|
Designed to seal air chamber under deck. Just pop in for a secure, tight fit. Can also be used as livewell or baitwell plug. Bulk.
|
6.59 |
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
Johnson 10-24501-03 Mag Drive Pump 12V CM10P7-1
Johnsons line of compact Magnetic Driven centrifugal pumps, the CM10P7-1 model combine high flow rates with very low electric current consumption, making them ideally suited for circulating water in live fish tanks, heating and cooling systems. Designed for continuous operation with water/glycol mixture (maximum 60% glycol), fresh or salt water. Liquid temperature: Minimum -40F (-40C), Maximum +212F (+100°C).
FEATURES
Pump Body: PPA Thermoplastic
Port Size: 5/8" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-ring:EPDM
Motor: 12 or 24 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 hour motor life. IP67 Rated.
|
198.59 |
|
|
March TE-5.5C-MD Mag-Drive Centrifugal Pump single phase with 115/230V Motor
Applications for the TE-5.5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
The TE-5.5C-MD pumps Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.
Unit System 60Hz 50Hz Max Flow
30 GPM
102 LPM
Max Head
41 FT
9 M
Power
.33 HP
.248 KW
Electrical
1PH 115/230V 3PH 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1"FPT
Outlet
3/4"MPT
Wet End
Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)
|
864.90 |
|
|
Applications for the TE-5.5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower air cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
The TE-5.5C-MD pumps Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.
Unit System 60Hz 50Hz Max Flow
30 GPM
102 LPM
Max Head
41 FT
9 M
Power
.33 HP
.248 KW
Electrical
1PH 115/230V 3PH 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1"FPT
Outlet
3/4"MPT
Wet End
Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)
|
872.10 |
|
|
Johnson 10-24502-03 Mag Drive Pump 12V CM10P7-1
Johnsons line of compact Magnetic Driven centrifugal pumps, the CM10P7-1 model combine high flow rates with very low electric current consumption, making them ideally suited for circulating water in live fish tanks, heating and cooling systems. Designed for continuous operation with water/glycol mixture (maximum 60% glycol), fresh or salt water. Liquid temperature: Minimum -40F (-40C), Maximum +212F (+100°C).
FEATURES
Pump Body: PPA Thermoplastic
Port Size: 5/8" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-ring: EPDM
Motor: 12 or 24 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 hour motor life. IP67 Rated.
|
198.59 |
|
|
Johnson 10-24501-04 Mag Drive Pump 24V CM10P7-1
Johnsons line of compact Magnetic Driven centrifugal pumps, the CM10P7-1 model combine high flow rates with very low electric current consumption, making them ideally suited for circulating water in live fish tanks, heating and cooling systems. Designed for continuous operation with water/glycol mixture (maximum 60% glycol), fresh or salt water. Liquid temperature: Minimum -40F (-40C), Maximum +212F (+100°C).
FEATURES
Pump Body: PPA Thermoplastic
Port Size: 5/8" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-ring:EPDM
Motor: 24 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 hour motor life. IP67 Rated.
|
198.59 |
|
|
Sierra fuel pumps and replacement parts for Johnson/Evinrude/BRP outboards.
|
87.99 |
|
|
Scot Pump 913-VL 06 Vented Loop 5/8"
The Vacuum Breaker has a normally closed poppet which keeps vent line fumes from the vessel. The breaker is designed for a corrosion proof service life with a protected air vent. All of the parts exposed to liquid are manufactured from Delrin. The external poppet spring is stainless steel. Liquid never touches the stainless steel spring.
The vacuum breaker has a low vacuum breakaway.
Pressure on the inside of the loop keeps the breaker closed. The soft, resilient seat gives quiet, trouble-free operation. The spring action provides a quiet opening and closing operation. Air goes in – never out.
• Type 316 Stainless Steel Loop with Vacuum Breaker Standard SAE ( Society of Automotive Engineers) Hose Barb on each end.
• Use for Heads, Bilge Pumps, Shower Pumps, and Engine Exhaust Lines
• Sizes 1/2 inch to 2 inches
• All head flushing water and discharge lines, engine wet exhaust lines, and bilge pump lines should have a vented loop.
• Use on marine heads, engine cooling systems, and bilge pumps.
|
97.24 |
|
|
Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-3/8 Part # 0115-0064-0300 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-3/8 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
2.3 GPM
8.7 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/8"OD
Outlet
3/8"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0300
|
227.18 |
|
|
Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-3/8 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-3/8 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
2.3 GPM
8.7 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/8"OD
Outlet
3/8"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
|
205.73 |
|
|
Sherwood M-71 Engine Cooling Pump
Replaces Cummins 3907458 and 3912019. Also Replaces Sherwood M70.
Pump Body: Bronze
Ports: 1 1/4" Hose
Cam: Full
Impeller: Neoprene
Shaft Seal: Mechanical
Drive: Flange Mounted to Engine.
APPLICATIONS
Flexible Impeller Engine Cooling Pump.
|
616.40 |
|
|
Jabsco 12290 Series Self Priming Pump Phenolic
FEATURES
Pump Body: Phenolic Plastic
Port Size: 5/8" OD for Hose Connections
Flow: 5.8 GPM at 10 feet of head
Pressure: Up to 13 PSI
Impeller: Neoprene, Nitrile or Viton
Shaft Seal: Lip Type
Shaft: Shaft of Motor (Stainless Steel)
Motor: 115 Vac, 1/6 hp, 1750 RPM, 60 Hz, relay start and thermal over-load protector, Three-prong ground plug.
APPLICATIONS
A low cost pump for: transfers, circulation, spill returns, filtration and filling line use. Easily handles pure solutions, foaming liquids, emulsions, suspended solids and ferments with viscosities less than 500 SSU (120 cp). Because the plastic pump is resistant to corrosion and metallic contamination, it is widely used for pumping photo chemicals, plating compounds, lab solutions, pharmaceuticals, cosmetics, weak acids, alkalies, liquid fertilizers, insecticides, dyes, detergents, waxes and many more.
Jabsco Self Priming Pump 5/8" Hose Ports 115V ODP Motor Phenolic Head, Neoprene Impeller
|
808.67 |
|
|
Jabsco 12290 Series Self Priming Pump Phenolic
Pump Body:
Phenolic Plastic
Port Size:
5/8" OD for Hose Connections
Flow:
5.8 GPM at 10 feet of head
Pressure:
Up to 13 PSI
Impeller:
Neoprene, Nitrile or Viton
Shaft Seal:
Lip Type
Shaft:
Shaft of Motor (Stainless Steel)
Motor:
115 Vac, 1/6 hp, 1750 RPM, 60 Hz, relay start and thermal over-load protector, Three-prong ground plug.
APPLICATIONS
Designed as a low cost pump for: transfers, circulation, spill returns, filtration and filling line use. Easily handles pure solutions, foaming liquids, emulsions, suspended solids and ferments with viscosities less than 500 SSU (120 cp). Because the plastic pump is resistant to corrosion and metallic contamination, it is widely used for pumping photo chemicals, plating compounds, lab solutions, pharmaceuticals, cosmetics, weak acids, alkalies, liquid fertilizers, insecticides, dyes, detergents, waxes and many more.
|
888.25 |
|
|
Jabsco 12290 Series Self Priming Pump Phenolic
Pump Body: Phenolic Plastic
Port Size: 5/8" OD for Hose Connections
Flow: 5.8 GPM at 10 feet of head
Pressure: Up to 13 PSI
Impeller: Neoprene, Nitrile or Viton
Shaft Seal: Lip Type
Shaft: Shaft of Motor (Stainless Steel)
Motor: 115 Vac, 1/6 hp, 1750 RPM, 60 Hz, relay start and thermal over-load protector
Three-prong ground plug
APPLICATIONS
A low cost pump for: transfers, circulation, spill returns, filtration and filling line use. Easily handles pure solutions, foaming liquids, emulsions, suspended solids and ferments with viscosities less than 500 SSU (120 cp). Because the plastic pump is resistant to corrosion and metallic contamination, it is widely used for pumping photo chemicals, plating compounds, lab solutions, pharmaceuticals, cosmetics, weak acids, alkalies, liquid fertilizers, insecticides, dyes, detergents, waxes and many more.
Jabsco Self Priming Pump 5/8" Hose Ports 115V Totally Enclosed Motor Phenolic Head, Neoprene Impeller
|
907.92 |
|