|
2 Leash Combo for Paddle & Pole
Keep a paddle or rod secure while paddling with the YakGear UniLeash. Quickly connecting the leash to the boat-side is done with a 360-degree nylon swivel hook to any pad eye or accessible seat strap. The connection to the paddle or rod is made through the upper-rope-loop-through method, which provides unrestricted movement while using a paddle or fishing rod. Perfect for one or two-piece paddles as well as one or two-piece rods. Paddle and rod are not included.
Features:
Two-leash combo
1/2-ounce, 40-in. paddle leashes
Made from 3/16 in. nylon bungee and 1/8 in. polypro rope
360° Swivel Hook
Instructions included
1-year warranty
|
16.80 |
|
|
3 Leash Combo for Paddle & Pole
Keep a paddle or rod secure while paddling with the YakGear UniLeash. Quickly connecting the leash to the boat side is done with a 360-degree nylon swivel hook to any pad eye or accessible seat strap. The connection to the paddle or rod is made through the upper-rope-loop-through method, which provides unrestricted movement while using a paddle or fishing rod. Perfect for one or two-piece paddles as well as one or two-piece rods. Paddle and rod are not included.
Features:
Three-leash combo
1/2-ounce, 40-in. paddle leashes
Made from 3/16 in. nylon bungee and 1/8 in. polypro rope
360° Swivel Hook
Instructions included
1-year warranty
|
22.40 |
|
|
Oval 2-Pin Base f/Angled Pole - Black
Part #: 91022-7
These 2-pin bases for angled pole lights with locking collars are well-suited for rough conditions or long poles. Features a soft rubber cover with a molded-in gasket to protect the socket from moisture and debris when pole light is stowed away. Provides a 2-pin socket and a 7.5 degree angle and installs on narrow gunwales or deck areas. Completely non-corrosive, they feature contacts which are nickel-plated to resist corrosion and multi-crimped for durability, and wire leads tinned for corrosion resistance.
Features:
Oval
2-Pin
Base specifically for angled pole
Black
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.01 |
|
|
Rectangle 2-Pin Base for Angled Pole - Zamak
The swivel cover protects the socket when light is stowed away. The socket is keyed to prevent incorrect insertion of the pole light. Three countersunk holes for installation fasteners.
Features:
Includes 7-1/2" hard wire leads for connection to 12V DC power supply
Contacts are nickel-plated to resist corrosion and multi-crimped for durability
Wire leads are tinned for corrosion-resistance
ZAMAK: Zinc Aluminum Magnesium and Copper (alloy)
Specifications:
Dimensions: (inch) 4" x 1-5/8". 1-3/8" dia. installation hole size
*Made for pole light
|
19.07 |
|
|
Molded Paddle/Pole Clip Kit - 1-1/4" Clips
Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. The 1-1/4 in. design fits most paddles and push-poles, ranging in circumference from 1-1/4 inch to 1-1/2 inch.
This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Molded rubber paddle clips allow for easy paddle or mud anchor storage
Two solid rubber-molded paddle clips are provided
1-1/4 clips fit paddles with a circumference ranging from 1-1/4 to 1-1/2 in.
Installation instructions and hardware are included
1-year warranty
Specifications:
Size: 1-1/4 in. clips
|
11.20 |
|
|
Paddle & Pole Keeper Kit
This Paddle & Pole Keeper Kit lets you easily store your pole or paddle and frees up your hands for other activities!
Specifications:
Constructed of injection molded nylon and polypropylene.
Fasteners included
Kit Includes:
18" of 1/4" bungee (2)
Bungee terminal ends with sleeve (4)
Lashing hooks with one hole (2)
10-32 X 3/4" PH machine screws (6)
10-32 Nyloc nuts (6)
#10 flat washers (6), trifold pop rivets (6)
Easy installation instructions
|
9.49 |
|
|
2.2lb Bruce Anchor
Coastal anchoring can be tough with anything other than the YakGear 2.2lb (1kg) Bruce Anchor. This 2.2-pound (1kg) galvanized steel plow anchor is the preferred anchor choice for coastal and near-shore fishermen.
The plow-shaped design allows the anchor to dig easily into the sand, silt, and muddy bottoms.
Features:
2.2lb galvanized steel Bruce Anchor
Self-orienting
1-year warranty
Note: It is recommended to use at least 3 times the depth of water as the length of the anchor rope in calm waters and 4 to 5 times the depth of the water in choppy waters or windy conditions.
|
10.40 |
|
|
2-Piece Quick Release Paddle
Aluminum performance paddle that breaks down into two separate pieces. 90.5" with an adjustable blade angle. Carry bag & (2) rubber drip guards included.
|
39.83 |
|
|
1/2" Bronze Combo Scoop Thru-Hull w/Nut
Features:
Designed for increased flow compared to standard Thru Hulls
NPSM / NPT combination thread
C83600 Bronze
Specifications:
Thread NPS: 1/2"
|
23.33 |
|
|
1-1/2" Bronze Combo Scoop Thru-Hull w/Nut
Features:
Designed for increased flow compared to standard Thru Hulls
NPSM / NPT combination thread
C83600 Bronze
Specifications:
Thread NPS: 1-1/2"
|
64.00 |
|
|
2" Bronze Combo Scoop Thru-Hull w/Nut
Features:
Designed for increased flow compared to standard Thru Hulls
NPSM / NPT combination thread
C83600 Bronze
Specifications:
Thread NPS: 2"
|
108.00 |
|
|
Clamp-On Flag Pole - 1/2" Diameter Stainless Steel Clamp & Pole
Features:
Clamp-On Flagstaff
Pole made of 304 S.S.
Clamp made of 316 S.S.
Diameter - 1/2,
Length - 17",
Clamp Tube Size-7/8"
|
39.82 |
|
|
2-1/2" Bronze Combo Scoop Thru-Hull w/Nut
Features:
Designed for increased flow compared to standard Thru Hulls
NPSM / NPT combination thread
C83600 Bronze
Specifications:
Thread NPS: 2-1/2"
|
157.33 |
|
|
Euro Black 2" Trim Gauge f/ Mercury/Mariner/Mercruiser/Volvo DP/Yamaha '01 and Newer
Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
2"- Hole Size: 2.0625" (53mm)
For Engine Types:
Mercury / Mariner / Mercruiser / Volvo DP / Yamaha '01 and Newer
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Factory P/N GP9374
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
25.32 |
|
|
Euro Black 2" Trim Gauge f/ Johnson/Evinrude/Suzuki Outboard
Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
2"- Hole Size: 2.0625" (53mm)
For Engine Types:
Johnson/Evinrude/Suzuki Outboards
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Factory P/N GP9305
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
25.80 |
|