumens Color Temperature: 6500K (White) Cable: Pre-wired with 500mm cable Operating Voltage: Multivolt™ 9-32V DC, Nominal 12/24V DC Power Consumption: 14W Degree of Protection: IP 6K8 (Protection against dust and prolonged water immersion) IP 6K9K (Protection against dust and high-pressure/steam jet cleaning) Weight: 600g (including cable) Approvals: ECE-R10, RCM, ADR/ GGVSEB

Surface Strip Light w/Switch - White/Red LEDs - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE

Surface Strip Light w/Switch - White/Blue LEDs - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE

NaviLED Deck Mount Port & Starboard Pair - 2nm - Colored Lens/White Housing Compact deck mount LED navigation lamps.  Attractive, power saving and ultra reliable. Ultra low current draw NaviLED® lamps use less than 10% of the power required to run a bulb navigation lamp of the same visible distance. Port and Starboard lamps consume less than 2W combined! No bulbs, No maintenance, Ultra long service life Hella marine LED technology has no filaments to break making NaviLED® lamps extremely shock and vibration proof for proven reliability and safety in demanding conditions. Multivolt™ 8-28V DC Advanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages. Safe and highly visible Hella marine optics deliver 100% correct light output and enhanced visibility compared to bulb navigation lamps. Fully sealed for life. IP 67 certified Each NaviLED® lamp is a completely sealed unit. High impact housings ensure durability from waves and impact. Specifications: Material Description: UV resistant, enhanced impact resistant acrylic lens High impact shroud Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats) Cable: Pre-wired with 500mm of twin core marine cable Operating Voltage: Multivolt 8-28V DC Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -700 volts Power Consumption: Port and Starboard less than 2W combined Degree of Protection: IP 67 - Completely Sealed Weight: 75g (including cable) Approvals:  IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ

NaviLED Deck Mount Port & Starboard Pair - 2nm - Clear Lens/White Housing Compact deck mount LED navigation lamps.  Attractive, power saving and ultra reliable. Ultra low current draw NaviLED® lamps use less than 10% of the power required to run a bulb navigation lamp of the same visible distance. Port and Starboard lamps consume less than 2W combined! No bulbs, No maintenance, Ultra long service life Hella marine LED technology has no filaments to break making NaviLED® lamps extremely shock and vibration proof for proven reliability and safety in demanding conditions. Multivolt™ 8-28V DC Advanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages. Safe and highly visible Hella marine optics deliver 100% correct light output and enhanced visibility compared to bulb navigation lamps. Fully sealed for life. IP 67 certified Each NaviLED® lamp is a completely sealed unit. High impact housings ensure durability from waves and impact. Specifications: Material Description: UV resistant, enhanced impact resistant acrylic lens High impact shroud Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats) Cable: Pre-wired with 500mm of twin core marine cable Operating Voltage: Multivolt 8-28V DC Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -700 volts Power Consumption: Port and Starboard less than 2W combined Degree of Protection: IP 67 - Completely Sealed Weight: 75g (including cable) Approvals:  IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ

NaviLED Deck Mount Port & Starboard Pair - 2nm - Colored Lens/Black Housing Compact deck mount LED navigation lamps.  Attractive, power saving and ultra reliable. Ultra low current draw NaviLED® lamps use less than 10% of the power required to run a bulb navigation lamp of the same visible distance. Port and Starboard lamps consume less than 2W combined! No bulbs, No maintenance, Ultra long service life Hella marine LED technology has no filaments to break making NaviLED® lamps extremely shock and vibration proof for proven reliability and safety in demanding conditions. Multivolt™ 8-28V DC Advanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages. Safe and highly visible Hella marine optics deliver 100% correct light output and enhanced visibility compared to bulb navigation lamps. Fully sealed for life. IP 67 certified Each NaviLED® lamp is a completely sealed unit. High impact housings ensure durability from waves and impact. Specifications: Material Description: UV resistant, enhanced impact resistant acrylic lens High impact shroud Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats) Cable: Pre-wired with 500mm of twin core marine cable Operating Voltage: Multivolt 8-28V DC Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -700 volts Power Consumption: Port and Starboard less than 2W combined Degree of Protection: IP 67 - Completely Sealed Weight: 75g (including cable) Approvals:  IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ

NaviLED Deck Mount Port & Starboard Pair - 2nm - Clear Lens/Black Housing Compact deck mount LED navigation lamps.  Attractive, power saving and ultra reliable. Ultra low current draw NaviLED® lamps use less than 10% of the power required to run a bulb navigation lamp of the same visible distance. Port and Starboard lamps consume less than 2W combined! No bulbs, No maintenance, Ultra long service life Hella marine LED technology has no filaments to break making NaviLED® lamps extremely shock and vibration proof for proven reliability and safety in demanding conditions. Multivolt™ 8-28V DC Advanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages. Safe and highly visible Hella marine optics deliver 100% correct light output and enhanced visibility compared to bulb navigation lamps. Fully sealed for life. IP 67 certified Each NaviLED® lamp is a completely sealed unit. High impact housings ensure durability from waves and impact. Specifications: Material Description: UV resistant, enhanced impact resistant acrylic lens High impact shroud Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats) Cable: Pre-wired with 500mm of twin core marine cable Operating Voltage: Multivolt 8-28V DC Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -700 volts Power Consumption: Port and Starboard less than 2W combined Degree of Protection: IP 67 - Completely Sealed Weight: 75g (including cable) Approvals:  IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ

High Intensity Outdoor Dimmable LED Spreader Light - White Lunasea Spreader offers 1,000 lumens of lights and focuses it from bow to stern. A spreader light that delivers. Designed for distance, engineered for quality. Using two of the brightest single point light source LED's married with a lens, Lunasea puts the light where you want it - On your boat deck! Most spreader lights cast a large quantity of light outside your boat while other spreaders focus their little intensity on small areas. If polarity is swapped on the power, the light dims down which is ideal for a beautiful night sipping on a cocktail. All this while only drawing 11 watts of power." Features: IP67 rated 3 different mounting positions 1,100 lumens of light White

LED Livewell Lamp - White Completely sealed, power-saving LED Livewell/Baitwell lamps are designed for installation into live bait tanks with wall thicknesses up to 26mm. Featuring a durable polycarbonate housing, the lamp provides soft light. Supplied with a plastic nut and rubber gaskets for a watertight seal, installation is swift and secure in often inaccessible locations. Features: Color: White LED Voltage: 12V IP67 Completely Sealed 5-Year Warranty Specifications: Housing Description: Heavy-duty polycarbonate Light Source: LED Installation: Pre-wired with 120mm of cable Operating Voltage: 12V DC Power Consumption: 0.5W (<0.04A@12V) Degree of Protection: Completely sealed Mounting: Single hole Rubber gaskets included

  Apelo Underwater Lighting Brilliance By Hella Marine Lets You Do It All Select between incredibly intense white or vibrant blue for amazing illumination experiences. Take complete control and choose any color you wish with Apelo RGB.     Apelo Redefines Entertaining Lighting Optical Intelligence delivers more visible light spread across the transom. Apelo competes with rivals offering higher lumen ratings, while using less energy to achieve equal brightness.     Turn Up The Party, Select The Mood, Switch On The Fish Magnets. Apelo Underwater Lighting Brilliance Lets You Do It All. Apelo shines with more lux in wide horizontal and narrow vertical illumination where it counts. For the lumens, Apelo has superior brightness using less energy. Thermal polymer is employed, an inert housing material 100% resistant to corrosion and suitable for any hull material. The optical nylon lens is incredibly tough and will not embrittle or discolor in harsh UV.   *Keep in mind, while some other manufacturers are no longer making lights for recreation marine, Hella Marine has a direct replacement for almost every product.     Specials    Closeouts    Remanufactured    Rebates

Surface Strip Light w/Switch - Warm White/Red LEDs - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE

2" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0 Black Oak LED's Marine Flush Mount Spreader Light is the perfect low profile mount for fiberglass T-Tops, gunwale mounting, and any other location where users need low-profile lighting with a huge output. This light uses 2 - 10w Cree LEDs, producing 1,560 lumens and throwing in a 90° pattern, which is perfect for lighting fore and aft decks as well as any area lighting that users may need. These lights are DuPont powder coated to make sure they can take sun and salt exposure and still look as great as the day they were purchased. All of Black Oak's lights have the highest IP rating available, IP69k, which means users don't have to worry about the location of these lights; they can take any amount of water thrown at them! Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Spreader light 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader Light Aft deck fishing lights Foredeck lights Accent lighting Game fishing lights Boat wake lights Technical Specifications: Total Wattage: 20W Amp. Draw: 1.4 LED Quantity: 2 Weight: 0.7 lbs. Raw Lumens: 1560 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Depth): 4-1/4" x 2-3/8" x 2-1/2”  Mounting Holes: 3-1/2” apart horizontally In the Box: 2” marine white spreader light Wiring pigtail  Stainless steel mounting kit *Sold as an Individual

Surface Strip Light w/Switch - White LED - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE

LED Surface Strip Light - White LED - 24V - No Switch The Surface Mount Strip lamps from Hella marine are completely sealed, UV and corrosion resistant with an ultra-low profile meaning these lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature:5000K (White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming" Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE