|
Both Snap-Tite and Turn-Tite Adjustable Boat Bailer Plugs are available in this handy four-color countertop display carton. This super, silent salesman generates impulse buying of one of the most popular boat accessories.
|
304.99 |
|
|
Both Snap-Tite and Turn-Tite Adjustable Boat Bailer Plugs are available in this handy four-color countertop display carton. This super, silent salesman generates impulse buying of one of the most popular boat accessories.
|
229.99 |
|
|
CAL PUMPS
A/C Circulation Pump - Air Conditioning & Cooling - Air Conditioning - Seawater Circulation Pump - Magnetic Drive Small Pond Pump
CAL customers rely on our stainless steel and bronze pumps, and once you've owned one, you'll know why. Four different models are offered at CLR Marine with flow rates from 320 gph to 1,200 gph cover a wide variety of uses. All pumps in this series come with a one-year warranty and will provide trouble free use in fresh or salt water. You can even use it in hot water up to 110°F!
6' power cords are standard.
Features & Benefits of the CAL PUMPS:
One year warranty
UL Listed for consumer confidence
Premium stainless steel and bronze construction for longevity
Six or twenty foot power cord for convenience
Suitable for fresh or salt water applications
Can be used in hot water applications up to 110°F
Extremely quiet operation
Use submerged or in open air
Corrosion resistant
115 or 220 volt motors
Thermally protected
Optional Mounting Bracket Available (model MSUB OR MSUBM)
Do Not Run Dry
Operate horizontal or volute down
MS320 have ½” MNPT intake and ¼” MNPT discharge
MS580, 900, 1200 have ¾” MNPT intake and ½” MNPT discharge
Cal 1200 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS1200
Cal 900 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS900
Cal 580 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS580
Cal 320 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS320
See all Cal Pump Products
S T A I N L E S S S T E E L & B R O N Z E P U M P S
Model
AMPS
(MIN/MAX)
WATTS
(MIN/MAX)
MAX
FLOW
MAX
HT.
1'
3'
5'
7'
9'
11'
13'
15'
17'
MS320
1.05-1.30
68-89
375
12.7'
360
335
305
262
215
-
-
-
-
MS580
2.15-2.55
138-203
860
14'
830
750
675
580
475
345
125
-
-
MS900
2.17-2.76
156-234
885
16'
855
790
725
650
560
460
350
175
-
MS1200
2.97-3.79
208-312
1100
18'
1070
1000
925
850
760
675
560
425
225
Cal Pumps at CLR Marine
|
|
|
Special alloy brass or aluminum tube flanged 90 degrees one end, functions as a drain for transom, motorwell, livewell or baitwell. Designed for use with Moeller's Snap Tite, Turn Tite, and Trail N Bail plugs. Use brass drain tubes with brass plugs and aluminum drain tubes with aluminum plugs. 12 per pack, sold individually. Display packed.
|
11.99 |
|
|
Special alloy brass or aluminum tube flanged 90 degrees one end, functions as a drain for transom, motorwell, livewell or baitwell. Designed for use with Moeller's Snap Tite, Turn Tite, and Trail N Bail plugs. Use brass drain tubes with brass plugs and aluminum drain tubes with aluminum plugs. 12 per pack, sold individually. Display packed.
|
21.99 |
|
|
Special alloy brass or aluminum tube flanged 90 degrees one end, functions as a drain for transom, motorwell, livewell or baitwell. Designed for use with Moeller's Snap Tite, Turn Tite, and Trail N Bail plugs. Use brass drain tubes with brass plugs and aluminum drain tubes with aluminum plugs. 12 per pack, sold individually. Display packed.
|
8.39 |
|
|
Special alloy brass or aluminum tube flanged 90 degrees one end, functions as a drain for transom, motorwell, livewell or baitwell. Designed for use with Moeller's Snap Tite, Turn Tite, and Trail N Bail plugs. Use brass drain tubes with brass plugs and aluminum drain tubes with aluminum plugs. 12 per pack, sold individually. Display packed.
|
15.99 |
|
|
Corrosion resistant twist-action plug for mounting from inside the transom. Adjusts to provide tightest possible seal, won't jar loose under vibration. Designed for use with Moeller drain tubes.
|
9.39 |
|
|
Corrosion resistant twist-action plug for mounting from inside the transom. Adjusts to provide tightest possible seal, won't jar loose under vibration. Designed for use with Moeller drain tubes.
|
6.70 |
|
|
Corrosion resistant cam-action plug for mounting only from inside the transom. Adjusts to provide tightest possible seal, won't jar loose under vibration. Designed for use with 1" Moeller drain tubes.
|
12.49 |
|
|
Corrosion resistant cam-action plug for mounting only from inside the transom. Adjusts to provide tightest possible seal, won't jar loose under vibration. Designed for use with 1" Moeller drain tubes.
|
9.11 |
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
Major Rebuild Kit for Sherwood M-71
This kit contains the following items
MS DATA SHEET
1
DATA SHEET
ON 3008400
1
MTG GSKT FOR P17XX PUMPS
SH 10514C
1
LIP SEAL
SH 10515C
1
SCREW & WASHER
SH 10615K
1
IMPELLER KIT
SH 10944
1
CAM BRASS LARGE CHRYSLER
SH 12211
2
BALL BEARING
SH 12710
3
LOCKWASHER
SH 12857
3
SCREW
SH 12859
1
SEAL/SEAT ASSEMBLY
SH 25150
1
WEAR PLATE
SH 4258
2
SNAP RING (SMALL)
SH 4259
2
SNAP RING (LARGE)
SH 4264
1
WASHER
SH 4432
1
KEY
SH 5133
1
SPACER
Kits are put together at time of order
|
345.23 |
|
|
Walbro FRA-1-1 Electric Fuel Pump
Voltage: 12V DC
Weight: 1.63 lb
Minimum Flow Rate: 20 gph
Dry Lift: 24"
Service Life: 5,000+ hr
Fuse: 5A
Current Draw: 2.0 Amps
Inlet/Outlet: 1/8-27 NPSF
Inlet Filter Screen: 70 Micron
Magnetic Trap: None
Outlet Check Valve: No
Maximum Output Pressure: 4.0 - 7.0 psi
The FRA Series electric fuel pump operates at a constant frequency — it will continue to cycle as long as electric power is supplied.
If there is no demand for fuel, the pump will build pressure in the fuel delivery line - up to its rated maximum pressure - and continue to cycle, but with no fuel output.
As such, it is not well-suited for continuous operation/low demand applications such as heater or stove systems, since it will constantly make noise, and have a shortened service life due to high cycling.
For stove/heater and continuous duty applications, use the Walbro FRD series of pumps, which addresses these issues. See Related Products, below.
An FRA pump can be used, however, to fill a gravity-feed day tank commonly used in diesel stove and heater installations.
FRA pumps incorporate a new piston mechanism which, unlike rubber diaphragms, is not affected by modern, high-tech fuel blends.
The FRA is designed to serve as a primary pump (replacing a mechanical fuel pump) or as an auxilliary fuel pump (assisting the existing pump) for internal combustion engines.
The pump self-regulates to its pre-set pressure, pumping more or less fuel as the delivery pressure (head) varies.
FRA pumps are commonly used as replacements for failed mechanical fuel pumps on older engines, where the owner doesn't want to continue using a pump with a rubber diaphragm susceptable to degradation by modern alcohol fuel blends.
They are also commonly used in open flow, low head applications such as fuel polishing.
• Non-adjustable maximum output pressure is factory pre-set in the ranges indicated below
• Output pressure can be further regulated by screwing in, or placing in-line, an adjustable pressure regulator such as the HOL 12-804
• FRA provides low cost with good durability
• Compatible with all commercially available pump grade gasoline, gasoline-alcohol blends, diesel, and bio-diesel fuels
• Continuous duty life (diesel fuel): >5,000 hours
• Flow rates as high as 52 gph, but 30 gph is a more typical maximum
• Current draw averages less than 2 amps
• Self-priming to at least 2 feet; maximum dry run time is 4 hours
• Inlet (bottom)/Outlet (top): 1/8-27 NPSF (Dryseal American National Standard Straight Pipe Thread) — will accept NPT tapered fittings without leaking, thread sealant recommended
• No internal filter - a 70 micron, or finer, pre-filter is recommended
• USCG 16623-1 and 16623-2 approved; ignition protected
• Dichromate coating passes 96 hour salt spray test - not recommended where exposed to saltwater
• Dimensions: 5.43"H x 2.76"Dia.
• Note - a suffix number (typically -1 or -2) in part number refers to type of packaging
• Made in USA
Technical
Selecting among the Walbro FR Series electric fuel pumps:
• All the FR electric pumps provide fuel until the fuel demand decreases, or flow is restricted - but they have different mechanisms for doing so.
FR pumps will cycle (pump) until they build up the pressure (head) in the outflow line - with an accompanying decrease in fuel flow - and reach their factory preset maximum pressure.
At this point, constant frequency pumps like the FRA will continue cycling - but no fuel will flow.
Variable frequency pumps, like the FRB and FRD, will slow and eventually stop cycling as the pressure builds.
If the pressure on the outflow side of the pump drops, both types of pump will start supplying fuel again.
• Choosing an FR Series pump is often less dependent on the application, and more a matter of user preference:
— FRA pumps are lower cost, basic models.
They have no built-in filter, and their constant cycling means electric current draw is constant - regardless of output, they are always making noise, they typically have a shorter lifespan (higher wear), and they can wear unevenly as the stroke can be shortened when operating near their maximal pressure.
— FRB and FRD pumps have a more expensive variable frequency circuit board, always use their full stroke length - so wear is evenly distributed, do not always operate at full capacity/maximal cycling — so less wear, longer life, less noise, and lower average current draw.
Additionally, the FRB models include a built-in/replaceable 70 micron mesh filter, so the user doesn't need to supply a pre-filter.
• What the FR fuel pump is designed to do:
— In carbureted applications - The FRA and FRB fuel pumps self-regulate to their maximum output pressure when the carburetor bowl is full, and respond to float movement in the carburetor as required.
When the engine demands more fuel, the pump increases its flow rate.
When the engine demand drops, the pump reduces its flow rate.
— In diesel applications - The FRA and FRB pumps will deliver fuel to the diesel injector pump, assuring a positive pressure at the injector pump inlet.
These pumps are designed to refill diesel filters after service or replacement.
— In transfer applications, including fuel polishing, FRA and FRB pumps run continuously, as long as electrical power is supplied to the pump, and output back pressure is low.
— In diesel heater and stove applications, the task-specific FRD pumps will slow their cycling rate to deliver only the fuel required by the stove fuel metering valve ("carburetor").
FRD pumps can also fill day tanks in gravity feed installations.
|
331.94 |
|
|
Little Giant Submersible Pump 501086
Little Giant 1-T Submersible Pump
Motor 115 Volt 60 Hz 1/150 HP Permanently Lubricated Oil Filled Motor, 205 GPH at 1 Foot Head, Shutoff Head 7.4 Feet, Inlet: Snap Off Screen, Outlet: 1/4" MNPT with Elbow for 1/2" Tubing, Epoxy Coated Aluminum Housing, Fluid Temperature Up to 120F (49C), UL/CSA Listed, 10 Foot Power Cord
501086 For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild chemicals such as soap solutions, acids, plating solutions and fertilizers
|
181.74 |
|