|
Spreader Light - White/Red - Surface Mount
Spreader light, White/Red light, Surface mount with 2 holes for mounting (4mm).
Specifications:
Light Color: White
Dimensions Metric: Ø65mm x 12,5mm
Certification: This Light is designed and manufactured to comply with IEC 60945
Dimensions Imperial: 2.56" x 0.5"
Approved To: IEC 60945
EAN: 5704438022423
IP Rating: IP68
UPC Code: 879343022556
Current Consumption (mA @ 12VDC): 250
Current Consumption (mA @ 24VDC): 125
Vessel Size: All Sizes
Weight (Kg): 0 Kg
Weight (Oz): 0.00 Oz
|
280.30 |
|
|
Caprera3 Spreader Light - White/Red Dimming - White Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
135.80 |
|
|
Caprera3 Spreader Light - White/Red Dimming - Black Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
135.80 |
|
|
Capri3 Spreader Light - White/Red Dimming - White Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
135.80 |
|
|
Capri3 Spreader Light - White/Red Dimming - Black Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
135.80 |
|
|
Series 400-080-26 - 30W Deck/Spreader Light - White - Silver Housing
Lopolight started out back in 2004, offering many solutions and neat combinations for all-size boats and yachts. The tradition continues.
Lopolight offers a full range of navigation lights dedicated for boats and yachts, resulting in an elegant, compact, and precise solution with good value for money.
Features:
Single light - Deck/Spreader
Dimmable
Technical Specifications:
Wattage - 2NM
Vessel size - All sizes
Operating Voltage - 20 - 32 VDC
Number of LED Bulbs - 3
Light Color - White
Mounting - Vertical/Horizontal
Materials - Anodized aluminum
Connection - 2.46' (0.7M) cable
IP rating - IP68
Weight - 24.69oz (.27kg)
Certifications:
IEC 60945
In the Box:
Deck/Spreader light w/0.75 meter cable
Mounting hardware
Installation guide
*Sold as an Individual
|
1552.98 |
|
|
SR-L Series Marine Spreader Light - White Surface Mount - White Light with Red Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
127.49 |
|
|
SR-L Series Marine Spreader Light - White Surface Mount - White Light with White Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
157.50 |
|
|
SR-L Series Marine Spreader Light - White Surface Mount - White Light with Blue Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
157.50 |
|
|
SR-L Series Marine Spreader Light - White Flush Mount - White Light with Red Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
112.49 |
|
|
SCM-SL Series Flush Mount Spreader Light - White Housing - White/Blue/Red
The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.
Features:
Soft start technology ramps the brightness up gently over 2 seconds.
Power toggle feature to set brightness and change color
True white LED for best color performance
High-efficiency switch mode power supply
Waterproof low-profile aluminum housing
White or black finish
Unique reflector design to reduce glare
Specifications:
1500 lumen output
60-degree beam angle
16-watt power draw
10-30 volts Input
1.4A at 12 volts, 0.7A at 24 volts
6200 Kelvin cool white color temperature
5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth.
IP67 waterproof design
Durable glass lens
The full-color version includes Shadow-NET® interface for controlling color
Includes:
Spreader light
Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version
Quick start guide
Standard 2 year warranty
|
226.80 |
|
|
SCM-SL Series Bracket Mount Spreader Light - White Housing - White/Blue/Red
The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.
Features:
Soft start technology ramps the brightness up gently over 2 seconds.
Power toggle feature to set brightness and change color
True white LED for best color performance
High-efficiency switch mode power supply
Waterproof low-profile aluminum housing
White or black finish
Unique reflector design to reduce glare
Specifications:
1500 lumen output
60-degree beam angle
16-watt power draw
10-30 volts Input
1.4A at 12 volts, 0.7A at 24 volts
6200 Kelvin cool white color temperature
5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth.
IP67 waterproof design
Durable glass lens
The full-color version includes Shadow-NET® interface for controlling color
Includes:
Spreader light
Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version
Quick start guide
Standard 2 year warranty
|
249.60 |
|
|
SR-L Series Marine Spreader Light - White Flush Mount - White Light with White Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
135.00 |
|
|
SR-L Series Marine Spreader Light - White Flush Mount - White Light with Blue Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
135.00 |
|
|
4" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0
With the increasing size of boats and the major popularity of Black Oak's 4" Marine Scene Spreader Lights, Black Oak's 4 Inch Flush Mount Marine Spreaders were born. Perfect for larger center consoles, sportfish yachts, and many other applications. This light gives off a whopping 3,120 raw lumens and a very widespread 120-degree light pattern.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Spreader light
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Spreader Light
Aft deck fishing lights
Foredeck lights
Accent lighting
Game fishing lights
Boat wake lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 0.35 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height x Depth): 6-3/8" x 3-3/16" x 2-1/4”
Mounting Holes: 5-5/8” apart horizontally
In the Box:
4” marine white flush mount spreader light
Wiring pigtail
Stainless steel mounting kit
*Sold as an Individual
|
147.00 |
|