Premier Wiper Arm - Stainless Steel - Single - 15-20" Combine the heavy-duty construction and materials of the Premier wiper arm line with a built-in wet-arm system that allows for a clean and easy installation of a washer system. A simple and easy way to keep your windshield clean, the Premier wet arms feature a black PVC hose that runs up the center of the arm and ends in a four-nozzle fixture that is an integral part of the wiper arm itself. Each solid brass nozzle is adjustable to provide a maximum coverage spray pattern for almost any windshield. Features: Compatible with 2.5 and 1.5 MRV wiper motors Wet single-wiper style Physical Specifications: Each in Package Height (in): 0.6" Each in Package Width (in): 3.1" Each in Package Length/Depth (in): 19.5" Each in Package Weight (oz): 12.8"

Premier Wiper Arm - Stainless Steel - Single - 20"-25" Combine the heavy-duty construction and materials of the Premier wiper arm line with a built-in wet-arm system that allows for a clean and easy installation of a washer system. A simple and easy way to keep your windshield clean, the Premier wet arms feature a black PVC hose that runs up the center of the arm and ends in a four-nozzle fixture that is an integral part of the wiper arm itself. Each solid brass nozzle is adjustable to provide a maximum coverage spray pattern for almost any windshield. Features: Compatible with 2.5 wiper motors Wet single-wiper style Physical Specifications: Each in Package Height (in): 1" Each in Package Width (in): 2.9" Each in Package Length/Depth (in): 21.5" Each in Package Weight (oz): 12.96"

Wiper Arm Deluxe Stainless Steel Single - 14"-20" Deluxe arms are used on Standard and Heavy-Duty motors. Features: Stainless Steel Arm has "articulating/bend-back" feature Motor shaft mounting has additional set screw clamping Compatible with 2.5, 1.5, 1000, MRV wiper motors Dry single wiper style

Wiper Arm Deluxe Stainless Steel Single - 6.75"-10.5" Deluxe arms are used on Standard and Heavy-Duty motors. Features: Stainless Steel Arm has "articulating/bend-back" feature Motor shaft mounting has additional set screw clamping Compatible with 2.5, 1.5, 1000, MRV wiper motors Dry single wiper style

Wiper Arm Deluxe Stainless Steel Single - 10"-14" Deluxe arms are used on Standard and Heavy-Duty motors. Features: Stainless Steel Arm has "articulating/bend-back" feature Motor shaft mounting has additional set screw clamping Compatible with 2.5, 1.5, 1000, MRV wiper motors Dry single wiper style

Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V Low Pitch Features: All Stainless Steel Inside & Out 304 Stainless Steel inside and out including a sealed sound unit No rust Guaranteed for 5 years All meet ABYC A-23 for boats up to 12 meters Pre-wired It fits existing hole patterns Specifications: Dimensions: 3"L, 3-1/4"W, 1-3/4"H (7.5 x 8 x 4.5 cm) Max Amp Draw: 3 Amps. Grill Dimensions: 4-7/8" x 2-3/8" with 4" hole centers Rating: 106 dB @ 1 Meter Installed

Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V High Pitch Features: High pitched 304 Stainless steel inside and out 5-year Guarantee Prewired Mounting holes have 4" centers Hardware not included 3"L x 3-1/4"W x 1-1/2"H (7.5 x 8 x 4.5cm)

Stainless Steel Single Block - 25mm Sheave Diameter for 25mm Stanchion Pivoting A single block intended for use on a dinghy. The block is light, reliable, and has good performance. Applications: For stanchion applications - furling system line Specifications: Materials Composite sheave and 316L stainless steel grade cheeks Rope size: (inch) 5/16"-25/64" / (mm) 8-10 Length: (inch) 3 47/64" / (mm) 95 Width: (inch) 2 3/32" / (mm) 53 Thickness: (inch) 53/64" / (mm) 21 Sheave Diameter: (inch) 63/64" / (mm) 25 Working load: (lb) 610 / (mm) 280 Breaking load: (lb) 880 / (mm) 400 Weight: (lb) 0.154 / (g) 70 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual

SS75H Stainless Steel Thru-Hull 20° Tilt 600W Chirp - High Frequency High-Frequency CHIRP Transducer with Temperature with Stainless Steel Thru-Hull. Features: Function: Depth,Temperature Frequency: 130-210 kHz Mount Style: Thru-Hull, Flush, 20 Degree Tilt Housing Material: Stainless Steel Install Type: Thru-Hull Power Rating: 600W This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SS60 Stainless Steel Thru-Hull 20° Tilt, 50/200, 10-Pin Stainless Steel Thru-Hull Transducer with Temp, 600W (10-Pin), 20° Tilted Element. If a thru-hull flush-style transducer is called for, the Tilted Element SS60-SLTD/20 will accommodate a deadrise angle between 16° and 24°. This transducer compensates for deadrise by angling the element inside the housing. The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation.  Features: 600 Watts 50/200 kHz 45/12 degree Beam Angles Stainless Steel Thru-Hull with Temperature 30' Cable with 10-Pin Connector

MaxBlast Stainless Steel Trumpet 12V Horn - Single MaxBlast Single Trumpet Air Horn is constructed of durable stainless steel.  When installed, the trumpet should point slightly downward to permit water drainage. Specifications: Stainless Steel Single 12V WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

xSonic SS175H-W/20 Stainless Steel Chirp Transducer - 20° 1KW Tilted Element - 9 Pin Connector SS175H-W/20 CHIRP Transducers enable bottom detection down to 300m+ with 5 to 10 times greater detail and Resolution so precise it's possible to distinguish between individual bait Fish, game Fish, and underwater structures. *This Transducer is designed for smaller boats up to 36 feet (11 m). Features Frequencies: 130-210 kHz @ 25° constant beamwidth 16° - 25° Deadrise 300m+ Usable Depth 6m+ or large Boat size with Steel or Aluminum hulls Depth & Temperature CHIRP Technology High-Performance Stainless Steel Exclusive Transducer ID 9-Pin Connector, 10M Cable

Deck Fill for Carbon Canister System - Angled Body & Scalloped Stainless Steel Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. Features: Fits 1-1/2 (inch) fill hose Compatible with Ethanol blended fuels Designed and tested to prevent water from entering the fuel system All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling EPA / CARB Certified Dual 1 psi overpressure relief safety valves built into the deck fill caps Automatic nozzle shutoff 4-18 gpm Deck Fill for Carbon Canister System, angled, stainless steel, single pack

Seaview Stainless Steel Guard for 20" to 24" Radar Domes Protect your radome from damage and reduce wear and tear on the sails with Seaview Mast Mount Guards. Manufactured from marine grade 316 stainless steel and finished with a high polish. No extra fastenings required, mounted using the radome bolts. Fits easily between the mast mount and radar antenna. Compatible Units: Furuno - 24" Radomes Geonav - 24" Radomes Garmin - GMR24(HD) Radomes Humminbird - HB2124 CHIRP Radar  JRC - JUE 500 (24"), JMA-5104, NKE-2042 (24")  Koden - 24" (MDC 900 Series) Radomes  Raymarine - Quantum/ Quantum2, 24" Radomes and 60STV  Simrad - HALO24, DX64S  Sitex - 24" (T761) Radomes and 25" Radomes  Thrane & Thrane - Sailor FB500, Fleet55+ 

Stud Catch Length: 1-16/16" Width: 3/8" Fastener: #6(2) Material: 316 Stainless Steel