|
Universal Drain Plug Kit
Add or replace the drain plugs on any kayak with the YakGear Universal Drain Plug Kit. This kit provides the two most used kayak and paddleboat drain plugs with a wide thread (red washer) and a fine thread (black washer) to accommodate most paddlers. Both drain plugs come with a top flange.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Universal drain plug kit to add or replace old drain plugs
One wide thread drain plug and one fine thread drain plug provided
Installation instructions and hardware are included
1-year warranty
|
8.00 |
|
|
Universal Scupper Plug Kit
Solve the problem of unknown sizes of lost scupper plugs with the YakGear Universal Scupper Plug Kit. Scupper plugs act as a sealant to the self-bailing scupper holes to keep extra water out of the cockpit of your sit-on-top kayak.
These plugs fit any scupper hole with a circumference ranging from 3/4 inch to 1-1/2 inch. Orders will be in increments of 4 pieces.
Features:
Universal scupper plugs fit any scupper hole ranging from 3/4 to 1-1/2 in.
Each kit contains 4 scupper plugs
Instructions included
1-year warranty
|
10.40 |
|
|
Drain Plug Kit
This drain plug was designed with a molded-in recess in the base to trap sealant, which provides a watertight seal. For transom installations, baitwells, ice chests, tanks, etc.
Kit Includes:
Drain plug and base (1)
Foam gasket (1)
10-32 X 1” OH machine screws (2)
10-32 Nyloc nuts (2)
#10 flat washers (2)
#10 well nuts (2)
Features:
Proudly constructed in the USA of UV-resistant injection molded nylon with stainless steel hardware.
Specifications:
Distance Between Mounting Holes: 1-1/2 in.
Fasteners Included: Yes
Weight: 0.08 lbs
|
6.19 |
|
|
Inteliplug ProXT Captive Drain Plug, Garboard Assembly, Sensor & Deutsch Plug Pigtail with Plug-and-Play Harness
The Seaview Inteliplug ProXT is a transom drain plug reimagined and engineered to be easy to use and impossible to lose.
Features:
ProXT comes with a hermetically sealed aeronautical grade sensor with a Deutsch plug pigtail
Ergonomic design so you don’t need tools
Spring-loaded captive cap (stays attached)
A direct replacement for the bronze and stainless traditional style garboards (520040, 520042, 520060)
Approved for all marine environments including saltwater.
Manufactured from durable marine-grade ABS + 15% fiber
NPT thread and a backup O-ring - watertight fit
2" outer diameter - fits in the same spot as your current garboard drain plug
Engineered transom gasket - no messy silicone needed
3 large individual drain cavities - plenty of flow area
Sensor with Deutsch DT04-2P plug pigtail including plug-and-play wire harness and alarm panel
|
129.60 |
|
|
Garboard Drain Plug Cast Bronze
Attwood's Bronze Garboard Drain Plug reliably provides bilge drainage when hauling out, and it seals securely when not draining. It has machined and tapered pipe threads to ensure a watertight plug fit, and the nut can be removed with a wrench or pliers. This drain plug has a 3/8-inch neck depth and a ½-inch NOT drain. It installs easily and securely using #8 screws in 3 countersunk holes.
|
13.07 |
|
|
Inteliplug ProX Captive Drain Plug, Garboard Assembly, Sensor & Deutsch Plug Pigtail
The Seaview Inteliplug ProX is a transom drain plug reimagined and engineered to be easy to use and impossible to lose.
Features:
ProX comes with a hermetically sealed aeronautical grade sensor with Deutsch plug pigtail
Ergonomic design so you don’t need tools
Spring-loaded captive cap (stays attached)
A direct replacement for the bronze and stainless traditional style garboards (520040, 520042, 520060)
Approved for all marine environments including saltwater.
Manufactured from durable marine-grade ABS + 15% fiber
NPT thread and a backup O-ring - watertight fit
2" outer diameter - fits in the same spot as your current garboard drain plug
Engineered transom gasket - no messy silicone needed
3 large individual drain cavities - plenty of flow area
|
52.80 |
|
|
Push-In Drain Plug for 1-1/8" Thru-Hull & All Purpose Drains
These push-in drain plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains.
Plugs are a perfect compliment to T-H Marine overflow drain tubes.
These pvc push-in drain plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal. They have double seal rings to assure positive sealing.
|
7.02 |
|
|
Push-In Drain Plug f/1-1/2" Thru-Hull Drains
These push-in drain plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains.
Plugs are a perfect compliment to T-H Marine overflow drain tubes.
These pvc push-in drain plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal. They have double seal rings to assure positive sealing.
|
11.26 |
|
|
Inteliplug Pro Captive Drain Plug & Garboard Assembly
The Seaview Inteliplug Pro is a transom drain plug reimagined and engineered to be easy to use and impossible to lose.
Features:
Ergonomic design so you don’t need tools
Spring-loaded captive cap (stays attached)
A direct replacement for the bronze and stainless traditional style garboards (520040, 520042, and 520060)
Approved for all marine environments including saltwater.
Manufactured from durable marine-grade ABS + 15% fiber
NPT thread and a backup O-ring - watertight fit
2" outer diameter - fits in the same spot as your current garboard drain plug
Engineered transom gasket - no messy silicone needed
3 large individual drain cavities - plenty of flow area
|
28.80 |
|
|
Oblong Captive Garboard Drain & Plug - 316 Stainless Steel
This Oblong Captive Garboard Drain & Plug sits lower in the stern for more water removal. Captive plug prevents plug from being lost. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH fasteners (not included).
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
21.13 |
|
|
Molded Stick Clip Kit - 3/4" Clips
Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. the 3/4 in. clip will fit paddles from 5/8 inch to 7/8 inch and is YakGear’s preferred method of securing the YakGear - Yakstick Mud Anchor.
This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Molded rubber paddle clips allow for easy paddle or mud anchor storage
Two solid rubber-molded paddle clips are provided
3/4 in. clips fit paddles and mud anchors ranging from 5/8 to 7/8 in.
Installation instructions and hardware are included
1-year warranty
Specifications:
Size: 3/4 in. clips
|
8.00 |
|
|
Brass Snap Handle Drain Plug - 1-1/4"
Snap-handle drain plugs feature cam action for easy installation and a leak proof seal. Simply turn the handle clockwise to tighten the plug then snap down the handle to lock. Durable stamped brass and nitrile rubber construction.
|
7.14 |
|
|
Drain Plug And Receiver Kit - 3/4" Diameter
The Attwood Drain Plug and Receiver Kit ensures that a drain is closed properly.
Features:
Molded black plastic with threaded receiver
Molded retaining strap
Includes attaching screws and elastomeric gasket for a watertight fit
Specifications:
Diameter: (inch) 3/4"
*Intended for use on small recreational boats and jet skis
|
5.48 |
|
|
T-Handle Brass Drain Plug - 1" Diameter
The T-Handle Drain Plugs are simply operated by a clockwise and counterclockwise turn of the T-handle, which expands and releases the drain plug.
Features:
Handle: Brass
For 1" diameter drains
*Sold as an Individual
|
5.40 |
|
|
T-Handle Stainless Steel Drain Plug - 1" Diameter
The T-Handle Drain Plugs are simply operated by a clockwise and counterclockwise turn of the T-handle, which expands and releases the drain plug.
Features:
Handle: Stainless steel
For 1" diameter drains
*Sold as an Individual
|
10.49 |
|