GPSMAP® 1243xsv with GMR™ 18 HD3 Radome With its sleek design, powerful processing, and upgraded IPS display, this advanced 12" chartplotter integrates seamlessly into your Garmin marine system. Features: Easily integrate with more engines Connect to compatible third-party devices with OneHelm™ digital switching Easily build your marine system using the best network connectivity Navigate any waters with preloaded Garmin Navionics+™ charts and mapping See below for your boat's built-in sonar capabilities Manage your marine experience from nearly anywhere Ultra-High-Definition Scanning Sonar Get built-in ultra-high-definition sidevü and clearvü™ scanning sonars with vivid, high-contrast color palettes to help distinguish fish from structure. Gpsmap® X3 series also supports 1 KW chirp traditional sonar capabilities. Panoptix™ Sonar Support Pair with panoptix or livescope™ easy-to-interpret live sonar (transducer required, sold separately) to see all around your boat in real-time. Faster, Sharper, Smarter With its added processing power and slimline design featuring edge-to-edge glass and a smaller unit footprint, it’s easy to retrofit this plotter in a wider range of dash configurations. Improved Display Optics This higher-resolution display offers improved sunlight readability and visibility from any angle, with 50% more pixels than previous-generation GPSMAP devices. Preloaded Mapping Experience unparalleled coverage and detail with built-in Garmin Navionics+ integrated coastal and inland mapping that includes Auto Guidance+™ technology3 and a 1-year subscription for downloadable daily updates and more on select chartplotters. Optional Charts & Maps Bring a fresh look and feel to your chartplotter with the optional upgrade to Garmin Navionics Vision+™ premium chart subscription, featuring downloadable high-resolution relief shading, satellite imagery, sonar imagery, and more. Optional Radar Bundle To help you avoid weather and traffic on the water, the compact 4 kW GMR™ 18 HD+ dome radar is available as a bundled option with your GPSMAP chartplotter/sonar package. Power-Pole® Shallow Water Anchor By networking select Garmin chartplotters with a force® trolling motor and your compatible power-pole shallow water anchoring system, you can access advanced boat control features from your plotter, including smart anchor auto-deployment, smart anchor jog, auto stow, anchor drag detection, and auto guidance end-of-route anchoring. Spend more time fishing and less time positioning. Garmin Sailassist™ Sailing Features  View laylines, race start line guidance, enhanced wind rose, heading and course-over-ground lines, true wind data fields, tide/current/time slider, wind angle, set and drift, wind speed, polars, and more. Sailing Polars Use the polar table to see key data, including how fast you should go at a certain wind angle and speed, so you know whether you need to adjust sail trim. Garmin Marine Network If you have multiple compatible Garmin devices on your boat, you can share information—such as maps, user data, radar, and IP camera video—among them. NMEA 2000® and NMEA 0183 Networks Connect to compatible autopilots, digital switching, weather, fusion-link™ audio system, media, VHF, AIS, and more from one screen. Activecaptain® App Built-in wi-fi® connectivity pairs with the free all-in-one mobile app for access to the onechart™ feature, smart notifications, software updates, helm, Garmin quickdraw™ community data, and more. Integrated Ant® Technology Connect with some of your favorite devices, such as Quatix® marine watches, gWind™ wireless 2 transducers, GNX™ wind marine instruments, and wireless remote controls. Engine Connectivity Now you can connect your chartplotter to different kinds of engines, including select Yamaha engines. OneHelm Feature This feature brings together all the operations and capabilities of select third-party devices, such as EmpirBus™ digital switching, on one screen. Send inReach® Device Messages Pair your inreach satellite COMMUNICATOR5 to your chartplotter and type custom messages using your mfd’s on-screen keyboard. Access your contact list or enter an email, inreach address, or phone number. You can also group messages by conversation for a texting-like experience. In the Box (chartplotter): GPSMAP 1243xsv chartplotter microSD™ card preinstalled Power cable NMEA 2000® T-connector NMEA 2000 drop cable (2 meters) 8-pin transducer to 12-pin sounder adapter cable Bail mount kit with knobs Flush mount kit with gasket Protective cover Trim-piece snap covers Documentation In the Box (radome): GMR 18 HD3 dome radar Power cable (49.21 ft) Network cable (49.21 ft) Mounting hardware kit and template Installation instructions General: Dimension: 12.1" x 8.9" x 3.2" (30.8 x 22.8 x 8.2 cm) Weight: 6.6 lbs (3.0 KG) Waterproof: IPX7 Touchscreen: Yes Display Type: WXGA Display Size: 10.3" x 6.4"; 12.1" diagonal (26.2 x 16.3 cm; 30.7 cm diagonal) Display Resolution: 1280 x 720 pixels Mounting Options: Bail, flush, or flat (Garmin does not offer any hardware or accessories for a flat-mount installation. Professional tools and knowledge is required.) Input: Touchscreen Maps & Memory: Accepts Data Cards: 2 MicroSD cards (Back of Unit) Waypoints: 5000 Track Points: 50,000 Tracks: 50 saved tracks Navigation Routes: 100 Sensors: GPS: Yes     Glonass: Yes Galileo: Yes Has Built-In Receiver: Yes     Receiver: 10Hz NMEA 2000 Compatible: Yes NMEA 0183 Compatible: Yes Supports WAAS: Yes Built-In Maps: Built-in Auto Guidance+: Yes Garmin Navionics+ Inland & Coastal: Yes Tide Tables: Yes Optional Map Support:  Garmin Navionics+™: Yes Garmin Navionics Vision+™: Yes Topo 100K: Yes Standard Mapping: Yes Garmin Quickdraw Contours: Yes Raster Chart Support: Yes Chartplotter Features: Smart Mode Compatible: Yes AIS: Yes     DSC: Yes Supports Fusion-Link™ Compatible Radios: Yes GSD Black Box Sonar Support: Yes GCV Black Box Sonar Support: Yes Activecaptain® Compatible: Yes Grid (Garmin Remote Input Device) Compatible: Yes Wireless Remote Compatible: Yes Sailing Features: Yes Spoken Audio Alerts: Yes Onehelm Support: Yes Electrical Features: Power Input: 10 to 32 Vdc Typical Current Draw at 12 Vdc: 1.37 A Maximum Current Draw at 12 Vdc: 3.20 A Maximum Power Usage at 10 Vdc: 40.2w Sonar Features & Specifications: Displays Sonar: Yes Power Output: 1 KW Traditional Sonar (Dual Frequency/Beam): Built-in (Single Channel Chirp, 50/70/83/200 Khz, L, M, H Chirp) Clearvü: Built-in 260/455/800/1000/1200 kHz Sidevü: Built-in 260/455/800/1000/1200 kHz Panoptix™ Sonar: Yes Livescope: Yes Connections: NMEA 2000® Ports: 1 Connections NMEA0183 Input Ports: 1 NMEA 0183 Input (TX) Ports: 1 Video Input Ports: 1 (BNC Composite) Video Output Ports: 1 HDMI J1939 Ports: 1 Garmin Marine Network Ports: 2 12-Pin Transducer Ports: 1 USB Ports: Yes BNC External GPS Antenna Port: Yes Bluetooth® Pairing: Yes Ant+ (Connectivity): Yes Garmin Wi-Fi Network (Local Connection): Yes

GPSMAP® 943xsv with GMR™ 18 HD3 Radome With its sleek design, powerful processing, and upgraded IPS display, this advanced 9" chartplotter integrates seamlessly into your Garmin marine system. Features: Easily integrate with more engines Connect to compatible third-party devices with OneHelm™ digital switching Easily build your marine system using the best network connectivity Navigate any waters with preloaded Garmin Navionics+™ charts and mapping See below for your boat's built-in sonar capabilities Manage your marine experience from nearly anywhere Ultra-High-Definition Scanning Sonar Get built-in ultra-high-definition sidevü and clearvü™ scanning sonars with vivid, high-contrast color palettes to help distinguish fish from structure. Gpsmap® X3 series also supports 1 KW chirp traditional sonar capabilities. Panoptix™ Sonar Support Pair with panoptix or livescope™ easy-to-interpret live sonar (transducer required, sold separately) to see all around your boat in real-time. Faster, Sharper, Smarter With its added processing power and slimline design featuring edge-to-edge glass and a smaller unit footprint, it’s easy to retrofit this plotter in a wider range of dash configurations. Improved Display Optics This higher-resolution display offers improved sunlight readability and visibility from any angle, with 50% more pixels than previous-generation GPSMAP devices. Preloaded Mapping Experience unparalleled coverage and detail with built-in Garmin Navionics+ integrated coastal and inland mapping that includes Auto Guidance+™ technology3 and a 1-year subscription for downloadable daily updates and more on select chartplotters. Optional Charts & Maps Bring a fresh look and feel to your chartplotter with the optional upgrade to Garmin Navionics Vision+™ premium chart subscription, featuring downloadable high-resolution relief shading, satellite imagery, sonar imagery, and more. Optional Radar Bundle To help you avoid weather and traffic on the water, the compact 4 kW GMR™ 18 HD+ dome radar is available as a bundled option with your GPSMAP chartplotter/sonar package. Power-Pole® Shallow Water Anchor By networking select Garmin chartplotters with a force® trolling motor and your compatible power-pole shallow water anchoring system, you can access advanced boat control features from your plotter, including smart anchor auto-deployment, smart anchor jog, auto stow, anchor drag detection, and auto guidance end-of-route anchoring. Spend more time fishing and less time positioning. Garmin Sailassist™ Sailing Features  View laylines, race start line guidance, enhanced wind rose, heading and course-over-ground lines, true wind data fields, tide/current/time slider, wind angle, set and drift, wind speed, polars, and more. Sailing Polars Use the polar table to see key data, including how fast you should go at a certain wind angle and speed, so you know whether you need to adjust sail trim. Garmin Marine Network If you have multiple compatible Garmin devices on your boat, you can share information—such as maps, user data, radar, and IP camera video—among them. NMEA 2000® and NMEA 0183 Networks Connect to compatible autopilots, digital switching, weather, fusion-link™ audio system, media, VHF, AIS, and more from one screen. Activecaptain® App Built-in wi-fi® connectivity pairs with the free all-in-one mobile app for access to the onechart™ feature, smart notifications, software updates, helm, Garmin quickdraw™ community data, and more. Integrated Ant® Technology Connect with some of your favorite devices, such as Quatix® marine watches, gWind™ wireless 2 transducers, GNX™ wind marine instruments, and wireless remote controls. Engine Connectivity Now you can connect your chartplotter to different kinds of engines, including select Yamaha engines. OneHelm Feature This feature brings together all the operations and capabilities of select third-party devices, such as EmpirBus™ digital switching, on one screen. Send inReach® Device Messages Pair your inreach satellite COMMUNICATOR5 to your chartplotter and type custom messages using your mfd’s on-screen keyboard. Access your contact list or enter an email, inreach address, or phone number. You can also group messages by conversation for a texting-like experience. In the Box (chartplotter): GPSMAP 943xsv chartplotter microSD™ card preinstalled Power cable NMEA 2000® T-connector NMEA 2000 drop cable (2 meters) 8-pin transducer to 12-pin sounder adapter cable Bail mount kit with knobs Flush mount kit with gasket Protective cover Trim-piece snap covers Documentation In the Box (radome): GMR 18 HD3 dome radar Power cable (49.21 ft) Network cable (49.21 ft) Mounting hardware kit and template Installation instructions General: Dimension: 9.2” x 6.4” x 3” (23.3 x 16.2 x 7.6 cm) Weight: 3.6 lbs (1.6 KG) Waterproof: IPX7 Touchscreen: Yes Display Type: WXGA Display Size: 7.8” x 4.4”; 9.0” diagonal (19.9 cm x 11.2 cm; 22.9 cm diagonal) Display Resolution: 1280 x 720 pixels Mounting Options: Bail, flush, or flat (Garmin does not offer any hardware or accessories for a flat-mount installation. Professional tools and knowledge are required.) Input: Touchscreen Maps & Memory: Accepts Data Cards: 2 MicroSD cards (Back of Unit) Waypoints: 5000 Track Points: 50,000 Tracks: 50 saved tracks Navigation Routes: 100 Sensors: GPS: Yes     Glonass: Yes Galileo: Yes Has Built-In Receiver: Yes     Receiver: 10Hz NMEA 2000 Compatible: Yes NMEA 0183 Compatible: Yes Supports WAAS: Yes Built-In Maps: Built-in Auto Guidance+: Yes Garmin Navionics+ Inland & Coastal: Yes Tide Tables: Yes Optional Map Support:  Garmin Navionics+™: Yes Garmin Navionics Vision+™: Yes Topo 100K: Yes Standard Mapping: Yes Garmin Quickdraw Contours: Yes Raster Chart Support: Yes Chartplotter Features: Smart Mode Compatible: Yes AIS: Yes     DSC: Yes Supports Fusion-Link™ Compatible Radios: Yes GSD Black Box Sonar Support: Yes GCV Black Box Sonar Support: Yes Activecaptain® Compatible: Yes Grid (Garmin Remote Input Device) Compatible: Yes Wireless Remote Compatible: Yes Sailing Features: Yes Spoken Audio Alerts: Yes Onehelm Support: Yes Electrical Features: Power Input: 10 to 32 Vdc Typical Current Draw at 12 Vdc: 1.37 A Maximum Current Draw at 12 Vdc: 3.20 A Maximum Power Usage at 10 Vdc: 40.2w Sonar Features & Specifications: Displays Sonar: Yes Power Output: 1 KW Traditional Sonar (Dual Frequency/Beam): Built-in (Single Channel Chirp, 50/70/83/200 Khz, L, M, H Chirp) Clearvü: Built-in 260/455/800/1000/1200 kHz Sidevü: Built-in 260/455/800/1000/1200 kHz Panoptix™ Sonar: Yes Livescope: Yes Connections: NMEA 2000® Ports: 1 Connections NMEA0183 Input Ports: 1 NMEA 0183 Input (TX) Ports: 1 Video Input Ports: 1 (BNC Composite) J1939 Ports: 1 Garmin Marine Network Ports: 1 12-Pin Transducer Ports: 1 USB Ports: Yes BNC External GPS Antenna Port: Yes Bluetooth® Pairing: Yes Ant+ (Connectivity): Yes Garmin Wi-Fi Network (Local Connection): Yes

GMR 18 HD3 18" Radar Dome This compact 18" dome radar combines ease of use with powerful scanning features that work to maximize your confidence and situational awareness on the water. Features: 4 KW power output, 36 nautical mile max range Space-saving 18" dome Marpa target tracking Dynamic auto gain and sea filter Dual-radar support Quiet dome drive motor Dual-Radar Support  Using dual radar provides redundancy and allows each display unit on the boat to pull data from one of two different radar sources. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Radar Overlay Overlay radar images onto your chartplotter’s map page. You can add an optional autopilot or heading sensor (sold separately) for the best results. MARPA Target Tracking MARPA tracks selected targets to help keep track of other vessels and avoid collisions (with appropriate sensors, sold separately). Low-Noise Scanning  The reliable GMR HD3 dome drive motor spins at a fixed 24 rpm, offering reliable, low-noise operation and minimal power consumption. Compact and Powerful 4 kW of transmit power, a 36 nautical mile maximum range, and clear echo definition at all ranges. Close-In Target Scanning Minimum scanning range of 20 meters for excellent short-range detection and target detail. High-Resolution Radar 8-bit true color for outstanding target separation with less screen clutter. Timed Transmit Mode Specify transmit times down to the seconds to help reduce power consumption. Intuitive operation No complex user settings, so it’s easy to install and start using. In the Box: GMR 18 HD3 dome radar Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions General: Dimensions: 20" diameter, 9.8" high (508 mm diameter, 248 mm high) Weight: 7.0 kg Waterproof: IPX7 Antenna length: 17" (43 cm) Rotation Speed (RPM): 24 rpm Beam Width: 5.2° horizontal, 25° vertical Maximum Range: 36 nm Minimum Range: 20 meters Radar Type: Radome Electrical Features: Power Input: 11-32 v DC Power Consumption (Standby): 15 W Typical Power Consumption, Transmitting (Normal Mode): 40 W Transmit Power: 4 KW Radar Features: Overlay: Yes Dual Radar Support: Yes Auto Gain: Dynamic MARPA Target Tracking: Yes (requires heading sensor, sold separately)

GMR 18 xHD3 18" Radar Dome Loaded with advanced features typically found on open arrays, this powerful 18" dome radar offers superior traffic, obstacle, and weather detection for peace of mind on the water. Features: 4 KW power output, 48 nautical mile max range Scan-averaging technology Improved target-size processing Split-screen dual-range display Bird detection Quiet dome-drive motor Scan Averaging Technology  A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. Faster Scanning Antenna  Rotation speeds up to 60 rpm improve the redraw rate for faster target updates. True Echo Trails A historical "trail" of boats on the water is displayed on the screen, removing relative motion influences to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range settings and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore, and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance thanks to a narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium, and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface, where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. In the Box: GMR 18 xHD3 dome radar Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions General: Dimensions: 20" x 9.8" (508 mm x 248 mm) Weight: 7.0 kg Waterproof: IPX7 Antenna length: 17" (43 cm) Rotation Speed (RPM): Up to 60 RPM, depending on settings Beam Width: 5.2° horizontal, 25° vertical Maximum Range: 48 nm Minimum Range: 20 meters Radar Type: Radome Electrical Features: Power Input: 11-32 v DC Power Consumption (Standby): 15 W Typical Power Consumption, Transmitting (Normal Mode): 40 W Transmit Power: 4 KW Radar Features: Dual Range: Yes Overlay: Yes Dual Radar Support: Yes Auto Bird Gain: Yes Auto Gain: Dynamic MARPA Target Tracking: Yes (requires heading sensor, sold separately) Echo Trails: True Target Size: Yes Scan Averaging: Yes

GPSMAP® 1243xsv Combo GPS/Fishfinder GN+ GET A SHARPER VIEW FROM YOUR CONNECTED HELM With its sleek design, powerful processing and upgraded IPS display, this advanced 12” chartplotter integrates seamlessly into your Garmin marine system. Easily integrate with more engines.  Connect to compatible third-party devices with OneHelm™ digital switching.  Easily build your marine system using the best of network connectivity.  Navigate any waters with preloaded Garmin Navionics+™ charts and mapping1. See below your boat with built-in sonar capabilities.  Manage your marine experience from nearly anywhere2.   Ultra High-Definition Scanning Sonar Get built-in Ultra High-Definition SideVü and ClearVü™ scanning sonars with vivid, high-contrast color palettes to help distinguish fish from structure. GPSMAP® X3 series also supports 1 kW CHIRP traditional sonar capabilities. Panoptix™ Sonar Support Pair with Panoptix or LiveScope™ easy-to-interpret live sonar (transducer required, sold separately) to see all around your boat in real time. Faster, Sharper, Smarter With its added processing power and new slimline design featuring edge-to-edge glass and a smaller unit footprint, it’s easy to retrofit this plotter in a wider range of dash configurations. Preloaded Mapping Experience unparalleled coverage and detail with built-in Garmin Navionics+ integrated coastal and inland mapping that includes Auto Guidance+™ technology3 and a 1-year subscription for downloadable daily updates and more on select chartplotters. Optional Charts and Maps Bring a fresh new look and feel to your chartplotter with optional upgrade to Garmin Navionics Vision+™ premium chart subscription, featuring downloadable high-resolution relief shading, satellite imagery, sonar imagery and more. Garmin Sailassist™ Sailing Features View laylines, race start line guidance, enhanced wind rose, heading and course-over-ground lines, true wind data fields and tide/current/time slider, wind angle, set and drift, wind speed, polars and more3. Sailing Polars Use the polar table to see key data, including how fast you should go at a certain wind angle and speed — so you know whether you need to adjust sail trim. Garmin Marine Network If you have multiple compatible Garmin devices on your boat, you can share information — such as maps, user data, radar and IP camera video — among them. NMEA 2000® and NMEA 0183 Networks Connect to compatible autopilots, digital switching, weather, Fusion-Link™ audio system, media, VHF, AIS and more from one screen. Activecaptian® APP Built-in Wi-Fi® connectivity pairs with the free all-in-one mobile app for access to the OneChart™ feature, smart notifications, software updates, Helm, Garmin Quickdraw™ Community data and more4. Integrated ANT® Technology Connect with some of your favorite devices, such as quatix® marine watches, gWind™ Wireless 2 transducers, GNX™ Wind marine instruments and wireless remote controls. Engine Connectivity Now you can connect your chartplotter to different kinds of engines, including select Yamaha engines. OneHelm Feature This feature brings together all the operations and capabilities of select third-party devices, such as EmpirBus™ digital switching, on one screen. Send inReach® Device Messages Pair your inReach satellite communicator5 to your chartplotter, and type custom messages using your MFD’s on-screen keyboard. Access your contact list or enter an email, inReach address or phone number. You can also group messages by conversation for a texting-like experience. What's In The Box? Chartplotter microSD preinstalled Power cable NMEA 2000 T-connector NMEA 2000 drop cable Bail mount with knobs Flush mount kit with gasket Protective cover Trim piece snap covers Documentation Connections NMEA 2000® Ports: 1 NMEA 0183 Input Ports: 1 NMEA 1083 Input (TX) Ports: 1 Video Input Ports: 1 (BNC composite) Video Output Ports: 1 HDMI J1939 Ports: 1 Garmin Marine Network Ports: 2 12-Pin Transducer Ports: 1 USB Ports: 1 BNC External GPS Antenna Port: 1 Bluetooth® Pairing ANT+ (Connectivity) Garmin Wi-Fi Network (Local Connection) GPSMAP x3 chartplotters are preloaded with Garmin Navionics+ offshore, coastal, and inland water charts for the U.S. and Canada 1On select models 2Requires ActiveCaptain app on your compatible smartphone paired to the GPSMAP 1243xsv 3Auto Guidance+ is for planning purposes only and does not replace safe navigation operations 4When paired with a compatible smartphone 5Active satellite subscription required. Some jurisdictions regulate or prohibit the use of satellite communication devices. It is the responsibility of the user to know and follow all applicable laws in the jurisdictions where the device is intended to be used. Wi-Fi is a registered trademark of the Wi-Fi Alliance. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Power Cable Power your Garmin radar with this 48' long threaded cable. Compatible Devices: GMR™ 1204 xHD Open Array Radar and Pedestal GMR™ 1206 xHD Open Array Radar and Pedestal GMR™ 18 HD Radome GMR™ 18 Radome GMR™ 8 xHD Radome GMR™ 24 GMR™ 24 HD Radome GMR™ 24 xHD Radome GMR™ 404 xHD Open Array Radar and Pedestal GMR™ 406 xHD Open Array Radar and Pedestal GMR™ 604 xHD Open Array Radar and Pedestal GMR™ 606 xHD Open Array Radar and Pedestal WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

PP5200-20 PowerPod Pre-Cut for Garmin GPSMAP® 1223, 1223xsv, 1243 & 1243xsv PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base. PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability. NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets. All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods. PowerPods: Protection, Convenience, Security.

SailPod Uncut Usable Face 15.18″w x 9.85″h (38.6cm w x 25cm h) for Garmin GPSMAP® 1223/1243xsv - 9.5″ Wide Guard SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your fingertips… “Where you need it when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style! Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

SystemPod Pre-Cut for Garmin GPSMAP® 1223, 1223xsv, 1243 & 1243xsv on Right & 2 Instruments (3.6″ holes) on Left for 9.5″ Wide Guard GP1170-25 for Sail: SystemPod Pre-Cut for Garmin GPSMAP 1223/1223xsv/1243/1243xsv on the right AND two instruments (3.6″ holes) on the left for 9.5″ wide guard  SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips… “Where you need it when you need it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen. This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK129 Stanchion Kit. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

GPSMAP® 923xsv Combo GPS/Fishfinder - Worldwide GET A SHARPER VIEW FROM YOUR CONNECTED HELM With 50% more touchscreen pixels and nearly double the processing power of previous-generation 9” GPSMAP devices, this crisp chartplotter/sonar combo with a high-resolution IPS display integrates seamlessly into your Garmin marine system. Features: Easily integrate with more engines. Connect to compatible third-party devices with OneHelm™ digital switching. Easily build your marine system using the best network connectivity. Compatible with premium maps and charts1 for the best in Garmin navigation. See below your boat with built-in sonar capabilities. Manage your marine experience from nearly anywhere2. ULTRA HIGH-DEFINITION SCANNING SONAR Get built-in Ultra High-Definition SideVü and ClearVü scanning sonars with vivid, high-contrast color palettes to help distinguish fish from the structure. GPSMAP 923xsv also supports 1 kW CHIRP traditional sonar capabilities. PANOPTIX™ SONAR SUPPORT Pair with Panoptix or Panoptix LiveScope™ easy-to-interpret live sonar (transducer sold separately) to see all around your boat in real-time. FASTER, SHARPER, SMARTER With its added processing power and new slimline design featuring edge-to-edge glass and a smaller unit footprint, it’s easy to retrofit this 9” plotter in a wider range of dash configurations. IMPROVED DISPLAY OPTICS Higher-resolution 9” IPS displays offer improved sunlight readability and visibility from any angle, with 50% more pixels than previous-generation 9” GPSMAP devices. OPTIONAL BLUECHART® G3 VISION® CHARTS These optional charts offer the best of Garmin and Navionics® data, Auto Guidance3 technology and other premium navigation features. OPTIONAL RADAR BUNDLE To help you avoid weather and traffic on the water, the compact 4 kW GMR™ 18 HD+ dome radar is available as a bundled option with your GPSMAP chartplotter/sonar package. GARMIN MARINE NETWORK If you have multiple compatible Garmin devices on your boat, you can share information — such as maps, user data, radar, and IP camera video — among them. NMEA 2000® AND NMEA 0183 NETWORKS Connect to compatible autopilots, digital switching, weather, Fusion-Link™ audio system, media, VHF, AIS, and more from one screen. ACTIVECAPTAIN® APP Built-in Wi-Fi® connectivity pairs with the free all-in-one mobile app for access to the OneChart™ feature, smart notifications, software updates, Garmin Helm™ digital switching, Garmin Quickdraw™ Community data, and more4. INTEGRATED ANT® TECHNOLOGY Connect with some of your favorite devices, such as quatix® marine watches, gWind™ Wireless 2 transducers, GNX™ Wind marine instruments, and wireless remote controls. J1939 CONNECTIVITY Now you can connect your chartplotter to different kinds of engines, including select Yamaha engines. ONEHELM FEATURE This exclusive feature brings together all the operations and capabilities of select third-party devices, such as EmpirBus™ digital switching, on one screen. What's In The Box? GPSMAP 923xsv chartplotter microSD™ card preinstalled Power cable NMEA 2000® T-connector NMEA 2000 drop cable (2 meters) 8-pin transducer to 12-pin sounder adapter cable Bail mount kit with knobs Flush mount kit with gasket Protective cover Trim piece snap covers Documentation 1 Sold separately 2 Requires ActiveCaptain app on your compatible smartphone paired to the GPSMAP 723xsv 3 Auto Guidance is for planning purposes only and does not replace safe navigation operations 4 When paired with your compatible smartphone Wi-Fi is a registered trademark of the Wi-Fi Alliance.

SailPod Pre-Cut for Garmin GPSMAP® 1223, 1223xsv, 1243 & 1243xsv for 12″ Wide Guard SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your fingertips… “Where you need it when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style! Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

GMR 24 xHD3 24" Radar Dome Loaded with advanced features typically found on open arrays, this powerful 24" dome radar offers superior traffic, obstacle, and weather detection for peace of mind on the water. Features: 4 KW power output, 48 nautical mile max range Scan-averaging technology Improved target-size processing Split-screen dual-range display Bird detection Quiet dome-drive motor Scan Averaging Technology  A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. Faster Scanning Antenna  Rotation speeds up to 60 rpm improve the redraw rate for faster target updates. True Echo Trails A historical "trail" of boats on the water is displayed on the screen, removing relative motion influences to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range settings and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore, and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance thanks to a narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium, and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface, where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. In the Box: GMR 24 xHD3 dome radar Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions General: Dimensions: 25.4" x 9.8" (64.5 cm x 24.9 cm) Weight: 7.0 kg Waterproof: IPX7 Antenna length: 17" (43 cm) Rotation Speed (RPM): Up to 60 RPM, depending on settings Beam Width: 3.7° horizontal, 25° vertical Maximum Range: 48 nm Minimum Range: 20 meters Radar Type: Radome Electrical Features: Power Input: 11-32 v DC Power Consumption (Standby): 15 W Typical Power Consumption, Transmitting (Normal Mode): 40 W Transmit Power: 4 KW Radar Features: Dual Range: Yes Overlay: Yes Dual Radar Support: Yes Auto Bird Gain: Yes Auto Gain: Dynamic MARPA Target Tracking: Yes (requires heading sensor, sold separately) Echo Trails: True Target Size: Yes Scan Averaging: Yes

GMR™ 434 xHD3 4' Open Array Radar & Pedestal - 4kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 72-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor  New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 4 kW open array radar with 4’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     4' array - 1325 x 122 x 170 mm / 52.2" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     4' array and pedestal - 27.6 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 48 in. (122 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.8° horizontal, 23° vertical Maximum Range: 72 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 11-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 55 W Transmit Power: 4 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 436 xHD3 6' Open Array Radar & Pedestal - 4kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 6’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 72-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 4 kW open array radar with 6’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     6' array - 1938 x 122 x 170 mm / 76.5" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     6' array and pedestal - 29.6 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 72 in. (183 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.1° horizontal, 23° vertical Maximum Range: 72 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 11-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 55 W Transmit Power: 4 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 1234 xHD3 4' Open Array Radar & Pedestal - 12kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 96-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 12 kW open array radar with 4’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     4' array - 1325 x 122 x 170 mm / 52.2" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     4' array and pedestal - 27.7 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 48 in. (122 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.8° horizontal, 23° vertical Maximum Range: 96 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 10-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 70 W Transmit Power: 12 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.