|
Molded Stick Clip Kit - 3/4" Clips
Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. the 3/4 in. clip will fit paddles from 5/8 inch to 7/8 inch and is YakGear’s preferred method of securing the YakGear - Yakstick Mud Anchor.
This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Molded rubber paddle clips allow for easy paddle or mud anchor storage
Two solid rubber-molded paddle clips are provided
3/4 in. clips fit paddles and mud anchors ranging from 5/8 to 7/8 in.
Installation instructions and hardware are included
1-year warranty
Specifications:
Size: 3/4 in. clips
|
8.00 |
|
|
Drain Plug And Receiver Kit - 3/4" Diameter
The Attwood Drain Plug and Receiver Kit ensures that a drain is closed properly.
Features:
Molded black plastic with threaded receiver
Molded retaining strap
Includes attaching screws and elastomeric gasket for a watertight fit
Specifications:
Diameter: (inch) 3/4"
*Intended for use on small recreational boats and jet skis
|
5.48 |
|
|
Leather Mooring Line Chafe Kit - 3/4"
Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
11.44 |
|
|
Jabsco Pump Head Only Brz Hk 040 Bsp
FEATURES
Pump Body:
Bronze Head Kit with Motor Adaptor
Port Size:
3/4" BSP internal thread
Flow:
up to 35 litres/minute @ 1500 RPM
Impeller:
Neoprene or Nitrile
Shaft Seal:
Carbon/Ceramic mechanical seal, Nitrile.
Shaft:
Stainless steel shaft extension
Motor Bracket:
Epoxy-coated aluminium, suitable for B3/B14 D80 frame motor to IEC 71 standard
APPLICATIONS / CHARACTERISTICS
Self primes from dry up to 3.0 metres. Handles hard or soft solids. Non pulsating flow. Gentle pump action does not damage shear-sensitive products. Easy to service and maintain.
INDUSTRIAL : From water to the most difficult, e.g. transferring foaming solutions with entrained air or solids, such as soap, circulating abrasive and non abrasive slurries. Transferring inks, dyes, starches etc.
CHEMICAL : Circulating and transferring various chemicals such as ammonia, barium, copper sulphate, glycerine, nickel chloride, silver nitrate; various acids such as boric, carbonic, citric and photo processing solutions
Jabsco Bronze Pump Head Only Kit 3/4" British Standard Pipe Internal Threads, Nitrile Impeller
|
509.13 |
|
|
Bosworth 74-B-3/4 3/4" Barb
Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 3/4” Hose Barb
|
24.21 |
|
|
Ampco Fluid End Aluminum Bronze Full Impeller for KC2 1 X 3/4
|
1758.24 |
|
|
Groco Ibv-750 3/4 Bronze Ball Valve
|
34.22 |
|
|
Ampco Pumps AC114MD56C-3.75 Peo 1 1/2 X 1 1/2 Kit 3.75
|
1668.60 |
|
|
Bosworth 74-3/4M Foot Check Valve
Bosworth Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 3/4” Male Threads
|
13.51 |
|
|
Ampco Bi8202801-4.50, Bronze Impeller for KC2
1 3/4
|
879.12 |
|
|
March TE-7K-MD 3.5" 3PH 3Ph 3/4 Hp 3.5" Imp Pump
|
1299.60 |
|
|
Molded Paddle/Pole Clip Kit - 1-1/4" Clips
Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. The 1-1/4 in. design fits most paddles and push-poles, ranging in circumference from 1-1/4 inch to 1-1/2 inch.
This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Molded rubber paddle clips allow for easy paddle or mud anchor storage
Two solid rubber-molded paddle clips are provided
1-1/4 clips fit paddles with a circumference ranging from 1-1/4 to 1-1/2 in.
Installation instructions and hardware are included
1-year warranty
Specifications:
Size: 1-1/4 in. clips
|
11.20 |
|
|
Universal Drain Plug Kit
Add or replace the drain plugs on any kayak with the YakGear Universal Drain Plug Kit. This kit provides the two most used kayak and paddleboat drain plugs with a wide thread (red washer) and a fine thread (black washer) to accommodate most paddlers. Both drain plugs come with a top flange.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Universal drain plug kit to add or replace old drain plugs
One wide thread drain plug and one fine thread drain plug provided
Installation instructions and hardware are included
1-year warranty
|
8.00 |
|
|
Trailer Frame Clips - Zinc - 3/8" Wide - 10-Pack
All trailer light kits come with a few of these clips, but never enough to secure the wiring along the frame as frequently as you want. With a pack or two of these clips, you can secure your drooping trailer wiring.
Features:
10 per pack
Zinc plated steel clips 3/8" wide
Grips edges up to 5/32" thick
WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3.62 |
|
|
Zig Zag Cleat Kit
This YakGear Zig Zag Cleat Kit comes with a 3-1/2-inch nylon zigzag cleat for kayaks, canoes, and small boats. The zigzag cleat provides a stable access point to secure anchors, drift chutes, bow lines, and safety lines. Zig-zag cleats require no knots to be tied, as the pressure from the lace-back design keeps all anchors in place using up to 3/8-inch rope.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Lace back design allows all anchors to stay in place using up to 3/8 in. rope
Installation instructions and hardware are included
1-year warranty
Specifications:
Zig Zag Cleat Size: 3-1/2 in.
|
7.20 |
|