|
Performance Bucket - Black n' Tan - Tan with Black Handle
Your everyday, disposable five-gallon bucket is constructed of an inexpensive, ordinary high-density polyethylene, the same material used to make milk jugs and sandwich bags. It’s cheap and readily available and a good choice for a low-cost, disposable product.
The HUCK Performance Bucket is constructed of a proprietary blend of performance polymers known as SpryTech, specially formulated for extreme strength and durability, yet lightweight and with uncommon resistance to wear, temperature, and chemicals.
Features:
HUCK’s polymer blend offers excellent UV stabilization (won’t degrade when subjected to constant sunlight)
BPA-free, so it is food-safe
Woodgrain HUCK label
Specifications:
Color: Black N' Tan (tan with black handle)
Height (inch): 13 5/8″
Mouth diameter (inch): 11.5″
Weight: 3 lbs.
Base Diameter (inch): 10.5″
|
119.94 |
|
|
Performance Bucket - Black n' Blue - Blue with Black Handle
Your everyday, disposable five-gallon bucket is constructed of an inexpensive, ordinary high-density polyethylene, the same material used to make milk jugs and sandwich bags. It’s cheap and readily available and a good choice for a low-cost, disposable product.
The HUCK Performance Bucket is constructed of a proprietary blend of performance polymers known as SpryTech, specially formulated for extreme strength and durability, yet lightweight and with uncommon resistance to wear, temperature, and chemicals.
Features:
HUCK’s polymer blend offers excellent UV stabilization (won’t degrade when subjected to constant sunlight)
BPA-free, so it is food-safe
Gray HUCK label
Specifications:
Color: Black n' Blue (blue with black handle)
Height (inch): 13 5/8″
Mouth diameter (inch): 11.5″
Weight: 3 lbs.
Base Diameter (inch): 10.5″
|
119.94 |
|
|
Performance Bucket - Black Ops - Black with Black Handle
Your everyday, disposable five-gallon bucket is constructed of an inexpensive, ordinary high-density polyethylene, the same material used to make milk jugs and sandwich bags. It’s cheap and readily available and a good choice for a low-cost, disposable product.
The HUCK Performance Bucket is constructed of a proprietary blend of performance polymers known as SpryTech, specially formulated for extreme strength and durability, yet lightweight and with uncommon resistance to wear, temperature, and chemicals.
Features:
HUCK’s polymer blend offers excellent UV stabilization (won’t degrade when subjected to constant sunlight)
BPA-free, so it is food-safe
Gray HUCK label
Specifications:
Color: Black Ops (black with black handle)
Height (inch): 13 5/8″
Mouth diameter (inch): 11.5″
Weight: 3 lbs.
Base Diameter (inch): 10.5″
|
119.94 |
|
|
Performance Bucket - Tuxedo - White with Black Handle
Your everyday, disposable five-gallon bucket is constructed of an inexpensive, ordinary high-density polyethylene, the same material used to make milk jugs and sandwich bags. It’s cheap and readily available and a good choice for a low-cost, disposable product.
The HUCK Performance Bucket is constructed of a proprietary blend of performance polymers known as SpryTech, specially formulated for extreme strength and durability, yet lightweight and with uncommon resistance to wear, temperature, and chemicals.
Features:
HUCK’s polymer blend offers excellent UV stabilization (won’t degrade when subjected to constant sunlight)
BPA-free, so it is food-safe
Gray HUCK label
Specifications:
Color: Tuxedo (white with black handle)
Height (inch): 13 5/8″
Mouth diameter (inch): 11.5″
Weight: 3 lbs.
Base Diameter (inch): 10.5″
|
119.94 |
|
|
HUCK Performance Buckets
Every HUCK Performance Bucket is designed and engineered for peak performance - made from performance polymers and built to last a lifetime. HUCK Performance Buckets is a small, Maryland-based business that proudly makes and assembles buckets right here in the great United States of America.
|
|
|
Haight Pump 10U-N Pump W/Neo Lip Sl No R/V
Features
Pump Body:Ductile Iron
Shaft Seal:Neoprene Lip Seal
Port Size:Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT
GPM 10
The Haight 10U-N is a Ductile Iron Gear Pump, square flanged Pump End Only less motor, 10 GPM rated, with Ductile Iron Construction, Neoprene Lip Seal, Steel Shaft, Steel Gears, Iron Rotor and Bearings. The standard construction materials of this pump are Ductile Iron Housing, Steel Shaft and Pinion Gears, Iron Rotor and Bearings, Buna N Lip Seals and Elastomers. These gear pumps have a Gear within a gear internal design and is very effective at handling a broad range of applications while operating at standard motor speeds, and reducing wear. Both of these operating characteristics play an important role in minimizing overall capital investment, and operating expenses. Compact rugged, and easy to maintain, these pumps are ideally suited to close-coupled mounting, or direct mounting to the motor. These pumps can operate at standard motor speeds, eliminating the need for pulleys/gear reducers. The involute gear design offers excellent suction characteristics, and minimizes noise and reduces internal bypassing It comes standard with self-lubricating gramix iron bearings, and easy to maintain Buna-N lip seals. The seals are installed in the UniverSeal design for simple and quick replacement, or change to alternate seal style. This is just the bare pump end, but there are optional mounting brackets which are designed for in-line mounting with standard NEMA frame size motors or bedplate mounting. These pumps are self-priming and will develop up to 27 inches of vacuum. Pumps will operate in either direction, and flow direction in the pump can be changed without disrupting the attached piping, or special tools. The is the standard pump model and it does not come with the relief valve but if required it has the flexibility of a bolt-on, integral Relief Valve assembly (sold as an extra adder) - the relief valve assembly can be added at any time, in the field, with no special tools.
Applications
Petroleum Products,
Machine Manufacturing Applications
Machine Tools, Hydraulic Equipment
Lubrication Systems
Diesel Engines
Food Processing
Restaurant Equipment
Misc. Chemical Applications
Glue and Ink
Soap and Detergent Products
Building and Highway Contractors
Paper Products Industries
Automotive Applications
Shipbuilding Applications
Beverage Applications
Aircraft Applications
Mining Applications
|
1057.56 |
|
|
T-Handle Latch - Black Flexible Rubber w/Keeper
Small Size (50 Series) is 112mm (4.81") when latched
These flexible handle latches adapt well to alignment irregularities in field use. But no matter how they are mounted or latched, their non-corrosive non-conductive UV-resistant thermoplastic elastomer handles provide consistent vibration-absorbing benefits for quiet and secure closure.
The flexible, black thermoplastic elastomer handle is enhanced with a variety of additional features and options to provide smooth trouble-free performance under real-world conditions.
Built-in drag keeps latch handle stationary when unlatched
Curved T-handle style provides sure grip for operating latch
Different sizes and mounting styles accommodate a range of panel thicknesses
Indented keeper ensures positive latching
Provides intuitive ease of operation
Completely non-corrosive materials
Standards and Specifications
Flammability Rating: UL94-HB
Industry Applications
Automotive, Trucks
Construction Equipment, Off-Road Vehicles, Farm Equipment
Exhibits/Signs
Food Equipment
Industrial Machinery, Machine Tools, Metal Cutting
Lawn/Garden Equipment
Marine
|
8.35 |
|
|
Euro Black 2" Tank Level Gauge - Potable Water
Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
Level gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...
As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level.
2" - Hole size: 2.0625" (53mm)
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Factory P/N GP9324
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
25.32 |
|
|
Euro Black 2" Tank Level Gauge - Potable Water (Metric)
Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
Level gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...
As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level.
2" - Hole size: 2.0625" (53mm)
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Factory P/N GP9326
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
25.37 |
|
|
Euro Black 4" Tachometer w/Systemcheck 7000 RPM (Gas) f/ Johnson / Evinrude Outboard)
Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
Electronic tachometers work by counting pulses generated by the ingition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed above.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine.
4" - Hole size: 3.375" (85mm)
For Engine Types:
Johnson and Envinrude Outboard
SystemCheck Warnings:
No Oil
Engine Overheat
Check Engine
Low Oil
Specifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Factory P/N TC9951
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
154.78 |
|
|
Chesapeake Black 4" Speedometer w/ LCD Heading Display - 80MPH (GPS)
Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
The GPS Speedometer is a drop in replacement for your current speedometer to match your existing instrument dash.
GPS information is gathered from an internal GPS antenna. No external antenna required. The Faria GPS Speedometer uses a highly accurate 48 channel GPS receiver. You can be sure that the Faria GPS Speedometer is giving you the most accurate GPS information available on the market today.
Course Over Ground (COG) and actual heading (compass heading over ground) are displayed on the digital LCD.
Speed data is shown by an analog pointer. This pointer is driven by a digital stepper motor for increased accuracy and minimized pointer bounce during vessel operation.
Benefits:
No external GPS antenna required
Ultra fast Satellite acquisition time (TTFF) 1 second from Hot start
Speed Accuracy of +/- 1 MPH
Heading Accuracy of +/- 1 Degree
Ideal replacement for speed sensing devices (pitot tube and paddle wheel) that fail over time
Perfect for slow moving vessels where pitot tubes just don't work
Deutsch connectors
4"- Hole Size: 3.375" (85mm)
Specifications:
Anti-scratch glass lens
Perimeter lighted back light
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N SGP012
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
275.50 |
|
|
Chesapeake Black 5" Tachometer w/Digital Hourmeter - 6000 RPM (Gas) (Inboard)
Perimeter-lighted black dial with stylish blue and white graphics, polished stainless steel bezel, contoured White pointer, and domed glass lens.
Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12vDC, Ground and one of the signal sources listed above.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
5" - Hole size: 4.375" (112mm)
Specifications:
Anti-scratch glass lens
Perimeter lighted back light
12 VDC negative ground
Can be adapted for 24 VDC systems
Scale - 0 to 10000 Hours
Factory P/N TCH323
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
209.93 |
|
|
Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - Black
The Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).
*This wedge base is a direct replacement for the gray wedge base that comes with the Starlink antenna.
Features:
Designed to fit the Starlink Flat High-Performance Antenna.
Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
Drilled and tapped for the cable seal that is already provided with the Starlink antenna.
No need to cut the Starlink connectors for installation.
Pre-drilled with the Seaview modular top hole pattern for the option to fit on top of any Seaview modular mount.
|
254.40 |
|
|
All-Black Deluxe Megaphone w/Siren - 15W
Features:
15W Deluxe Megaphone
Built-in selectable electronics alarm siren
Volume control
Includes carrying strap
All-black, tactical appearance
|
70.50 |
|
|
Sikaflex® 295 UV - Black - 10oz Tube with Nozzle
Exterior sealant and direct glazing adhesive for organic glass in Marine applications. Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine business. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).
Features:
Excellent application properties
Resistant to aging and weathering
Suitable for organic glasses
Areas of Application
Sikaflex®-295 UV has been specially developed for the marine industry, where it is used to bond and seal plastic glazing materials in boats and ships. Because of its excellent weatherability this product can also be used to seal joints in exposed areas. Suitable substrates are aluminum (bright or anodized), GRP (polyester resin), stainless steel, timber, 2-component coatings, and plastic glazing materials (PC, PMMA). Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-295 UV on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Product Benefits:
Excellent application properties
Resistant to aging and weathering
Suitable for organic glasses
Approved for the OEM market
Wheelmark approved
Surface Preparation:
Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants. Surface treatment depends on the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates.
Application:
Sikaflex®-295 UV can be processed between 10 °C and 35 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C.
Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use. To ensure a uniform thickness of the bonding it is recommended to apply the adhesive in form of a triangular bead.
Tooling & Finishing
Tooling and finishing must be carried out within the skin time of the product. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use.
Removal
Uncured Sikaflex®-295 UV can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin.
Overpainting
Sikaflex®-295 UV can be painted prior to and after the formation of the skin. If the painting process takes place after the sealant has built a skin, adhesion could be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 prior to the painting process. If the paint requires a baking process (> 80 °C), the best performance is achieved by allowing the sealant to fully cure first. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than that of sealants. This could lead to cracking of the paint in the joint area.
|
18.79 |
|