MKA-60 Stabilizer Kit Reduces bounce on bow-mount trolling motors. Equipped with a low profile mounting base that allows the stabilizer to be easily removed. The pivoting arm can be folded down when not in use. Features: Reduces motor bounce in the stowed position Absorb vibrations to protect the motor shaft Folds down when not in use Multiple mounting orientations to fit your boat configuration Easily removable, it leaves only a low-profile base Stabilizer shafts can be cut to fit Multi-position strap adjusts to accommodate all shaft sizes Includes Stainless steel mounting hardware Compatible with the QUEST series RT Instinct, Ulterra, RT Terrova, Terrova, and Ulterra, Riptide Ulterra, Terrova, Riptide Terrova, Riptide ST, PowerDrive, Riptide PowerDrive, PowerDrive V2, Riptide SP, and PowerDrive Pontoon

MKA-50 Bow-Mount Stabilizer Kit for Fortrex Features: Reduces motor bouncing when in stowed position Attaches to the left or right side of bowguard Pivots into vertical position and rests on the boat deck when motor is stowed Rotates in the horizontal position with bowguard when the motor is deployed Includes rubber bumper to protect deck finish Stainless steel hardware tested for saltwater use Fits any Fortrex or Riptide SF bow-mount trolling motor WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKA-58 Boat Deck Reinforcement Kit Provides additional strength, stability, and versatility for mounting Minn Kota Quest series RT Instinct, Ulterra, Terrova, and RT Terrova trolling motors. Features: Provides additional strength and stability for mounting Minn Kota Quest series trolling motors Helps to distribute torque loads associated with higher thrust motors Can be installed directly to the boat deck or in combination with MKA-56 / RTA-55 quick-release bracket Multiple mounting hole patterns allow for flexible installation Includes stainless steel hardware Designed for use in saltwater Compatible with Ulterra, Terrova, Riptide Terrova, and Riptide Instinct QUEST series trolling motors

A durably constructed Minn Kota Drift Sock slows down your drift to enable proper bait presentation over holding fish. 34" deep x 22" diameter Features 210 denier ripstop nylon with 4 heavy-duty 1" nylon straps WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

A durably constructed Minn Kota Drift Sock slows down your drift to enable proper bait presentation over holding fish. 34" deep x 22" diameter Features 420 denier ripstop nylon with 4 heavy-duty 1" nylon straps Weights at the bottom and floats at the top are sewn into the edge of the opening to allow the sock to open instantly when thrown into the water WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKA-49 Cable & Handle For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design with an ultra-strong, abrasion-resistant, coated stainless steel braided cable. Features: Compatible with cable steer bow-mount motors: Fortrex, Maxxum, Edge, Riptide SF, Riptide SM and Riptide SE WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rope & Handle For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design and durable, abrasion-resistant 48" nylon rope. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

  Double Down! 2019 Minn Kota Talon Promotion   To receive your rebate, purchase (2) two qualifying Minn Kota Talon 12' or 15' models now until June 30th, 2019. Receive up to $500 by submitting online only.  Don't miss out on this fantastic offer!   Offer valid now until June 30th, 2019.     Save $500 on Two Minn Kota Talon   It's the only shallow water anchor that goes down to 15' deep. The only one you can control from anywhere on the boat. And the only one with User-Selectable Anchoring Modes that let you anchor in anything. When it comes to dominating shallow water, Talon is the only name you need to know.   Offer valid now until June 30th, 2019.         Specials    Closeouts   Remanufactured    Rebates  

Don't miss out on Minn Kota's Endura Transom Mount trolling motors promotion now until June 15th, 2008.  For all the detail please check out our Rebate Corner.

  RAPTOR IS RELENTLESS   Raptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you're anchoring, what's happening to your boat, and what to do next. It reads the bottom, senses the anchoring force and reacts automatically to keep you locked down until the moment you're ready to change spots. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.     FIND THE RAPTOR FOR YOUR RIG   Raptor shallow water anchors install hydraulically and can anchor down to 8' or 10'. Match your boat with black, red, silver, and white models.     JUST THE RIGHT AMOUNT OF HOLD   Select Raptor models features Active Anchoring, This revolutionary anchoring technology continuously monitors anchoring force and adjusts to keep you pinned to the bottom.       Specials    Closeouts    Remanufactured    Rebates  

  RAPTOR IS RELENTLESS   Raptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you're anchoring, what's happening to your boat, and what to do next. It reads the bottom, senses the anchoring force and reacts automatically to keep you locked down until the moment you're ready to change spots. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.     FIND THE RAPTOR FOR YOUR RIG   Raptor shallow water anchors install hydraulically and can anchor down to 8' or 10'. Match your boat with black, red, silver, and white models.     JUST THE RIGHT AMOUNT OF HOLD   Select Raptor models features Active Anchoring, This revolutionary anchoring technology continuously monitors anchoring force and adjusts to keep you pinned to the bottom.       Specials    Closeouts    Remanufactured    Rebates  

Troll-Tamer™ for Minn Kota Fortrex/Ultrex Trolling Motor Stabilizer Lock 5"-8" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Maxxum Trolling Motor Stabilizer Lock 5"-8" Spacing  The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 2-3/4"-4-1/2" Spacing  The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 8"-12" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.